Over 100 Gbit/s/ch high-speed optical transmission is required to achieve the high capacity networks that can meet future demands. The coherent receiver, which is expected to yield high frequency utilization, is a promising means of achieving such high-speed transmission. However, it requires a high-speed Analog to Digital Converter (ADC) because the received signal bandwidth would be over several tens or hundreds of GHz. To solve this problem, we propose a band-divided receiver structure for wideband optical signals. In the receiver, received wideband signals are divided into a number of narrow band signals without any guard band. We develop a band-divided receiver prototype and evaluate it in an experiment. In addition, we develop a real-time OFDM demodulator on an FPGA board that implements 1.5 GS/s ADCs. We demonstrate that the band-divided receiver prototype with its real-time OFDM demodulator and 1.5 GS/s ADC can demodulate single polarization 12 Gbit/s OFDM signals in real-time.

This paper investigates approaches that can cancel nonlinear phase noise effectively for the phase-conjugate pair diversity transmission of 16-QAM WDM signals through multi-core fiber. The geometric mean is introduced for the combination of the phase-conjugate pair. A numerical simulation suggests that span-by-span chromatic dispersion compensation is more effective at cancelling phase noise in long distance transmission than lumped compensation at the receiver. Simulations suggest the span-wise compensation described herein yields Q-value enhancement of 7.8 and 6.8dB for CD values of 10 and 20.6ps/nm/km, respectively, whereas the lumped compensation equivalent attains only 3.5dB. A 1050km recirculating loop experiment confirmed a Q-value enhancement of 4.1dB for 20.6ps/nm/km, span-wise compensation transmission.

This paper describes a blind frequency offset estimator (FOE) with wide frequency range for coherent quadrature amplitude modulation (QAM) receivers. The FOE combines a spectrum-based frequency offset estimation algorithm as a coarse estimator with a frequency offset estimation algorithm using the periodogram as a fine estimator. To establish our design methodology, each block of the FOE is rigorously analyzed by using formulas and the minimum fast Fourier transform (FFT) size that generates a frequency spectrum for both the coarse and fine estimators is determined. The coarse estimator's main feature is that all estimation processes are carried out in the frequency domain, which yields convergence more than five times faster than that of conventional estimators. The estimation frequency range of the entire FOE is more than 1.8 times wider than that of conventional FOEs. Experiments on coherent optical 64-ary QAM (64-QAM) reveal that frequency offset estimation can be achieved under a frequency offset value greater than the highest value of the conventional estimation range.

A novel optical high order quadrature amplitude modulation (QAM) transmission system for high-speed short links is described. Dual-polarization (DP) QAM and twin local lights are generated from one light source in the system, and these lightwaves are simultaneously transmitted via standard single mode fiber. The receiver can be constructed simply because it does not require a coherent light source under wavelength control. The system enables a 3.1 Gbaud DP-16-QAM signal to be successfully demodulated after 80-km transmission without using an optical dispersion compensator. It also achieves high tolerance against phase noise in the signal light source.

We developed a polarization-independent and reserved-band-less complementary spectral inverted optical phase conjugation (CSI-OPC) device using dual-band difference frequency generation based on highly efficient periodically poled LiNbO3 waveguide technologies. To examine the nonlinearity mitigation in a long-haul transmission using a large number of OPCs, we installed a CSI-OPC device in the middle of a pure silica core fiber-based recirculating loop transmission line with a length of 320km. First, we examined the fiber-input power tolerance after 5,120-km and 6,400-km transmission using 22.5-Gbaud PDM-16QAM 10-channel DWDM signals and found a Q-factor improvement of over 1.3dB along with enhanced power tolerance thanks to mitigating the fiber nonlinearity. We then demonstrated transmission distance extension using the CSI-OPC device. The use of multiple CSI-OPCs enables an obvious performance improvements attained by extending the transmission distance from 6,400km to 8,960km, which corresponds to applying the CSI-OPC device 28 times. Moreover, there was no Q-factor degradation for the link in a linear regime after applying the CSI-OPC device more than 16 times. These results demonstrate that the CSI-OPC device can improve the nonlinear tolerance of PDM-16QAM signals without an excess penalty.

Optical phase conjugation (OPC) is an all-optical signal processing technique for mitigating fiber nonlinearity and is promising for building cost-efficient fiber networks with few optic-electric-optic conversions and long amplification spacing. In lumped amplified systems, OPC has a little nonlinearity mitigation efficiency for nonlinear distortion induced by cross-phase modulation (XPM) due to the asymmetry of power and chromatic dispersion (CD) maps during propagation in transmission fiber. In addition, the walk-off of XPM-induced noise becomes small due to the CD compensation effect of OPC, so the deterministic nonlinear distortion increases. Therefore, lumped amplified transmission systems with OPC are more sensitive to channel spacing than conventional systems. In this paper, we show the channel spacing dependence of NZ-DSF transmission using amplification repeater with OPC. Numerical simulations show comprehensive characteristics between channel spacing and CD in a 100-Gbps/λ WDM signal. An experimental verification using periodically poled LiNbO3-based OPC is also performed. These results suggest that channel spacing design is more important in OPC-assisted systems than in conventional dispersion-unmanaged systems.

