Femtocell has been considered as a key promising technology to improve the capacity of a cellular system. However, the femtocells deployed inside a macrocell coverage are potentially suffered from excessive interference. This paper proposes a novel radio resource optimization in closed access femtocell networks based on bat algorithm. Bat algorithm is inspired by the behavior of bats in their echolocation process. While the original bat algorithm is designed to solve the complex optimization problem in continuous search space, the proposed modified bat algorithm extends the search optimization in a discrete search space which is suitable for radio resource allocation problem. The simulation results verify the convergence of the proposed optimization scheme to the global optimal solution and reveal that the proposed scheme based on modified bat algorithm facilitates the improvement of the femtocell network capacity.

An implementation of photometric stereo is described in which all directions of illumination are close to and rotationally symmetric about the viewing direction. THis has practical value but gives rise to a problem that is numerically ill-conditioned. Ill-conditioning is overcome in two ways. First, many more than the theoretical minimum number of images are acquired. Second, principal components analysis (PCA) is used as a linear preprocessing technique to determine a reduced dimensionality subspace to use as input. The approach is empirical. The ability of a radial basis function (RBF) neural network to do non-parametric functional approximation is exploited. One network maps image irradiance to surface normal. A second network maps surface normal to image irradiance. The two networks are trained using samples from a calibration sphere. Comparison between the actual input and the inversely predicted input is used as a confidence estimate. Results on real data are demonstrated.

A cooperative relaying system with transmission scheduling is investigated. Cooperative relaying is composed of multiple links because the source sends the data to more than one receiver, and the destination receives multiple data transmitted by more than one transmitter. Therefore, if the source can transmit the data when the channel gains of the links are high, it is not clear which channel gains should be high in order to achieve high spectral efficiency. In the present letter, the spectral efficiency of a cooperative relaying system is theoretically derived under the assumption that the source transmits the data only when the channel gains of links are above certain threshold values. Numerical results reveal that a high spectral efficiency can be achieved by assuring a high channel gain for the link with the highest average received power among links to the destination.

This paper proposes a new method to determine the shape of a surface by learning the mapping between three image irradiances observed under illumination from three lighting directions and the corresponding surface gradient. The method uses Phong reflectance function to describe specular reflectance. Lambertian reflectance is included as a special case. A neural network is constructed to estimate the values of reflectance parameters and the object surface gradient distribution under the assumption that the values of reflectance parameters are not known in advance. The method reconstructs the surface gradient distribution after determining the values of reflectance parameters of a test object using two step neural network which consists of one to extract two gradient parameters from three image irradiances and its inverse one. The effectiveness of this proposed neural network is confirmed by computer simulations and by experiment with a real object.

Distributed detection techniques of multiple-input multiple-output (MIMO) spatially multiplexed signals are studied in this paper. This system considered employs multiple mobile stations (MSs) to receive signals from a base station, and then share their received signal waveforms with collaborating MSs. In order to reduce the amount of traffic over the collaborating wireless links, distributed detection techniques are proposed, in which multiple MSs are in charge of detection by making use of both the shared signal waveforms and its own received waveform. Selection combining schemes of detected bit sequences are studied to finalize the decisions. Residual error coefficients in iterative MIMO equalization and detection are utilized in this selection. The error-ratio performance is elucidated not only by computer simulations, but also by offline processing using experimental signals recorded in a measurement campaign.

In this paper, we describe a novel technique to extract a polyhedral description from panoramic range data of a scene taken by a panoramic laser range finder. First, we introduce a reasonable noise model of the range data acquired with a laser radar range finder, and derive a simple and efficient approximate solution of the optimal fitting of a local plane in the range data under the assumed noise model. Then, we compute the local surface normals using the proposed method and extract stable planar regions from the range data by using both the distribution information of local surface normals and their spatial information in the range image. Finally, we describe a method which builds a polyhedral description of the scene using the extracted stable planar regions of the panoramic range data with 360 field of view in a polar coordinate system. Experimental results on complex real range data show the effectiveness of the proposed method.

