The power consumption of server platforms has been increasing as the amount of hardware resources equipped on them is increased. Especially, the capacity of DRAM continues to grow, and it is not rare that DRAM consumes higher power than processors on modern servers. Therefore, a reduction in the DRAM energy consumption is a critical challenge to reduce the system-level energy consumption. Although it is well known that improving row buffer locality(RBL) and bank-level parallelism (BLP) is effective to reduce the DRAM energy consumption, our preliminary evaluation on a real server demonstrates that RBL is generally low across 15 multithreaded benchmarks. In this paper, we investigate the memory access patterns of these benchmarks using a simulator and observe that cache line-grained channel interleaving schemes, which are widely applied to modern servers including multiple memory channels, hurt the RBL each of the benchmarks potentially possesses. In order to address this problem, we focus on a row-grained channel interleaving scheme and compare it with three cache line-grained schemes. Our evaluation shows that it reduces the DRAM energy consumption by 16.7%, 12.3%, and 5.5% on average (up to 34.7%, 28.2%, and 12.0%) compared to the other schemes, respectively.

Emerging solid state drives (SSDs) based on a next-generation memory technology have been recently released in market. In this work, we call them low-latency SSDs because the device latency of them is an order of magnitude lower than that of conventional NAND flash SSDs. Although low-latency SSDs can drastically reduce an I/O latency perceived by an application, the overhead of OS processing included in the I/O latency has become noticeable because of the very low device latency. Since the OS processing is executed on a CPU core, its operating frequency should be maximized for reducing the OS overhead. However, a higher core frequency causes the higher CPU power consumption during I/O accesses to low-latency SSDs. Therefore, we propose the device utilization-aware DVFS (DU-DVFS) technique that periodically monitors the utilization of a target block device and applies dynamic voltage and frequency scaling (DVFS) to CPU cores executing I/O-intensive processes only when the block device is fully utilized. In this case, DU-DVFS can reduce the CPU power consumption without hurting performance because the delay of OS processing incurred by decreasing the core frequency can be hidden. Our evaluation with 28 I/O-intensive workloads on a real server containing an Intel® Optane™ SSD demonstrates that DU-DVFS reduces the CPU power consumption by 41.4% on average (up to 53.8%) with a negligible performance degradation, compared to a standard DVFS governor on Linux. Moreover, the evaluation with multiprogrammed workloads composed of I/O-intensive and non-I/O-intensive programs shows that DU-DVFS is also effective for them because it can apply DVFS only to CPU cores executing I/O-intensive processes.