An optical-layer adaptive restoration scheme is validated by a real-time experiment and numerical analyses. In this paper, it is assumed that this scheme can adaptively optimize the bitrate (up to 600Gb/s) and an optical reach with 100Gb/s granularity to maintain high-capacity optical signal transmission. The practicality of 600-Gb/s/carrier optical signal transmission over 101.6-km field-installed fiber is confirmed prior to the adaptive restoration experiment. After modifying the field setup, a real-time experiment on network recovery is demonstrated with bitrate adaptation for 600-Gb/s to 400-Gb/s signals. The results indicate that this scheme can restore failed connections with recovery times comparable to those of conventional restoration scheme; thus 99.9999% system availability can be easily attained even under double-link failures. Numerical analysis clarifies that adaptive restoration can recover >80% of double-link failures on several realistic topologies and improvement amount against conventional scheme is semi-statistically characterized by restoration path length.

This paper provides on a theoretical and numerical study of the probability density function (PDF) of the on-off keying (OOK) signals in ASE-limited systems. We present simple closed formulas of PDFs for the optical intensity and the received baseband signal. To confirm the validity of our model, the calculation results yielded by the proposed formulas are compared with those of numerical simulations and the conventional Gaussian model. Our theoretical and numerical results confirm that the signal distribution differs from a Gaussian profile. It is also demonstrated that our model can properly evaluate the signal distribution and the resultant BER performance, especially for systems with an optical bandwidth close to the receiver baseband width.

We demonstrated 1-Tb/s-class transmissions of field-deployed large-core low-loss fiber links, which is compliant with ITU-T G.654.E, using our newly developed real-time transponder consisting of a state-of-the-art 16-nm complementary metal-oxide-semiconductor (CMOS) based digital signal processing application-specific integrated circuit (DSP-ASIC) and an indium phosphide (InP) based high-bandwidth coherent driver modulator (HB-CDM). In this field experiment, we have achieved record transmission distances of 1122km for net data-rate 1-Tb/s transmission with dual polarization-division multiplexed (PDM) 32 quadrature amplitude modulation (QAM) signals, and of 336.6 km for net data-rate 1.2-Tb/s transmission with dual PDM-64QAM signals. This is the first demonstration of applying hybrid erbium-doped fiber amplifier (EDFA) and backward-distributed Raman amplifier were applied to terrestrial G.654.E fiber links. We also confirmed the stability of signal performance over field fiber transmission in wavelength division multiplexed (WDM) condition. The Q-factor fluctuations respectively were only less than or equal to 0.052dB and 0.07dB for PDM-32QAM and PDM-64QAM signals within continuous measurements for 60 minutes.

Multi-band transmission technologies promise to cost-effectively expand the capacity of optical networks by exploiting low-loss spectrum windows beyond the conventional band used in already-deployed fibers. While such technologies offer a high potential for capacity upgrades, available capacity is seriously restricted not only by the wavelength-continuity constraint but also by the signal-to-noise ratio (SNR) constraint. In fact, exploiting more bands can cause higher SNR imbalance over multiple bands, which is mainly due to stimulated Raman scattering. To relax these constraints, we propose wavelength-selective band switching-enabled networks (BSNs), where each wavelength channel can be freely switched to any band and in any direction at any optical node on the route. We also present two typical optical node configurations utilizing all-optical wavelength converters, which can realize the switching proposal. Moreover, numerical analyses clarify that our BSN can reduce the fiber resource requirements by more than 20% compared to a conventional multi-band network under realistic conditions. We also discuss the impact of physical-layer performance of band switching operations on available benefits to investigate the feasibility of BSNs. In addition, we report on a proof-of-concept demonstration of a BSN with a prototype node, where C+L-band wavelength-division-multiplexed 112-Gb/s dual-polarization quadrature phase-shift keying signals are successfully transmitted while the bands of individual channels are switched node-by-node for up to 4 cascaded nodes.

This study numerically investigates the symbol-level allocation of four-level pulse-amplitude modulation (PAM4) signals for optically pre-amplified receiver systems. Three level-allocation schemes are examined: intensity-equispaced, amplitude-equispaced, and numerically optimized. Numerical simulations are conducted to comprehensively compare the receiver sensitivities for these level-allocation schemes under various system conditions. The results show that the superiority or inferiority between the level allocations is significantly dependent on the system conditions of the bandwidth of amplified spontaneous emission light, modulation bandwidth, and signal extinction ratio (ER). The mechanisms underlying these dependencies are also discussed.