This paper investigates the influence of channel estimation error on the precoding matrix selection and signal detection for MIMO multiplexing using precoding in the downlink OFDM radio access. In a simulation, we assume codebook-based unitary precoding and signal detection that employs a minimum mean squared error (MMSE) based interference suppression filter. The simulation results clarify the effect of the channel estimation error with respect to the precoding matrix selection and signal detection from the viewpoints of the number of streams, i.e., rank order, the number of transmit antennas, the modulation scheme and channel coding rate, and codebook size, i.e., quantization for precoding matrix feedback information.

In order to verify the channel sum-rate improvement by multi-user multiple-input multiple-output (MU-MIMO) transmission in distributed antenna systems (DASs), we investigate and compare the characteristics of channel sum-rates in both centralized antenna systems (CASs) and DASs under the effects of path loss, spatially correlated shadowing, correlated multi-path fading, and inter-cell interference. In this paper, we introduce two different types of functions to model the shadowing, auto-correlation and cross-correlation, and a typical exponential decay function to model the multi-path fading correlation. Thus, we obtain the distribution of the channel sum-rate and investigate its characteristics. Computer simulation results indicate that DAS can improve the performance of the channel sum-rate compared to CAS, even in the case under consideration. However, this improvement decreases as interference power increases. Moreover, the decrease in the channel sum-rate due to the increase in the interference power becomes slow under the effect of shadowing correlation. In addition, some other analyses on the shadowing correlation that occurs on both the transmit and receiver sides are provided. These analysis results show that the average channel sum-rate in a DAS without inter-cell interference considerably decreases because of the shadowing correlation. In contrast, there appears to be no change in the CAS. Furthermore, there are two different types of sum-rate changes in a DAS because of the difference in shadowing auto-correlation and cross-correlation.

In this paper, we will report on a fiber optic oxygen sensor using fluorescence and its application to clinical examinations. It is based on fluorescence quenching. The quenching ratio of fluorescence is proportional to oxygen partial pressure by Stern-Volmer's formula in which oxygen concentration is estimated from measured emission intensity. We fabricated a microscopic luminous probe using a Solvent Green 5 doped plastic optical fiber coupler. The probes were demonstrated to have certain advantages for example they can be operated in both liquid and gas phases. And also, they are stable to pH and flow velocities. As a clinical application, the probe can reliably measure oxygen concentrations of whole blood in vivo. Moreover, we have clarified various characteristics of this probe.

LTE-Advanced supports asymmetric carrier aggregation (CA) to achieve flexible bandwidth allocation by applying different numbers of component carriers (CCs) between the downlink and uplink. This paper experimentally clarifies the achievable downlink throughput performance when uplink control information (UCI) feedback mechanism using the physical uplink shared channel (PUSCH), which enables minimization of the UCI overhead while maintaining the required reception quality, is applied in asymmetric CA. The laboratory experimental results show that the stable reception quality control of the channel quality information (CQI) with the target block error rate (BLER) of 10-1 to 10-2 is achieved irrespective of the average received signal-to-noise power ratio (SNR) when the control offset parameter of approximately 1.25 is used. We also show that the achievable downlink throughput when the CQI error is considered is almost the same as that in no CQI error case. Furthermore, based on the experimental results in a real field environment, a suburban area of Yokosuka city in Japan, we confirm stable adaptive modulation and coding (AMC) operation including target BLER control of the CQI on the PUSCH in asymmetric CA. The field experimental results also show that when CA with 5 CCs (90-MHz bandwidth) and 2-by-2 rank-2 multiple-output multiple-input (MIMO) multiplexing are employed in the downlink, the peak throughput of approximately 640Mbps is achieved even considering the CQI error.

