A programmable clock generator, based on a phase-locked loop (PLL) circuit, has been developed with 0.5 µm CMOS triple-layer Al interconnection technology for use as an on-chip clock generator in a 300-MHz video signal processor. The PLL-based clock generator generates a clock signal whose frequency ranges from 50 to 350 MHz which is an integral multiple, from 2 to 16, of an external clock frequency. In order to achieve stable operation within this wide range, a voltage controlled oscillator (VCO) with selectable low VCO gain characteristics has been developed. Experimental results show that the clock generator generates a 297-MHz clock with a 27-MHz external clock, with jitter of 180 ps and power dissipation of 120 mW at 3.3-V power supply, and it can also oscillate up to 348 MHz with a 31.7-MHz external clock.

This paper presents a new circuit scheme called a transient sensitive accelerator(TSA) circuit for highly resistive interconnects. The TSA can reduce both delay time and crosstalk voltage. Using the TSA with an interconnect length of 30 mm reduces delay time and crosstalk voltage by 29% and 20%, respectively, A further advantage is that the TSA operates in self-time and thus can be applied to bidirectional signal communication.