Methodologies for more efficient Raman amplification and a more suitable modulation format for 40 Gbit/s WDM unrepeatered transmission are investigated. Management of the fiber effective area is proposed to realize low noise distributed Raman amplification. An Aeff management technique in which low-Aeff fiber is located in a median section instead of the last section, was confirmed numerically and experimentally to improve the OSNR and Q-factor. Carrier-suppressed-return-to-zero (CS-RZ) modulation has the advantage of reducing fiber-nonlinearity effects and permitting denser multiplexing of the wavelengths. 40 Gbit/s 32-channel unrepeatered WDM transmission over 202 km was demonstrated employing the proposed methodologies.

A support system for hepatectomy that allows segmentation of the liver interactively and directly on 3D images was developed. Intuitive 3D images of the liver and its vessels and tumors were drawn with an improved volume-rendering method. Regions supplied with blood by each branch were interactively identified. 3D segments were defined directly on the images using a mouse and excisions were estimated from these interactive inputs.

10G-EPON systems have attracted a great deal of attention as a way of exceeding to realize over 10 Gb/s for optical subscriber networking. Rapid burst-mode transmitting/receiving techniques are the key technologies enabling the burst-mode upstream transmission of 10G-EPON systems. In this paper, we have developed a OLT burst-mode 3R receiver incorporating a burst-mode AGC optical receiver and an 82.5 GS/s over-sampling burst-mode CDR and a ONU burst-mode transmitter with high launch power DFB-LD of 1.27 µm wavelength to fully compliant with IEEE802.3av 10G-EPON PR30 standards. The transmitting characteristics of a fast LD turn-on/off time of less than 6ns and a high launch power of more than +8.0 dBm, and the receiving characteristics of receiver sensitivity of -30.1 dBm and the upstream power budget of 38.1 dB are successfully achieved.

We present an 82.5GS/s over-sampling based burst-mode clock and data recovery (BM-CDR) IC chip-set comprising an 82.5GS/s over-sampling IC using 8×10.3GHz multi-phase clocks and a dual-rate data selector logic IC to realize the 10.3Gb/s and 1.25Gb/s dual-rate burst-mode fast-lock operation required for 10-Gigabit based fiber-to-the-x (FTTx) services supported by 10-Gigabit Ethernet passive optical network (10G-EPON) systems. As the key issue for designing the proposed 82.5GS/s BM-CDR, a fresh study of the optimum number of multi-phase clocks, which is equivalent to the sampling resolution, is undertaken, and details of the 10.3Gb/s cum 1.25/Gb/s dual-rate optimum phase data selection logic based on a blind phase decision algorithm, which can realize a full single-platform dual-rate BM-CDR, ate also presented. By using the power of the proposed 82.5GS/s over-sampling BM-CDR in cooperation with our dual-rate burst-mode optical receiver, we further demonstrated that a short dual-rate and burst-mode preamble of 256ns supporting receiver settling and CDR recovery times was successfully achieved, while obtaining high receiver sensitivities of -31.6dBm at 10.3Gb/s and -34.6dBm at 1.25Gb/s and a high pulse-width distortion tolerance of +/-0.53UI, which are superior to the 10G-EPON standard.

System for the measurement of the respiratory response of human is introduced. This system has the facilities to supply the air which is mixed with CO2 or N2O. The subject inhales the gas of which contents variation can be controlled by the program. The system also measures the respiratory response of the subject which is caused by the changes of atmospheric circumstances, i.e., CO2 inhalation and records data. To check the concentration of agent gas according to the program, micro computer is used. Flow volume of expired gas, heart rate, concentration of supplied gas and that of expired gas are collected. One of the experiments in case of CO2 inhalation is shown. In this experiment the subject inhales the air which is mixed with CO2. Its pertition is 5% of the total volume.