In this paper, an ultra-thin wave absorber using a resistive patch array closely-placed in front of a back-metal is designed. The positively large susceptance is required for the patch array to cancel out the negatively large input susceptance of the short-circuited ultra-thin spacer behind the array. It is found that the array needs the gap of 1mm, sheet resistance of less than 20Ω/sq. and patch width of more than 15mm to obtain the zero input susceptance of the absorber with the 1/30 wavelength spacer. Moreover, these parameters were designed considering the electromagnetic coupling between the array and back-metal, and the square patch array absorbers with the thickness from 1/30 to 1/150 wavelength were designed.
Sota MATSUMOTO
Aoyama Gakuin University
Ryosuke SUGA
Aoyama Gakuin University
Kiyomichi ARAKI
Tokyo Institute of Technology
Osamu HASHIMOTO
Aoyama Gakuin University
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copy
Sota MATSUMOTO, Ryosuke SUGA, Kiyomichi ARAKI, Osamu HASHIMOTO, "Design of Ultra-Thin Wave Absorber with Square Patch Array Considering Electromagnetic Coupling between Patch Array and Back-Metal" in IEICE TRANSACTIONS on Electronics,
vol. E104-C, no. 12, pp. 681-684, December 2021, doi: 10.1587/transele.2021ECS6005.
Abstract: In this paper, an ultra-thin wave absorber using a resistive patch array closely-placed in front of a back-metal is designed. The positively large susceptance is required for the patch array to cancel out the negatively large input susceptance of the short-circuited ultra-thin spacer behind the array. It is found that the array needs the gap of 1mm, sheet resistance of less than 20Ω/sq. and patch width of more than 15mm to obtain the zero input susceptance of the absorber with the 1/30 wavelength spacer. Moreover, these parameters were designed considering the electromagnetic coupling between the array and back-metal, and the square patch array absorbers with the thickness from 1/30 to 1/150 wavelength were designed.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/transele.2021ECS6005/_p
Copy
@ARTICLE{e104-c_12_681,
author={Sota MATSUMOTO, Ryosuke SUGA, Kiyomichi ARAKI, Osamu HASHIMOTO, },
journal={IEICE TRANSACTIONS on Electronics},
title={Design of Ultra-Thin Wave Absorber with Square Patch Array Considering Electromagnetic Coupling between Patch Array and Back-Metal},
year={2021},
volume={E104-C},
number={12},
pages={681-684},
abstract={In this paper, an ultra-thin wave absorber using a resistive patch array closely-placed in front of a back-metal is designed. The positively large susceptance is required for the patch array to cancel out the negatively large input susceptance of the short-circuited ultra-thin spacer behind the array. It is found that the array needs the gap of 1mm, sheet resistance of less than 20Ω/sq. and patch width of more than 15mm to obtain the zero input susceptance of the absorber with the 1/30 wavelength spacer. Moreover, these parameters were designed considering the electromagnetic coupling between the array and back-metal, and the square patch array absorbers with the thickness from 1/30 to 1/150 wavelength were designed.},
keywords={},
doi={10.1587/transele.2021ECS6005},
ISSN={1745-1353},
month={December},}
Copy
TY - JOUR
TI - Design of Ultra-Thin Wave Absorber with Square Patch Array Considering Electromagnetic Coupling between Patch Array and Back-Metal
T2 - IEICE TRANSACTIONS on Electronics
SP - 681
EP - 684
AU - Sota MATSUMOTO
AU - Ryosuke SUGA
AU - Kiyomichi ARAKI
AU - Osamu HASHIMOTO
PY - 2021
DO - 10.1587/transele.2021ECS6005
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E104-C
IS - 12
JA - IEICE TRANSACTIONS on Electronics
Y1 - December 2021
AB - In this paper, an ultra-thin wave absorber using a resistive patch array closely-placed in front of a back-metal is designed. The positively large susceptance is required for the patch array to cancel out the negatively large input susceptance of the short-circuited ultra-thin spacer behind the array. It is found that the array needs the gap of 1mm, sheet resistance of less than 20Ω/sq. and patch width of more than 15mm to obtain the zero input susceptance of the absorber with the 1/30 wavelength spacer. Moreover, these parameters were designed considering the electromagnetic coupling between the array and back-metal, and the square patch array absorbers with the thickness from 1/30 to 1/150 wavelength were designed.
ER -