1-2hit |
Jun ASANO Jiro HIROKAWA Hiroshi NAKANO Yasutake HIRACHI Hiroshi ISONO Atsushi ISHII Makoto ANDO
As a first step towards the realization of high-efficiency on-chip antennas for 60GHz-band wireless personal area networks, this paper proposes the fabrication of a patch antenna placed on a 200µm thick dielectric resin and fed through a hole in a silicon chip. Despite the large tan δ of the adopted material (0.015 at 50GHz), the thick resin reduces the conductor loss at the radiating element and a radiation efficiency of 78%, which includes the connecting loss from the bottom is predicted by simulation. This calculated value is verified in the millimeter-wave band by experiments in a reverberation chamber. Six stirrers are installed, one on each wall in the chamber, to create a statistical Rayleigh environment. The manufactured prototype antenna with a test jig demonstrates the radiation efficiency of 75% in the reverberation chamber. This agrees well with the simulated value of 76%, while the statistical measurement uncertainty of our handmade reverberation chamber is calculated as ±0.14dB.
Naoya OIKAWA Jiro HIROKAWA Hiroshi NAKANO Yasutake HIRACHI Hiroshi ISONO Atsushi ISHII Makoto ANDO
For the realization of a high-efficiency antenna for 60GHz-band wireless personal area network, we propose placing a CMOS RF circuit and an antenna on opposing sides of a silicon chip. They are connected with low loss by a coaxial-line structure using a hole opening in the chip. Since the CMOS circuit is driven differentially, a differential-feed antenna is used. In this paper, we design and measure a differential-feed square patch antenna on a silicon chip. To enhance the radiation efficiency, it is placed on a 200µm thick resin layer. The calculated radiation efficiency of 79% includes the connection loss. A prototype antenna is measured in a reverberation chamber, and its radiation efficiency is estimated to be about 81±3%.