We consider user selection schemes for multi-user MIMO systems with linear precoding. In this work, we apply two user selection schemes based on the orthogonality between the propagation channel of MSs. Indoor transmission experiments are carried out under several scenarios and the performances of user selection schemes are evaluated. It is shown that the transmission performance is improved and the user selection schemes are remarkably affected by the path loss between MSs.

This paper proposes a novel iterative multiple-input multiple-output (MIMO) receiver for orthogonal frequency division multiplexing (OFDM) systems, named as an “iterative MIMO receiver employing virtual channels with a Turbo decoder.” The proposed MIMO receiver comprises a MIMO detector with virtual channel detection and a Turbo decoder, between which signals are exchanged iteratively. This paper proposes a semi hard input soft output (SHISO) iterative decoding for the iterative MIMO receiver that achieves better performance than a soft input soft output (SISO) iterative decoding. Moreover, this paper proposes a new criterion for the MIMO detector to select the most likely virtual channel. The performance of the proposed receiver is verified in a 6×2 MIMO-OFDM system by computer simulation. The proposed receiver achieves better performance than the SISO MAP iterative receiver by 1.5dB at the bit error rate (BER) of 10-4, by optimizing the number of the Turbo iteration per the SHISO iteration. Moreover, the proposed detection criterion enables the proposed receiver to achieve a gain of 3.0dB at the BER of 10-5, compared with the SISO MAP iterative receiver with the Turbo decoder.

This paper presents comprehensive comparisons on the block error rate (BLER) performance of rate-one open-loop (OL) transmit diversity schemes with four antennas for discrete Fourier transform (DFT)-precoded Orthogonal Frequency Division Multiple Access (OFDMA). One candidate scheme employs a quasi-orthogonal (QO) - space-time block code (STBC) in which four-branch minimum mean-square error (MMSE) combining is achieved at the cost of residual inter-code interference (ICI). Another candidate employs a combination of the STBC and selection transmit diversity called time switched transmit diversity (TSTD) (or frequency switched transmit diversity (FSTD)). We apply a turbo frequency domain equalizer (FDE) associated with iterative decision-feedback channel estimation (DFCE) using soft-symbol estimation to reduce channel estimation (CE) error. The turbo FDE includes an ICI canceller to reduce the influence of the residual ICI for the QO-STBC. Based on link-level simulation results, we show that a combination of the STBC and TSTD (or FSTD) is suitable as a four-antenna OL transmit diversity scheme for DFT-precoded OFDMA using the turbo FDE and iterative DFCE.

We have fabricated several two-dimensional photonic-crystal (2DPC) slab waveguides by using fine electron beam lithography and dry etching. The 2DPC waveguides include straight, bend, Y-branch, directional coupler, and coupled-cavity waveguides on the GaAs/AlGaAs substrate as an application to the ultra-small and ultra-fast all-optical switching device. Transmission spectra and near field patterns were characterized in a wide wavelength range from 850 to 1600 nm with the sample finished to the air-bridge type 2DPC slab. These waveguides appear to be suitable for achieving the waveguide platform in the symmetrical-Mach-Zehnder device.

In the present paper, the use of a combination of channel-bonding and multi-channel techniques is proposed to improve the performance of wireless mesh networks (WMNs). It is necessary to increase the network throughput by broadening the bandwidth, and two approaches to effectively utilize the broadened bandwidth can be considered. One is the multi-channel technique, in which multiple separate frequency channels are used simultaneously for information transmission. The other is the channel-bonding technique used in IEEE 802.11n, which joins multiple frequency channels into a single broader channel. The former can reduce the channel traffic to mitigate the effect of packet collision, while the latter can increase the transmission rate. In the present paper, these two approaches are compared and their respective advantages are clarified in terms of the network throughput and delay performance assuming the same total bandwidth and a CSMA protocol. Our numerical and simulation results indicate that under low-traffic conditions, the channel-bonding technique can achieve low delay, while under traffic congestion conditions, the network performance can be improved by using multi-channel technique. Based on this result, the use of a combination of these two techniques is proposed for a WMN, and show that it is better to use a proper channel technique according to the network traffic condition. The findings of the present study also contribute to improving the performance of a multimedia network, which consists of different traffic types of applications.

