An integrated power and rate control algorithm is proposed to satisfy the requirements of both user's data rate and signal quality. This algorithm lets only one representative user in each cell participate in the distributed power control and assigns the power levels to other users according to some constant power ratios. In addition to reducing the computational complexity, the proposed algorithm also gains larger throughput for the same number of iterations and finds a feasible power set faster than the other algorithm does.

Multiple-input multiple-output (MIMO) maximum-SNR (max-SNR) system employs the maximum ratio combiner (MRC) at the receiver side and the maximum ratio transmitter (MRT) at the transmitter side. Its performances highly depend on MIMO channel characteristics, which vary according to both the number of antennas and their distribution between the transmitter and receiver sides. By using the decomposition of the ordered Wishart distribution in the uncorrelated Rayleigh case, we derived a closed-form expression of the largest eigenvalue probability density function (PDF). The final result yields to an expression form of the PDF where polynomials are multiplied by exponentials; it is worth underlining that, though this form had been previously observed for given couples of antennas, to date no formally-written closed-form was available in the literature for an arbitrary couple. Then, this new expression permits one to quickly and easily get the well known largest eigenvalue PDF and use it to determine the binary error probability (BEP) of the max-SNR.

A distributed algorithm that uses the MVDR (minimum variance distortionless response) combiner and the local information to adjust the power and weight (combining weight) is proposed for joint diversity and power control in wireless networks. The proposed algorithm limits the power according to a constraint and has the property that if the SINR (signal to interference and noise ratio) requirement is achieved, then the condition of this achievement will hold after every discrete time. We prove that the power and weight of the proposed algorithm converge to the optimal feasible power and weight that minimize the total power consumption. Simulation results also show that the MVDR combiner gets lower average power level per user and higher probability of success in meeting the SINR requirement than other combiners.

A solution to the problem of improving robustness to noise in automatic speech recognition is presented in the framework of multi-band, multi-SNR, and multi-path approaches. In our word recognizer, the whole frequency band is divided into seven-overlapped sub-bands, and then sub-band noisy phoneme HMMs are trained on speech data mixed with the filtered white Gaussian noise at multiple SNRs. The acoustic model of a word is built as a set of concatenations of clean and noisy sub-band phoneme HMMs arranged in parallel. A Viterbi decoder allows a search path to transit to another SNR condition at a phoneme boundary. The recognition scores of the sub-bands are then recombined to give the score for a word. Experiments show that the overlapped seven-band system yields the best performance under nonstationary ambient noises. It is also shown that the use of filtered white Gaussian noise is advantageous for training noisy phoneme HMMs.

In this letter, we propose effective feature vectors to improve the performance of voice activity detection (VAD) employing a support vector machine (SVM), which is known to incorporate an optimized nonlinear decision over two different classes. To extract the effective feature vectors, we present a novel scheme that combines the a posteriori SNR, a priori SNR, and predicted SNR, widely adopted in conventional statistical model-based VAD.

A novel Uniform Discrete Multitone (DMT) transceiver is proposed, utilizing a wavelet packet based filter bank transmultiplexer in conjunction with a DMT transceiver. The proposed transceiver decomposes the channel spectrum into subbands of equal bandwidth. The objective is to minimize the bit error rate (BER), which is increased by channel-noise amplification. This noise amplification is due to the Zero-Forcing equalization (ZFE) technique. Quantization of the channel-noise amplification is presented, based on post-equalization signal-to-noise ratio (SNR) and probability of error in all subbands of the Uniform DMT system. A modified power loading algorithm is applied to allocate variable power according to subband gains. A BER performance comparison of the Uniform DMT with variable and uniform power-loading and with a conventional DMT system in a Digital Subscriber Line (DSL) channel is presented.

A wideband NRD guide and rectangular waveguide H-plane transition is proposed to transfer millimeter waves from a dielectric strip to the outer conductor surface of NRD guide through a short length of waveguide made through the conductor plate. As a result, it has a bandwidth about 6.7 GHz of |S11| -15 dB and a low transition loss about 0.35 dB at 60 GHz band.

Owing to simple structure, low cost and high performance, NRD-guide millimeter wave circuits have attracted much attention in recent years. In this paper, a variety of NRD-guide passive components are reviewed with emphasis on design techniques and performance estimation in the 60 GHz frequency band where the license-free advantage is available. The passive components to be discussed here include compact bends, wideband hybrid couplers, practical three-port junctions, versatile E-plane filters, and effective feeding structures for lens antennas. Some of them are employed to construct millimeter wave transceivers. Eye patterns observed at 1.5 Gbps confirm the potential ability of the fabricated NRD-guide transceivers for high bit-rate, wireless applications.

