We discuss the division of radio resources in the time and frequency domains for wireless local area network (WLAN) devices powered with microwave energy. In general, there are two ways to avoid microwave power transmission (MPT) from influencing data communications: adjacent channel operation of continuous MPT and WLAN data transmission and co-channel operation of intermittent MPT and WLAN data transmission. Experimental results reveal that, even when we implement these methods, several problems arise because WLAN devices have been developed without supposing the existence of MPT. One problem clarified in our experiment is that adjacent channel operation at 2.4GHz does not necessarily perform well owing to the interference from MPT. This interference occurs regardless of the frequency separation at 2.4GHz. The other problem is that intermittent MPT could result in throughput degradation owing to the data rate control algorithm and the association scheme of the WLAN. In addition, the experimental results imply that a microwave energy source and a WLAN device should share information on the timings of intermittent MPT and data transmission to avoid buffer overflow.

In this paper, we study the feasibility of a batteryless wireless sensor supplied with energy by using microwave power transmission (MPT). If we perform co-channel operation of MPT and wireless local area networks (WLANs) for the sake of spectral efficiency, a time division method for MPT and WLAN communications is required to avoid serious interference from MPT to WLAN data transmissions. In addition, to reduce the power consumption of a sensor, the use of power-save operation of the sensor is desirable. We proposed a scheduling scheme that allocates time for MPT and WLAN communications. Specifically, in the proposed scheduling system, an energy source transmits microwave power to a sensor station except when the sensor station transmits data frames or receives beacon frames. In addition, in the proposed scheduling system, we force the remaining energy of the sensor station to converge to a maximum value by adjusting the time interval of data transmission from the sensor station such that the power consumption of the sensor station is reduced. On the basis of the proposition, we implemented a scheduling system and then confirmed that it performed successfully in the conducted experiments. Finally, we discussed the feasibility of the proposed scheduling scheme by evaluating the coverage and then showed that the scheduling scheme can be applied to closed space or room.

Technological developments in wireless communication have led to an increasing demand for radio frequencies. This has necessitated the practice of spectrum sharing to ensure optimal usage of the limited frequencies, provided this does not cause interference. This paper presents a framework for managing an unexpected situation in which a primary user experiences harmful interference with regard to database-driven secondary use of spectrum allocated to the primary user towards 5G mobile networks, where the primary user is assumed to be a radar system. In our proposed framework, the primary user informs a database that they are experiencing harmful interference. Receiving the information, the database updates a primary exclusive region in which secondary users are unable to operate in the licensed spectrum. Subsequent to the update, this primary exclusive region depends on the knowledge about the secondary users when the primary user experiences harmful interference, knowledge of which is stored in the database. We assume a circular primary exclusive region centered at a primary receiver and derive an optimal radius of the primary exclusive region by applying stochastic geometry. Then, for each type of knowledge stored in the database for the secondary user, we evaluate the optimal radius for a target probability that the primary user experiences harmful interference. The results show that the more detailed the knowledge of the secondary user's density and transmission power stored in the database, the smaller the radius that has to be determined for the primary exclusive region after the update and the more efficient the spatial reuse of the licensed spectrum that can be achieved.

This paper proposes a rate adaptation scheme (RAS) for a wireless local area network (WLAN) station powered with microwave power transmission (MPT). A WLAN station attempting to transmit data frames when exposed to microwave radiation for MPT, experiences a reduction in the physical (PHY) layer data rate because frames are lost even when the carrier sense mechanism is used. The key idea of the proposed scheme is to utilize the output of the rectenna used for receiving microwave power. Using rectenna output, a WLAN station based on the proposed scheme assesses whether the station is exposed to microwave radiation for MPT. Then, using historical data corresponding to the assessment result, the station selects an appropriate PHY data rate. The historical data are obtained from previous transmission results, e.g., historical data pertaining to the data frame loss ratio. The proposed scheme was implemented and verified through an experiment. Experimental results showed that the proposed scheme prevents the reduction in the PHY data rate, which is caused by the use of historical data stored in a single memory. Thus, the proposed scheme leads to an improvement in the WLAN throughput.