Recently, multi-core processors are used in embedded systems very often. Since application programs is much limited running on embedded systems, there must exists an optimal cache memory configuration in terms of power and area. Simulating application programs on various cache configurations is one of the best options to determine the optimal one. Multi-core cache configuration simulation, however, is much more complicated and takes much more time than single-core cache configuration simulation. In this paper, we propose a very fast dual-core L1 cache configuration simulation algorithm. We first propose a new data structure where just a single data structure represents two or more multi-core cache configurations with different cache associativities. After that, we propose a new multi-core cache configuration simulation algorithm using our new data structure associated with new theorems. Experimental results demonstrate that our algorithm obtains exact simulation results but runs 20 times faster than a conventional approach.

Recently, stochastic computing based on stochastic numbers attracts attention as an effective computation method, which realizes arithmetic operations by simple logic circuits with a tolerance of bit errors. When we input two or more identical values to a stochastic circuit, we require to duplicate a stochastic number. However, if bit streams of duplicated stochastic numbers are dependent on each other, their arithmetic operation results can be inaccurate. In this paper, we propose two stochastic number duplicators, called FSR and RRR. The stochastic numbers duplicated by the FSR and RRR duplicators have the equivalent values but have independent bit streams, effectively utilizing bit re-arrangement using randomized bit streams. Experimental evaluation results demonstrate that the RRR duplicator, in particular, obtains more accurate results even if a circuit has re-convergence paths, reducing the mean square errors by 20%-89% compared to a conventional stochastic number duplicator.

Ising machines have attracted attention as they are expected to solve combinatorial optimization problems at high speed with Ising models corresponding to those problems. An induced subgraph isomorphism problem is one of the decision problems, which determines whether a specific graph structure is included in a whole graph or not. The problem can be represented by equality constraints in the words of combinatorial optimization problem. By using the penalty functions corresponding to the equality constraints, we can utilize an Ising machine to the induced subgraph isomorphism problem. The induced subgraph isomorphism problem can be seen in many practical problems, for example, finding out a particular malicious circuit in a device or particular network structure of chemical bonds in a compound. However, due to the limitation of the number of spin variables in the current Ising machines, reducing the number of spin variables is a major concern. Here, we propose an efficient Ising model mapping method to solve the induced subgraph isomorphism problem by Ising machines. Our proposed method theoretically solves the induced subgraph isomorphism problem. Furthermore, the number of spin variables in the Ising model generated by our proposed method is theoretically smaller than that of the conventional method. Experimental results demonstrate that our proposed method can successfully solve the induced subgraph isomorphism problem by using the Ising-model based simulated annealing and a real Ising machine.

Data stored in non-volatile memories may be destructed due to crosstalk and radiation but we can restore their data by using error-correcting codes. However, non-volatile memories consume a large amount of energy in writing. How to reduce maximum writing bits even using error-correcting codes is one of the challenges in non-volatile memory design. In this paper, we first propose Doughnut code which is based on state encoding limiting maximum and minimum Hamming distances. After that, we propose a code expansion method, which improves maximum and minimum Hamming distances. When we apply our code expansion method to Doughnut code, we can obtain a code which reduces maximum-flipped bits and has error-correcting ability equal to Hamming code. Experimental results show that the proposed code efficiently reduces the number of maximum-writing bits.

Non-volatile memory has many advantages such as high density and low leakage power but it consumes larger writing energy than SRAM. It is quite necessary to reduce writing energy in non-volatile memory design. In this paper, we propose write-reduction codes based on error correcting codes and reduce writing energy in non-volatile memory by decreasing the number of writing bits. When a data is written into a memory cell, we do not write it directly but encode it into a codeword. In our write-reduction codes, every data corresponds to an information vector in an error-correcting code and an information vector corresponds not to a single codeword but a set of write-reduction codewords. Given a writing data and current memory bits, we can deterministically select a particular write-reduction codeword corresponding to the data to be written, where the maximum number of flipped bits are theoretically minimized. Then the number of writing bits into memory cells will also be minimized. Experimental results demonstrate that we have achieved writing-bits reduction by an average of 51% and energy reduction by an average of 33% compared to non-encoded memory.

Non-volatile memories are a promising alternative to memory design but data stored in them still may be destructed due to crosstalk and radiation. The data stored in them can be restored by using error-correcting codes but they require extra bits to correct bit errors. One of the largest problems in non-volatile memories is that they consume ten to hundred times more energy than normal memories in bit-writing. It is quite necessary to reduce writing bits. Recently, a REC code (bit-write-reducing and error-correcting code) is proposed for non-volatile memories which can reduce writing bits and has a capability of error correction. The REC code is generated from a linear systematic error-correcting code but it must include the codeword of all 1's, i.e., 11…1. The codeword bit length must be longer in order to satisfy this condition. In this letter, we propose a method to generate a relaxed REC code which is generated from a relaxed error-correcting code, which does not necessarily include the codeword of all 1's and thus its codeword bit length can be shorter. We prove that the maximum flipping bits of the relaxed REC code is still limited theoretically. Experimental results show that the relaxed REC code efficiently reduce the number of writing bits.

Annealing machines such as quantum annealing machines and semiconductor-based annealing machines have been attracting attention as an efficient computing alternative for solving combinatorial optimization problems. They solve original combinatorial optimization problems by transforming them into a data structure called an Ising model. At that time, the bit-widths of the coefficients of the Ising model have to be kept within the range that an annealing machine can deal with. However, by reducing the Ising-model bit-widths, its minimum energy state, or ground state, may become different from that of the original one, and hence the targeted combinatorial optimization problem cannot be well solved. This paper proposes an effective method for reducing Ising model's bit-widths. The proposed method is composed of two processes: First, given an Ising model with large coefficient bit-widths, the shift method is applied to reduce its bit-widths roughly. Second, the spin-adding method is applied to further reduce its bit-widths to those that annealing machines can deal with. Without adding too many extra spins, we efficiently reduce the coefficient bit-widths of the original Ising model. Furthermore, the ground state before and after reducing the coefficient bit-widths is not much changed in most of the practical cases. Experimental evaluations demonstrate the effectiveness of the proposed method, compared to existing methods.

Non-volatile memories are paid attention to as a promising alternative to memory design. Data stored in them still may be destructed due to crosstalk and radiation. We can restore the data by using error-correcting codes which require extra bits to correct bit errors. Further, non-volatile memories consume ten to hundred times more energy than normal memories in bit-writing. When we configure them using error-correcting codes, it is quite necessary to reduce writing bits. In this paper, we propose a method to generate a bit-write-reducing code with error-correcting ability. We first pick up an error-correcting code which can correct t-bit errors. We cluster its codeswords and generate a cluster graph satisfying the S-bit flip conditions. We assign a data to be written to each cluster. In other words, we generate one-to-many mapping from each data to the codewords in the cluster. We prove that, if the cluster graph is a complete graph, every data in a memory cell can be re-written into another data by flipping at most S bits keeping error-correcting ability to t bits. We further propose an efficient method to cluster error-correcting codewords. Experimental results show that the bit-write-reducing and error-correcting codes generated by our proposed method efficiently reduce energy consumption. This paper proposes the world-first theoretically near-optimal bit-write-reducing code with error-correcting ability based on the efficient coding theories.