A parametric linear filter for a linear observation model usually requires a parameter selection process so that the filter achieves a better filtering performance. Generally, criteria for the parameter selection need not only the filtered solution but also the filter itself with each candidate of the parameter. Obtaining the filter usually costs a large amount of calculations. Thus, an efficient algorithm for the parameter selection is required. In this paper, we propose a fast parameter selection algorithm for linear parametric filters that utilizes a joint diagonalization of two non-negative definite Hermitian matrices.

This paper proposes pilot-based channel quality reporting for orthogonal frequency division multiple access/time division duplex (OFDMA/TDD) systems with cochannel interference. In the proposed method, a terminal reports his channel quality in multiple subbands to base station (BS) using channel reciprocity of TDD systems. The terminal transmits uplink pilot signals in the subbands with different transmit power which is inversely proportional to the subband-based interference power. The BS can obtain knowledge of the terminal's received signal-to-interference-plus-noise power ratio on subband basis, measuring the pilot signal power. In performance evaluation, accuracy of channel quality reporting and amount of uplink signalling are examined. From numerical results, it is found that the proposed method becomes effective as the number of subbands and terminals for channel quality reporting increases.

Transmission characteristics of a left-handed (LH) ferrite microstrip line are significantly affected by the nonuniform DC bias magnetic field in the ferrite substrate (internal magnetic field Hin) caused by the inhomogeneous demagnetizing effect because the strip conductors of these devices must be mounted at the edge of the ferrite substrate. Three dimensional analyses on the LH ferrite microstrip line are performed taking into account the nonuniform internal magnetic field Hin. The analytical results show that the nonuniform internal magnetic field under the strip conductor near the edge of the ferrite substrate is useful for spreading the frequency band of negative permeability and nonreciprocal operation, and for improvement of both the insertion and return losses of the LH ferrite microstrip line. Measured results of more than 20 dB isolation with 2.2 dB insertion loss and 1.33 GHz bandwidth are corresponding well to the analytical results.

A rectangular waveguide compatible NRD guide E-plane bandpass filter is proposed for 55 GHz band OFDM applications. The NRD guide E-plane bandpass filter is constructed by inserting a metal foil array in the E-plane of NRD guide. Simulation, fabrication, and handling of the filter are not difficult because each resonator is constructed by a couple of metal foils of a simple shape. A Chebyshev response 5-pole bandpass filter with a very narrow bandwidth of 550 MHz is designed and fabricated at 55 GHz band. Simulated and measured filter performances agree well with the design specifications. Insertion loss of the fabricated filter is found to be around 2.0 dB. Although temperature stability of the fabricated filter are found to be within manageable level, the adoption of cyclo olefin polymer can be one of solution for the temperature stability improvement.

This paper presents a novel approach to single channel speech enhancement in noisy environments. Widely adopted noise reduction techniques based on the spectral subtraction are generally expressed as a spectral gain depending on the signal-to-noise ratio (SNR) [1]-[4]. As the estimation method of the SNR, the well-known decision-directed (DD) estimator of Ephraim and Malah efficiently is known to reduces musical noise in noise frames, but the a priori SNR, which is a crucial parameter of the spectral gain, follows the a posteriori SNR with a delay of one frame in speech frames [5]. Therefore, the noise suppression gain using the delayed a priori SNR, which is estimated by the DD algorithm matches the previous frame rather than the current one, so after noise suppression, this degrades the performance of a noise reduction during abrupt transient parts. To overcome this artifact, we propose a computationally simple but effective speech enhancement technique based on the sigmoid type function to adaptively determine the weighting factor of the DD algorithm. Actually, the proposed approach avoids the delay problem of the a priori SNR while maintaining the advantage of the DD algorithm. The performance of the proposed enhancement algorithm is evaluated by the objective and subjective test under various environments and yields better results compared with the conventional DD scheme based approach.

