This paper presents a new asynchronous FIFO design to reduce forward latency in a linear structure. The operation mode for each cell can be reconfigured dynamically as either of the two schemes, wave pipelining or handshaking, according to the data flow in the FIFO. The adoption of wave pipelining to the conventional self-timed FIFO can reduce the overhead of the handshaking as well as latching control in each stage. Initial pre-layout simulations indicate about two times of improvement on latency performance over a state-of-art asynchronous FIFO, while retaining its throughput.

This paper presents a new asynchronous multiplier. The original array structure is divided into two asymmetric arrays, called an upper array and a lower array. For the lower array, Left to Right scheme is applied to take advantage of a fast computation and low power consumption as well. Simulation results show that the proposed multiplier has 40% of performance improvement with a relatively lower power consumption. The multiplier has been implemented in a CMOS 0.35 µm technology and proved functionally correct.

Inter-domain communications on a chip require a synchronizer to resolve the timing problems between an input and a clock of a destination. This paper presents a parallel flop synchronizer and its interface circuit for transferring asynchronous data to the clock domain. The proposed scheme uses a bank of independent two-flops in parallel and supports a two-phase handshake protocol. Compared to the conventional two-flop synchronizer, performance analysis shows that the proposed scheme can reduce latency up to one and a half of clock cycles while retaining its safety to a tolerable level. All designs have been implemented in a 0.25 µm CMOS technology to verify performance analysis of the proposed synchronization.

A mutated adder architecture utilizing a mixture of carry propagation schemes is proposed to design a delay-area efficient adder which were not available in an ordinary design space. Further, we develop an optimization method based on integer linear programming to search the expanded design space of the mutated adder.

This letter presents a synchronizer and its handshake interface for bridging clock domains in SoC. The proposed scheme uses a double two-flop synchronizer operated at different clock edges respectively, based on a two-phase handshake protocol. Performance analysis shows that the proposed design reduces latency up to a clock cycle, while retaining its safety to a tolerable level.

In this paper, we develop asymptotic analysis and simulation models to better understand the characteristics of performance and energy consumption in a multi-core processor design in which dynamic voltage scaling is used. Our asymptotic model is derived using Amdahl's law, Rent's rule and power equations to derive the optimum number of cores and their voltage levels. Our model can predict the possible impact of different multi-core processor configurations on the performance and energy consumption for given workload characteristics (e.g. available parallelism) and process technology parameters (e.g. ratios of dynamic and static energies to total energy). Through the asymptotic analysis and optimization based on the models, we can observe an asymptotic relationship between design parameters such as "the number of cores," "core size" and "voltage scaling strategies" of a multi-core architecture with regards to performance and energy consumption at an initial phase of the design.