A superscalar RISC processor contains 2.8 million transistors in a die size of 16.2 mm16.5 mm, and utilizes 3.3 V/0.5 µm BiCMOS technology. In order to take advantage of superscalar performance without incurring penalties from a slower clock or a longer pipeline, a tag bit is implemented in the instruction cache to indicate dependency between two instructions. A performance gain of up to 37% is obtained with only a 3.5% area overhead from our superscalar design.

A 32-bit embedded RISC microcontroller core targeted for automotive, industrial, and PC-peripheral applications has been developed to offer the smaller code size, lower-latency instruction and interrupt processing needed for next-generation microcontrollers. The 360 MIPS/400MFLOPS/200 MHz core--based on the Harvard bus architecture--uses 0.13/0.15-µm CMOS technology and consists of a CPU, FPU, and register banks. To reduce the size of the control programs, new instructions have been added to the instruction set. These new instructions, as well as an enhanced C compiler, produce object files about 25% smaller than those for a previous designed core. A dual-issue superscalar structure consisting of three- or five-stage pipelines provides instruction processing with low latency. The cycle performance is thus an average of 1.8 times faster than the previous designed core. The superscalar structure is used to save 19 CPU registers in parallel when executing interrupt processing. That is, it saves the 19 CPU registers to the resister bank by accessing four registers at a time. This structure significantly improves interrupt response time from 37 cycles to 6 cycles.