We propose the extended Bezier spiral in this paper. The spiral is useful for both design purposes and improved aesthetics. This is because the spiral is one of the Bezier curves, which play an important role in interactive curve design, and because the assessment of the curve is based on the human reception of the curve. For the latter purpose we utilize the logarithmic distribution graph that quantifies the designers' preferences. This paper contributes the unification of the two different curve design objectives (the interactive operation and so called "eye pleasing" result generation); which have been independently investigated so far.

Triggered by the explosion of mobile traffic, 5G (5th Generation) cellular network requires evolution to increase the system rate 1000 times higher than the current systems in 10 years. Motivated by this common problem, there are several studies to integrate mm-wave access into current cellular networks as multi-band heterogeneous networks to exploit the ultra-wideband aspect of the mm-wave band. The authors of this paper have proposed comprehensive architecture of cellular networks with mm-wave access, where mm-wave small cell basestations and a conventional macro basestation are connected to Centralized-RAN (C-RAN) to effectively operate the system by enabling power efficient seamless handover as well as centralized resource control including dynamic cell structuring to match the limited coverage of mm-wave access with high traffic user locations via user-plane/control-plane splitting. In this paper, to prove the effectiveness of the proposed 5G cellular networks with mm-wave access, system level simulation is conducted by introducing an expected future traffic model, a measurement based mm-wave propagation model, and a centralized cell association algorithm by exploiting the C-RAN architecture. The numerical results show the effectiveness of the proposed network to realize 1000 times higher system rate than the current network in 10 years which is not achieved by the small cells using commonly considered 3.5GHz band. Furthermore, the paper also gives latest status of mm-wave devices and regulations to show the feasibility of using mm-wave in the 5G systems.

This letter considers the weighted sum-rate maximization (WSRMax) problem in downlink multicell multiuser orthogonal frequency-division multiplexing system. The WSRMax problem under per base station transmit power constraint is known to be NP-hard, and the optimal solution is computationally very expensive. We propose two less-complex suboptimal convex approximated solutions which are based on sequential parametric convex approximation approach. We derive provably faster convergent iterative convex approximation techniques that locally optimize the weighted sum-rate function. Both the iterative solutions are found to converge to the local optimal solution within a few iterations compared to other well-known techniques. The numerical results demonstrate the effectiveness and superiority of the proposed approaches.

In the present paper, the performance of cooperative relaying networks with adaptive relaying scheme selection is analyzed. Cooperative relaying is a new technique to achieve spatial diversity gain by using neighboring stations. However, when multiple stations transmit simultaneously, the number of interference signals increases. Therefore, the introduction of cooperative relaying in radio communication systems does not always increase the network capacity due to the co-channel interference. Therefore, in order to achieve high spectral efficiency, it is necessary to select cooperative relaying or non-cooperative relaying adaptively. Assuming both centralized and decentralized adaptive controls, the spectrum efficiency is evaluated. The performance under decentralized control is evaluated using a game-theoretic approach. Simulation results show that the introduction of cooperative relaying with centralized control always increases the spectral efficiency. On the other hand, Simulation results also show that, when each source selects a relaying scheme independently and selfishly to maximize its own spectral efficiency, the introduction of the cooperative relaying may reduce the spectral efficiency due to the increase in the number of interference signals.

A batch process is a typical concurrent system in which multiple interacting tasks are carried out in parallel on several batches at the same time. A major difficulty in designing a batch control system is the lack of modeling techniques. This paper aims at developing a method of constructing batch control system models in a hierarchical manner and operating batch processes using the constructed models. For this purpose, it first defines process and plant specifications described by partial languages, next presents a procedure for constructing hierarchical Petri net based models, and states the verification of models based on reachability analysis. It also discusses the detection of faults and conflicts in batch processes based on place-invariant analysis.