Multi-band WDM transmission beyond the C+L-band is a promising technology for achieving larger capacity transmission by a limited number of installed fibers. In addition to the C- and L-band, we can expect to use the S-band as the next band. Although the development of optical components for new bands, particularly transceivers, entails resource dispersion, which is one of the barriers to the realization of multi-band systems, wavelength conversion by transparent all-optical signal processing enables new wavelength bandtransmission using existing components. Therefore, we proposed a transmission system including a new wavelength band such as the S-band and made it possible to use a transceiver for the existing band by performing the whole-band wavelength conversion without using a transceiver for the new band. As a preliminary verification to demonstrate multi-band WDM transmission including S-band, we investigated the application of a novel wavelength converter between C-band and S-band, which consists of periodically poled lithium niobate waveguide, to the proposed system. We first characterized the conversion efficiency and noise figure of the wavelength converter and estimated the transmission performance of the system through the wavelength converter. Using the evaluated wavelength converters and test signals of 64 channels arranged in the C-band at 75-GHz intervals, we constructed an experimental setup for S-band transmission through an 80-km standard single-mode fiber. We then demonstrated error-free transmission of real-time 400-Gb/s DP-16QAM signals after forward error correction decoding. From the experimental results, it was clarified that the wavelength converter which realizes the uniform lossless conversion covering the whole C-band effectively achieves the S-band WDM transmission, and it was verified that the capacity improvement of the multi-band WDM system including the S-band can be expected by applying it in combination with the C+L-band WDM system.

We describe a field experiment of flexible modulation format adaptation on a real-time 400Gbit/s/ch DSP-LSI. This real-time DSP-LSI features OSNR estimation, practical simplified back propagation, and high gain soft-decision forward error correction. With these techniques, we have successfully demonstrated modulation format allocation and transmission of 56-channel 400Gbit/s-2SC-PDM-16QAM and 200Gbit/s-2SC-PDM-QPSK signals in 216km and 3246km standard single mode fiber, respectively.

Nonlinearity compensation algorithm and soft-decision forward error correction (FEC) are considered as key technologies for future high-capacity and long-haul optical transmission system. In this report, we experimentally demonstrate the following three benefits brought by low complexity perturbation back-propagation nonlinear compensation algorithm in 224Gb/s DP-16QAM transmission over large-Aeff pure silica core fiber; (1) improvement of pre-FEC bit error ratio, (2) reshaping noise distribution to more Gaussian, and (3) reduction of cycle slip probability.