This paper presents 10-Gbit/s bidirectional and 20-Gbit/s unidirectional wireless data transmission systems using 120-GHz-band finline orthomode transducers (OMTs). A new finline OMT was fabricated with two improved designs, to adapt it to the data transmission characteristics of the 120-GHz-band wireless link. One improvement is higher isolation between orthogonal ports and the other is lower group delay variation. The measured isolation is more than 59dB at the carrier frequency of the 120-GHz-band wireless link, and the measured group delay variation is 43ps. Using the finline OMT, we developed 10-Gbit/s bidirectional and 20-Gbit/s unidirectional wireless equipment that can transmit two channels of 10-Gbit/s data using polarization multiplexing. With this wireless equipment, we succeeded in 10-Gbit/s bidirectional and 20-Gbit/s unidirectional wireless data transmission, which leads to successful seamless connection to 10 Gigabit Ethernet and 12-ch high definition television signal transmission.
Jun TAKEUCHI
NTT Corporation
Akihiko HIRATA
NTT Corporation
Hiroyuki TAKAHASHI
NTT Corporation
Naoya KUKUTSU
NTT Corporation
Yoshiaki YAMADA
NTT Corporation
Kei KITAMURA
NTT Corporation
Mitsuhiro TESHIMA
NTT Corporation
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copy
Jun TAKEUCHI, Akihiko HIRATA, Hiroyuki TAKAHASHI, Naoya KUKUTSU, Yoshiaki YAMADA, Kei KITAMURA, Mitsuhiro TESHIMA, "10-Gbit/s Bidirectional and 20-Gbit/s Unidirectional 2-ch Wireless Data Transmission System Using 120-GHz-Band Finline Orthomode Transducers" in IEICE TRANSACTIONS on Electronics,
vol. E97-C, no. 2, pp. 101-110, February 2014, doi: 10.1587/transele.E97.C.101.
Abstract: This paper presents 10-Gbit/s bidirectional and 20-Gbit/s unidirectional wireless data transmission systems using 120-GHz-band finline orthomode transducers (OMTs). A new finline OMT was fabricated with two improved designs, to adapt it to the data transmission characteristics of the 120-GHz-band wireless link. One improvement is higher isolation between orthogonal ports and the other is lower group delay variation. The measured isolation is more than 59dB at the carrier frequency of the 120-GHz-band wireless link, and the measured group delay variation is 43ps. Using the finline OMT, we developed 10-Gbit/s bidirectional and 20-Gbit/s unidirectional wireless equipment that can transmit two channels of 10-Gbit/s data using polarization multiplexing. With this wireless equipment, we succeeded in 10-Gbit/s bidirectional and 20-Gbit/s unidirectional wireless data transmission, which leads to successful seamless connection to 10 Gigabit Ethernet and 12-ch high definition television signal transmission.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/transele.E97.C.101/_p
Copy
@ARTICLE{e97-c_2_101,
author={Jun TAKEUCHI, Akihiko HIRATA, Hiroyuki TAKAHASHI, Naoya KUKUTSU, Yoshiaki YAMADA, Kei KITAMURA, Mitsuhiro TESHIMA, },
journal={IEICE TRANSACTIONS on Electronics},
title={10-Gbit/s Bidirectional and 20-Gbit/s Unidirectional 2-ch Wireless Data Transmission System Using 120-GHz-Band Finline Orthomode Transducers},
year={2014},
volume={E97-C},
number={2},
pages={101-110},
abstract={This paper presents 10-Gbit/s bidirectional and 20-Gbit/s unidirectional wireless data transmission systems using 120-GHz-band finline orthomode transducers (OMTs). A new finline OMT was fabricated with two improved designs, to adapt it to the data transmission characteristics of the 120-GHz-band wireless link. One improvement is higher isolation between orthogonal ports and the other is lower group delay variation. The measured isolation is more than 59dB at the carrier frequency of the 120-GHz-band wireless link, and the measured group delay variation is 43ps. Using the finline OMT, we developed 10-Gbit/s bidirectional and 20-Gbit/s unidirectional wireless equipment that can transmit two channels of 10-Gbit/s data using polarization multiplexing. With this wireless equipment, we succeeded in 10-Gbit/s bidirectional and 20-Gbit/s unidirectional wireless data transmission, which leads to successful seamless connection to 10 Gigabit Ethernet and 12-ch high definition television signal transmission.},
keywords={},
doi={10.1587/transele.E97.C.101},
ISSN={1745-1353},
month={February},}
Copy
TY - JOUR
TI - 10-Gbit/s Bidirectional and 20-Gbit/s Unidirectional 2-ch Wireless Data Transmission System Using 120-GHz-Band Finline Orthomode Transducers
T2 - IEICE TRANSACTIONS on Electronics
SP - 101
EP - 110
AU - Jun TAKEUCHI
AU - Akihiko HIRATA
AU - Hiroyuki TAKAHASHI
AU - Naoya KUKUTSU
AU - Yoshiaki YAMADA
AU - Kei KITAMURA
AU - Mitsuhiro TESHIMA
PY - 2014
DO - 10.1587/transele.E97.C.101
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E97-C
IS - 2
JA - IEICE TRANSACTIONS on Electronics
Y1 - February 2014
AB - This paper presents 10-Gbit/s bidirectional and 20-Gbit/s unidirectional wireless data transmission systems using 120-GHz-band finline orthomode transducers (OMTs). A new finline OMT was fabricated with two improved designs, to adapt it to the data transmission characteristics of the 120-GHz-band wireless link. One improvement is higher isolation between orthogonal ports and the other is lower group delay variation. The measured isolation is more than 59dB at the carrier frequency of the 120-GHz-band wireless link, and the measured group delay variation is 43ps. Using the finline OMT, we developed 10-Gbit/s bidirectional and 20-Gbit/s unidirectional wireless equipment that can transmit two channels of 10-Gbit/s data using polarization multiplexing. With this wireless equipment, we succeeded in 10-Gbit/s bidirectional and 20-Gbit/s unidirectional wireless data transmission, which leads to successful seamless connection to 10 Gigabit Ethernet and 12-ch high definition television signal transmission.
ER -