“Internet of Things” (IoT) requires information to be collected from “anything”, “anytime”, and “anywhere”. In order to achieve this, wireless devices are required that have (1) automatic data acquisition capability, (2) small size, (3) long life, and (4) long range communication capability. One way to meet these requirements is to adopt active Radio Frequency Identification (RFID) systems. Active RFID is more advantageous than passive RFID and enables higher data reading performance over longer distances. This paper surveys active RFID systems, the services they currently promise to provide, technical problems common to these services, and the direction in which research should head in the future. It also reports the results of EPCglobal (EPC: Electronic Product Code) pilot tests conducted on global logistics for tracking ocean/air container transportation using active RFID systems for which we developed several new types of active RFID tags. The test results confirm that our active RFID tags have sufficient capability and low power consumption to well support ocean/air transportation and logistics service.

This paper introduces a flexible, stream-oriented dataflow processing model based on the "Communicating Logic (CL)" framework. As the target architecture, we adopt the dual layered "Plastic Cell Architecture (PCA). " Datapath processing functionality is encapsulated in asynchronous hardware objects with variable graining and implemented using look-up tables. Communication (i.e. connectivity and control) between the distributed processing objects is achieved by means of inter-object message passing. The key point of the CL approach is that it offers the merits of scalable performance, low power hardware implementation with the user friendly compilation and linking capabilities unique to software.

This paper proposes a new processor architecture for manipulating the protocols of digital signal transport systems. In order to offer various kinds of telecommunication services, flexibility as well as high performance is required of digital signal transport systems. To realize such systems, this architecture consists of a core CPU, memories, and dedicated application-specific hardware. Software on the core CPU offers flexibility, while the dedicated hardware provides performance. A computer simulation confirms the efficiency of the architecture.

This paper describes the realization of a dynamically reconfigurable logic LSI based on a novel parallel computer architecture. The key point of the architecture is its dual-structured cell array which enables dynamic and autonomous reconfiguration of the logic circuits. The LSI was completed by successfully introducing two specific features: fully asynchronous logic circuits and a homogeneous structure, only LUTs are used.

Design points and the results seen in the development of a dynamically reconfigurable logic LSI, PCA-2, are described. PCA-2 enables the realization of flexible parallel processing based on the autonomous reconfiguration of logic circuits. To realize this feature, we introduce an asynchronous circuit design and a homogeneous cell array structure. PCA-2 represents an advance on the earlier LSI, PCA-1. Cutting edge CMOS technology is used to realize the structural merits of PCA hardware. Compared to PCA-1, PCA-2 offers 16 times greater integration level for programmable logic. Due to miniaturization and design refinement, PCA-2 provides a 6-fold increase in the circuit frequency of the configuration controller and a 3-fold increase in the operating frequency of the programmable logic. The results gained confirm the effects of refinement and the suitability of our architecture for device miniaturization.

This paper proposes a method for mapping a finite state machine (FSM) into a two-dimensional array of LUTs, which is a part of our plastic cell architecture (PCA). LSIs based on the PCA have already implemented as asynchronous devices. Functions that run on the LSIs must also be asynchronous. In order to make good use of the LSIs, a system that translates functions into circuit information for the PCA is needed. We introduce a prototype system that maps an asynchronous FSM onto the PCA. First, a basic mapping method is considered, and then we create three methods to minimize circuit size. Some benchmark suites are synthesized to estimate their efficiency. Experimental results show that all the methods can map an asynchronous FSM onto the PCA and that the three methods can effectively reduce circuit size.

This paper describes a super high definition (SHD) image processing system we have developed. The computing engine of this system is a parallel processing system with 128 processing elements called NOVI- HiPIPE. A new pipelined vector processor is introduced as a backend processor of each processing element in order to meet the great computing power required by SHD image processing. This pipelined vector processor can achieve 120 MFLOPS. The 128 pipelined vector processors installed in NOVI- HiPIPE yield a total system peak performance of 15 GFLOPS. The SHD image processing system consists of an SHD image scanner, and SHD image storage node, a full color printer, a film recorder, NOVI- HiPIPE, and a Super Frame Memory. The Super Frame Memory can display a ful color moving image sequence at a rate of 60 fps on a CRT monitor at a resolution of 2048 by 2048 pixels. Workstations, interconnected through an Ethernet, are used to control these units, and SHD image data can be easily transfered among the units. NOVI- HiPIPE has a frame memory which can display SHD still images on a color monitor, therefore, one processed frame can be directly displayed. We are developing SHD image processing algorithms and parallel processing methodologies using this system.