1-3hit |
Abdullah AL AMIN Kenji SAKURAI Tomonari SHIODA Masakazu SUGIYAMA Yoshiaki NAKANO
An 8ch, 400 GHz monolithically integrated WDM channel selector featuring an array of quantum well semiconductor optical amplifiers (SOA) and arrayed waveguidegrating demultiplexer is presented. Reduction of fabrication complexity was achieved by using a single step selective area MOVPE to realize the different bandgap profiles for the SOA array and passive region. The selective growth mask dimensions were optimized by simulation. Dry-etching with short bending radii of 200 µm resulted in compact device size of 7 mm2.5 mm. Static channel selection with high ON-OFF ratio of >40 dB was achieved.
Hideo ARIMOTO Jun-ichiro SHIMIZU Takeshi KITATANI Kazunori SHINODA Tomonobu TSUCHIYA Masataka SHIRAI Masahiro AOKI Noriko SASADA Hiroshi YAMAMOTO Kazuhiko NAOE Mitsuo AKASHI
This paper describes 40-Gbit/s operation of 1.55-µm electro-absorption (EA) modulators applicable to compact and low-cost transmitters for very-short-reach (VSR) applications. We start by identifying factors that make a multi-quantum-well (MQW) design suitable for high levels of output power and for uncooled operation. From the basic experimental results, we determine that a valence-band discontinuity ΔEv at around 80 meV is optimal in terms of combining high-output-power operation and a good extinction ratio. We then apply the above findings in an InGaAsP-MQW EA modulator that is monolithically integrated with a distributed feedback (DFB) laser, and thus obtain operation with high output power (+1.2 dBm), a high ER (10.5 dB), and a low power penalty (0.4 dB after transmission over 2.6 km of single-mode-fiber). These results confirm the applicability of our EA modulator/DFB laser to VSR applications. After that, we theoretically demonstrate the superiority in terms of ER characteristics of the InGaAlAs-MQW over the conventional InGaAsP-MQW. InGaAlAs-MQW EA modulators are fabricated and demonstrate, for the first time, 40-Gbit/s operation over a wide temperature range (0 to 85).
Preliminary experiments on non-destructive quantitative analysis of water vapor density in halogen lamps have been carried out. A working curve showing a relation between absorbance and water vapor density was successfully obtained by using frequency-stabilized InGaAsP/InP semiconductor laser spectrometric system.