This paper proposes a dual linear-polarized open-ended waveguide subarray designed for use in phased array antennas. The proposed subarray is a one-dimensional linear array that consists of open-ended waveguide antenna elements and suspended stripline feed networks to realize vertical and horizontal polarizations. The antenna includes a novel suspended stripline-to-waveguide transition that combines double- and quad-ridge waveguides to minimize the size of the transition and enhance the port isolation. Metal posts are installed on the waveguide apertures to eliminate scan-blindness. Prototype subarrays are fabricated and tested in an array of 16 subarrays. The experimental tests and numerical simulations indicate that the prototype subarray offers a low reflection coefficient of less than -11.4dB, low cross-polarization of less than -26dB, and antenna efficiency above 69% in the frequency bandwidth of 14%.

In this paper, we propose a novel radial line planar phased array in which helical antenna elements are individually rotated by their respective connected micromotors to realize dynamic beam-scanning. To our knowledge, this is the first radial line planar array (RLPA) that has antenna elements electromechanically rotated by their individual micromotors. To facilitate its fabrication, helix and its probe are directly metallized on a plastic shaft using molded interconnect device technology, and a motor shaft is press-fitted into the plastic shaft. We also present a new design methodology for RLPA, which combines the equivalent circuit theory and electromagnetic simulations of the unit cell element. The proposed procedure is practical to design an RLPA of antenna elements with arbitrary probe shape without large-scale full-wave analysis of the whole structure of the RLPA. We design, fabricate, and evaluate a 7-circle array with 168 helical antenna elements fabricated using molded interconnect device technology. The prototype antenna exhibits dynamic and accurate beam-scanning performance. Furthermore, the prototype antenna exhibits a low reflection coefficient (less than -17dB) and high antenna efficiency (above 77%), which validates the proposed design methodology.

To better understand antenna properties in a narrow space such as in a densely-packed device, a circular microstrip antenna in a narrow parallel-plate waveguide is theoretically studied. An analytical expression is derived for the input impedance in a parallel-plate waveguide by using the cavity model with surface admittance on the side wall. The surface admittance is defined by the external magnetic field due to the equivalent magnetic current at the aperture and takes into account the contribution of the parallel plates to the antenna. The magnetic field external to the antenna, that is in the parallel-plate region, is determined by using a dyadic Green's function. The input impedance is then calculated by a basic definition based on the conservation of the complex power. An analytical expression which couples the resonant frequency and the surface susceptance is also formulated. Presented expressions are validated by comparison with experimental results.