This paper proposes a new antenna array design of Massive MIMO for capacity enhancement in line of sight (LOS) environments. Massive MIMO has two key problems: the heavy overhead of feeding back the channel state information (CSI) for very large number of transmission and reception antenna element pairs and the huge computation complexity imposed by the very large scale matrixes. We have already proposed a practical application of Massive MIMO, that is, Massive Antenna Systems for Wireless Entrance links (MAS-WE), which can clearly solve the two key problems of Massive MIMO. However, the conventional antenna array arrangements; e.g. uniform planar array (UPA) or uniform circular array (UCA) degrade the system capacity of MAS-WE due to the channel spatial correlation created by the inter-element spacing. When the LOS component dominates the propagation channel, the antenna array can be designed to minimize the inter-user channel correlation. We propose an antenna array arrangement to control the grating-lobe positions and achieve very low channel spatial correlation. Simulation results show that the proposed arrangement can reduce the spatial correlation at CDF=50% value by 80% compared to UCA and 75% compared to UPA.

This paper proposes a null-space expansion scheme for multiuser massive MIMO transmission in order to suppress inter-user interference (IUI) triggered by the temporal variation of the channel. The downlink multiuser MIMO channel capacity of time varying channels is severely degraded since IUI must be suppressed at the transmitter side by using past estimated channel state information at the transmitter side (CSIT). Massive MIMO has emerged as one of the most promising technologies for further capacity enhancement by increasing the number of base station (BS) antenna elements. Exploiting the excess degrees of freedom (DoFs) inherent in massive MIMO, a BS with the proposed IUI suppression scheme performs multiple null-steering for each UE (User Equipment) antenna element, which expands the null-space dimension. Computer simulations show that the proposed scheme has superior IUI suppression performance to the existing channel prediction scheme in time varying channels.

High gain antennas with narrow-beamforming are required to compensate for the high propagation loss expected in high frequency bands such as the millimeter wave and sub-terahertz wave bands, which are promising for achieving extremely high speeds and capacity. However using narrow-beamforming for initial access (IA) beam search in all directions incurs an excessive overhead. Using wide-beamforming can reduce the overhead for IA but it also shrinks the coverage area due to the lower beamforming gain. Here, it is assumed that there are some situations in which the required coverage distance differs depending on the direction from the antenna. For example, the distance to an floor for a ceiling-mounted antenna varies depending on the direction, and the distance to the obstruction becomes the required coverage distance for an antenna installation design that assumes line-of-sight. In this paper, we propose a novel IA beam search scheme with adaptive beam width control based on the distance to shield obstacles in each direction. Simulations and experiments show that the proposed method reduces the overhead by 20%-50% without shrinking the coverage area in shield environments compared to exhaustive beam search with narrow-beamforming.

High-frequency wireless communication is drawing attention because of its potential to actualize huge transmission capacity in the next generation wireless system. The use of high-frequency bands requires dense deployment of access points to compensate for significant distance attenuation and diffraction loss. Dense deployment of access points in a mobility environment triggers an increase in the frequency of handover because the number of candidate access points increases. Therefore, simple handover schemes are needed. High-frequency wireless systems enable station position to be determined using their wideband and highly directional communication signals. Thus, simple handover based on position information estimated using the communication signal is possible. Interruptions caused by handover are also a huge barrier to actualizing stable high-frequency wireless communications. This paper proposes a seamless handover scheme using multiple radio units. This paper evaluates the combination of simple handover and the proposed scheme based on experiments using a formula racing car representing the fastest high-speed mobility environment. Experimental results show that seamless handover and high-speed wireless transmission over 200Mbps are achieved over a 400-m area even at station velocities of greater than 200km/h.

This paper presents experimental results of our proposed null-space expansion scheme for multiuser massive multiple-input multiple-output (MIMO) in time varying channels. Multiuser MIMO transmission with the proposed scheme can suppress the inter-user interference (IUI) caused by outdated channel state information (CSI). The excess degrees of freedom (DoFs) of massive MIMO is exploited to perform additional null-steering using past estimated CSI. The signal-to-interference power ratio (SIR) and spectral efficiency performances achieved by the proposed scheme that uses measured CSI is experimentally evaluated. It is confirmed that the proposed scheme shows performance superior to the conventional channel prediction scheme. In addition, IUI can be stably suppressed even in high mobility environments by further increasing the null-space dimension.

Radio on fiber (RoF) – distributed antenna system (DAS) over wavelength division multiplexing – passive optical network (WDM-PON) with multiple – input multiple – output (MIMO) has been proposed as a next generation radio access network (RAN). The system employs optical time division multiplexing (OTDM) over one WDM channel as a backhaul for RAN to flexibly transmit various types of radio air interfaces. To cover a wider wireless service area, the WDM-PON has a combination of double and bus topologies. This paper analyses the channel capacity in the MIMO cell provided by the RoF-DAS over WDM-PON with computer simulation considering noise power added in the RoF link, and discusses the trade-off between losses in RoF and wireless channel appeared in the channel capacity. Then, this paper clarifies a method to derive the optimal cell size to obtain the highest channel capacity.