Identifying the Frequency Response of Common-Mode Current on a Cable Attached to a PCB

Yoshiki KAYANO; Motoshi TANAKA; Hiroshi INOUE

Identifying the Frequency Response of Common-Mode Current on a Cable Attached to a PCB

Yoshiki KAYANO, Motoshi TANAKA, Hiroshi INOUE

Full Text Views

0

Cite this

Summary :

Common-mode (CM) current on a feed cable attached to printed circuit board (PCB), which is one of main source of undesired electromagnetic radiation problem, is investigated by experimental and finite-difference time-domain (FDTD) modeling. In this paper, frequency responses of CM current on PCB and feed cable are modeled and analyzed as an electromagnetic interference (EMI) antenna, which depends on the configuration of PCB with a wire cable. Several different configurations are prepared to demonstrate the effect of PCB dimension on resonance frequencies of CM current. In the results, EMI antenna in the frequency band around the first resonance frequency was comprised of the ground plane and cable. In order to explain the frequency response of CM current, two EMI antenna models are proposed and demonstrated. EMI antenna is comprised of the ground plane and cable, and the other EMI antenna is comprised of the trace on the ground plane. It is suggested that the result is one of basic consideration for the ground plane with cable that have high EMI problem and resonance frequency of CM current.

Publication: IEICE TRANSACTIONS on Electronics Vol.E87-C No.8 pp.1268-1276

Publication Date: 2004/08/01

Publicized

Online ISSN

DOI

Type of Manuscript: Special Section PAPER (Special Section on IS-EMD2003--Recent Technical Trend of Electro-Mechanical Devices)

Category: Measurement and Evaluation

Cite this

Copy

Yoshiki KAYANO, Motoshi TANAKA, Hiroshi INOUE, "Identifying the Frequency Response of Common-Mode Current on a Cable Attached to a PCB" in IEICE TRANSACTIONS on Electronics, vol. E87-C, no. 8, pp. 1268-1276, August 2004, doi: .
Abstract: Common-mode (CM) current on a feed cable attached to printed circuit board (PCB), which is one of main source of undesired electromagnetic radiation problem, is investigated by experimental and finite-difference time-domain (FDTD) modeling. In this paper, frequency responses of CM current on PCB and feed cable are modeled and analyzed as an electromagnetic interference (EMI) antenna, which depends on the configuration of PCB with a wire cable. Several different configurations are prepared to demonstrate the effect of PCB dimension on resonance frequencies of CM current. In the results, EMI antenna in the frequency band around the first resonance frequency was comprised of the ground plane and cable. In order to explain the frequency response of CM current, two EMI antenna models are proposed and demonstrated. EMI antenna is comprised of the ground plane and cable, and the other EMI antenna is comprised of the trace on the ground plane. It is suggested that the result is one of basic consideration for the ground plane with cable that have high EMI problem and resonance frequency of CM current.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e87-c_8_1268/_p

Copy

@ARTICLE{e87-c_8_1268,
author={Yoshiki KAYANO, Motoshi TANAKA, Hiroshi INOUE, },
journal={IEICE TRANSACTIONS on Electronics},
title={Identifying the Frequency Response of Common-Mode Current on a Cable Attached to a PCB},
year={2004},
volume={E87-C},
number={8},
pages={1268-1276},
abstract={Common-mode (CM) current on a feed cable attached to printed circuit board (PCB), which is one of main source of undesired electromagnetic radiation problem, is investigated by experimental and finite-difference time-domain (FDTD) modeling. In this paper, frequency responses of CM current on PCB and feed cable are modeled and analyzed as an electromagnetic interference (EMI) antenna, which depends on the configuration of PCB with a wire cable. Several different configurations are prepared to demonstrate the effect of PCB dimension on resonance frequencies of CM current. In the results, EMI antenna in the frequency band around the first resonance frequency was comprised of the ground plane and cable. In order to explain the frequency response of CM current, two EMI antenna models are proposed and demonstrated. EMI antenna is comprised of the ground plane and cable, and the other EMI antenna is comprised of the trace on the ground plane. It is suggested that the result is one of basic consideration for the ground plane with cable that have high EMI problem and resonance frequency of CM current.},
keywords={},
doi={},
ISSN={},
month={August},}

Copy

TY - JOUR
TI - Identifying the Frequency Response of Common-Mode Current on a Cable Attached to a PCB
T2 - IEICE TRANSACTIONS on Electronics
SP - 1268
EP - 1276
AU - Yoshiki KAYANO
AU - Motoshi TANAKA
AU - Hiroshi INOUE
PY - 2004
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E87-C
IS - 8
JA - IEICE TRANSACTIONS on Electronics
Y1 - August 2004
AB - Common-mode (CM) current on a feed cable attached to printed circuit board (PCB), which is one of main source of undesired electromagnetic radiation problem, is investigated by experimental and finite-difference time-domain (FDTD) modeling. In this paper, frequency responses of CM current on PCB and feed cable are modeled and analyzed as an electromagnetic interference (EMI) antenna, which depends on the configuration of PCB with a wire cable. Several different configurations are prepared to demonstrate the effect of PCB dimension on resonance frequencies of CM current. In the results, EMI antenna in the frequency band around the first resonance frequency was comprised of the ground plane and cable. In order to explain the frequency response of CM current, two EMI antenna models are proposed and demonstrated. EMI antenna is comprised of the ground plane and cable, and the other EMI antenna is comprised of the trace on the ground plane. It is suggested that the result is one of basic consideration for the ground plane with cable that have high EMI problem and resonance frequency of CM current.
ER -