1-3hit |
Fretting motion in static contacs of mated metals can lead to a remarkable increase of their contact resistance. When such fretted contacts are in the state of being totally cut off from any electric source, a millivolt-order contact voltage is often induced in them. An outline of such voltage generation was reported in the former letter. In this phenomenon, the most interesting fact is that the emerging voltage has a particular polarity, when dissimilar metals are meted as contacts. This letter deals with continued experimental studies concerning such contacts of mated dissimilar metals and physical discussions on the emerging voltage with a particular polarity.
Zul Atfyi Fauzan Mohammed NAPIAH Ryoichi GYOBU Takuya HISHIKI Takeo MARUYAMA Koichi IIYAMA
nMOS-type and pMOS-type silicon avalanche photodiodes (APDs) were fabricated by standard 0.18µm CMOS process, and the current-voltage characteristic and the frequency response of the APDs with and without guard ring structure were measured. The role of the guard ring is cancellation of photo-generated carriers in a deep layer and a substrate. The bandwidth of the APD is enhanced with the guard ring structure at a sacrifice of the responsivity. Based on comparison of nMOS-type and pMOS-type APDs, the nMOS-type APD is more suitable for high-speed operation. The bandwidth is enhanced with decreasing the spacing of interdigital electrodes due to decreased carrier transit time and with decreasing the detection area and the PAD size for RF probing due to decreased device capacitance. The maximum bandwidth was achieved with the avalanche gain of about 10. Finally, we fabricated a nMOS-type APD with the electrode spacing of 0.84µm, the detection area of 10×10µm2, the PAD size for RF probing of 30×30µm2, and with the guard ring structure. The maximum bandwidth of 8.4GHz was achieved along with the gain-bandwidth product of 280GHz.
Koichi IIYAMA Takeo MARUYAMA Ryoichi GYOBU Takuya HISHIKI Toshiyuki SHIMOTORI
Quadrant silicon avalanche photodiodes (APDs) were fabricated by standard 0.18µm CMOS process, and were characterized at 405nm wavelength for Blu-ray applications. The size of each APD element is 50×50µm2. The dark current was 10pA at low bias voltage, and low crosstalk of about -80dB between adjacent APD elements was achieved. Although the responsivity is less than 0.1A/W at low bias voltage, the responsivity is enhanced to more than 1A/W at less than 10V bias voltage due to avalanche amplification. The wide bandwidth of 1.5GHz was achieved with the responsivity of more than 1A/W, which is limited by the capacitance of the APD. We believe that the fabricated quadrant APD is a promising photodiode for multi-layer Blu-ray system.