Multi-band WDM transmission beyond the C+L-band is a promising technology for achieving larger capacity transmission by a limited number of installed fibers. In addition to the C- and L-band, we can expect to use the S-band as the next band. Although the development of optical components for new bands, particularly transceivers, entails resource dispersion, which is one of the barriers to the realization of multi-band systems, wavelength conversion by transparent all-optical signal processing enables new wavelength bandtransmission using existing components. Therefore, we proposed a transmission system including a new wavelength band such as the S-band and made it possible to use a transceiver for the existing band by performing the whole-band wavelength conversion without using a transceiver for the new band. As a preliminary verification to demonstrate multi-band WDM transmission including S-band, we investigated the application of a novel wavelength converter between C-band and S-band, which consists of periodically poled lithium niobate waveguide, to the proposed system. We first characterized the conversion efficiency and noise figure of the wavelength converter and estimated the transmission performance of the system through the wavelength converter. Using the evaluated wavelength converters and test signals of 64 channels arranged in the C-band at 75-GHz intervals, we constructed an experimental setup for S-band transmission through an 80-km standard single-mode fiber. We then demonstrated error-free transmission of real-time 400-Gb/s DP-16QAM signals after forward error correction decoding. From the experimental results, it was clarified that the wavelength converter which realizes the uniform lossless conversion covering the whole C-band effectively achieves the S-band WDM transmission, and it was verified that the capacity improvement of the multi-band WDM system including the S-band can be expected by applying it in combination with the C+L-band WDM system.

This paper describes ultra-high capacity wavelength-division multiplexed (WDM) transmission technologies for 100-Tbit/s-class optical transport networks (OTNs). First, we review recent advances in ultra-high capacity transmission technologies focusing on spectrally-efficient multi-level modulation techniques and ultra-wideband optical amplification techniques. Next, we describe an ultra-high capacity WDM transmission experiment, in which high speed polarization-division multiplexed (PDM) 16-ary quadrature amplitude modulation (16-QAM), generated by an optical synthesis technique, in combination with coherent detection based on digital signal processing with pilotless algorithms, realize the high spectral efficiency (SE) of 6.4 b/s/Hz. Furthermore, ultra-wideband hybrid optical amplification utilizing distributed Raman amplification (DRA) and C- and extended L-band erbium-doped fiber amplifiers (EDFAs) is shown to realize 10.8-THz total signal bandwidth. By using these techniques, 69.1-Tbit/s transmission is demonstrated over 240-km of pure silica-core fibers (PSCFs). Furthermore, we describe PDM 64-QAM transmission over 160 km of PSCFs with the SE of 9.0 b/s/Hz.

In this paper, we use frequency-domain equalization (FDE) to create coherent optical single-carrier (CO-SC) transmission systems that are very tolerant of chromatic dispersion (CD) and polarization mode dispersion (PMD). The efficient transmission of a 25-Gb/s NRZ-QPSK signal by using the proposed FDE is demonstrated under severe CD and PMD conditions. We also discuss the principle of FDE and some techniques suitable for implementing CO-SC-FDE. The results show that a CO-SC-FDE system is very tolerant of CD and PMD and can achieve high transmission rates over single mode fiber without optical dispersion compensation.

A new reference voltage generator for megabit DRAMs is proposed. The supply voltage dependence of the generator is successfully suppressed in comparison with the conventional reference voltage circuit. It is shown that the Vcc Margin of DRAM operation can be noticeably improved by using this generator.

High-Tc superconductors convincingly showed that these materials are essentially natural arrays of Josephson junctions formed in atomic scale. In this paper, in-plane aligned a-axis-oriented YBa2Cu3O7-δ (YBCO) thin films were successfully grown on LaSrGaO4(LSGO) (100) substrates which were cleaned by ion-beam. Voltage jumps with hysteresis implying intrinsic Josephson effects are observed in c-axis direction. This result suggest that it is possible to achieve planar intrinsic Josephson devices which have applications in high frequency electronics, such as voltage standards, Josephson masers and so on.

We demonstrated 1-Tb/s-class transmissions of field-deployed large-core low-loss fiber links, which is compliant with ITU-T G.654.E, using our newly developed real-time transponder consisting of a state-of-the-art 16-nm complementary metal-oxide-semiconductor (CMOS) based digital signal processing application-specific integrated circuit (DSP-ASIC) and an indium phosphide (InP) based high-bandwidth coherent driver modulator (HB-CDM). In this field experiment, we have achieved record transmission distances of 1122km for net data-rate 1-Tb/s transmission with dual polarization-division multiplexed (PDM) 32 quadrature amplitude modulation (QAM) signals, and of 336.6 km for net data-rate 1.2-Tb/s transmission with dual PDM-64QAM signals. This is the first demonstration of applying hybrid erbium-doped fiber amplifier (EDFA) and backward-distributed Raman amplifier were applied to terrestrial G.654.E fiber links. We also confirmed the stability of signal performance over field fiber transmission in wavelength division multiplexed (WDM) condition. The Q-factor fluctuations respectively were only less than or equal to 0.052dB and 0.07dB for PDM-32QAM and PDM-64QAM signals within continuous measurements for 60 minutes.