This paper presents an analog front-end circuit for a 60-GHz proximity wireless communication receiver. The feature of the proposed analog front-end circuit is a bandwidth more than 1-GHz wide. To expand the bandwidth of a low-pass filter and a voltage gain amplifier, a technique to reduce the parasitic capacitance of a transconductance amplifier is proposed. Since the bandwidth is also limited by on-resistance of the ADC sampling switch, a switch separation technique for reduction of the on-resistance is also proposed. In a high-speed ADC, the SNDR is limited by the sampling jitter. The developed high resolution VCO auto tuning effectively reduces the jitter of PLL. The prototype is fabricated in 65nm CMOS. The analog front-end circuit achieves over 1-GHz bandwidth and 27.2-dB SNDR with 224mW Power consumption.

Transmission performance of a multi-input multi-output (MIMO) antenna system (i.e., antenna diversity, adaptive antenna array, and space division multiplexing) highly depends on the arrival angle distribution of propagation paths. In this letter, a multipath fading simulator based on distributed scattering model is presented. The impacts of the arrival angle distribution of propagation paths on the bit error rates (BER) performance are measured using an implemented fading simulator and compared with the theoretically predicted performance.

We propose two types of active directional couplers to assure high TX cancellation: an asymmetric type and a symmetric type. For attaining low receiving through loss, coupling capacitors used in conventional couplers are replaced by amplifiers in the proposed active directional couplers. The asymmetric active directional coupler is composed of a small number of components and simple structure. The symmetric active directional coupler has wide-bandwidth TX cancellation. Measurement results show that receiving through loss of -5.3 dB and the TX cancellation of -67.6 dB are obtained in the asymmetric active directional coupler, and receiving through loss of -6.7 dB and the TX cancellation of -66.4 dB are obtained in the symmetric active directional coupler. Compared to the asymmetric active directional coupler, the symmetric active directional coupler has advantage of wider bandwidth of 1.25 MHz to reduce TX leakage of less than -55 dB. Both the proposed active directional couplers achieve high TX cancellation, and the symmetric active directional coupler can be applied in a UHF RFID system with 10-m communication range.