Existing methods for inverse motion compensation (IMC) in the DCT domain have not considered the unrestricted motion vector (UMV). In the existing methods, IMC is performed to deal with the UMV in the spatial domain after the inverse DCT (IDCT). We propose an IMC method which can deal with the UMV directly in the DCT domain without the use of the IDCT/DCT required by the existing methods. The computational complexity of the proposed method can be reduced by about half of that of the brute-force method operating in the spatial domain. Experimental results show that the proposed method can efficiently reduce the processing time with similar visual quality.

Electromechanical switching devices such as relays may be surprisingly forgiving to occasional, but temporary, electrical stress beyond specification. Consequently delayed openings due to welded contacts on the order of milliseconds usually have been unnoticed and hence have not been reason for concern. However, as electrical systems of vehicles are getting "smarter" and more and more diagnostic routines are being implemented, even such short delay times may be translated as errors. Pre-conditioning contact surfaces has been explored as a measure to increase the welding resistance and eliminate contact opening delays. The 20-A-class relay investigated has been optimized to break occasional current peaks up to 80 ADC.

An improved Max-Log-Map (MLM) turbo equalization algorithm called Scaled Max-Log-Map (SMLM) iterative equalization is presented. Simulations show that the scheme can dramatically outperform the MLM besides it is insensitive to SNR mismatch. Unfortunately, its performance is still much worse than that of Log-Map (LM) with exact SNR over high-loss channels. Accordingly, we also propose a new SNR estimation algorithm based on the reliability values of soft output extrinsic information of SMLM decoder. Using the new scheme, we obtain good performance close to that of LM with ideal knowledge of SNR.

We propose and experimentally demonstrate a simple method for monitoring optical signal-to-noise ratio. The novel method can be used in the optical transport networks using optical cross-connects or reconfigurable optical add-drop multiplexers. OSNR is measured by monitoring the transmitted optical power and the reflected optical power from fiber Bragg grating. We have obtained OSNR with an error less than 0.8 dB.

A novel structure of bandpass filter using NRD guide E-plane resonators is proposed. The NRD guide E-plane resonator is constructed by inserting metal foils in the E-plane of NRD guide. Simulation, fabrication and handling of the filter are very easy because each resonator is separated by simple metal foils. Chebyshev response bandpass filters are designed based on the theory of direct-coupled resonator filters and fabricated at 60 GHz. Simulated and measured filter performances agreed well with the design specifications. Insertion losses of the fabricated filters were found to be around 0.3 dB for 3-pole filter and 0.5 dB for 5-pole bandpass filter, respectively.

In this paper, a coefficient-parameter embedding method into Motion-JPEG2000 (MJP2) is proposed for invertible deinterlacing with variable coefficients. Invertible deinterlacing, which the authors have developed before, can be used as a preprocess of frame-based motion picture codec, such as MJP2, for interlaced videos. When the conventional field-interleaving is used instead, comb-tooth artifacts appear around edges of moving objects. On the other hand, the invertible deinterlacing technique allows us to suppress the comb-tooth artifacts and also guaranties recovery of original pictures. As previous works, the authors have developed a variable coefficient scheme with a motion detector, which realizes adaptability to local characteristics of given pictures. However, when this deinterlacing technique is applied to a video codec, coefficient parameters have to be sent to receivers for original picture recovery. This paper proposes a parameter-embedding technique in MJP2 and constructs a standard stream which consists both of picture data and the parameters. The parameters are embedded into the LH1 component of wavelet transform domain through the ROI (region of interest) function of JPEG2000 without significant loss in the performance of comb-tooth suppression. Some experimental results show the feasibility of our proposed scheme.

In this paper, we first briefly discuss the newly emerging Secured JPEG (JPSEC) standard for security services for JPEG 2000 compressed images. We then propose our novel approach for applying authentication to JPEG 2000 images in a scalable manner. Our authentication technique can be used for source authentication, nonrepudiation and integrity verification for the received possibly transcoded JPEG 2000 images in such a way that it is possible to authenticate different resolutions or different qualities extracted or received from a JPEG 2000 encoded image. Three different implementation methods for our authentication technique are presented. Packet-Based Authentication involves using the MD5 hashing algorithm for calculating the hash value for each individual packet in the JPEG 2000 codestream. Hash values are truncated to a specified length to reduce the overhead in storage space, concatenated into a single string, and then signed using the RSA algorithm and the author's private key for repudiation prevention. Resolution-Based Authentication and Quality-Based Authentication methods involve generating a single hash value from all contiguous packets from each entire resolution or each entire quality layer, respectively. Our algorithms maintain most of the inherent flexibility and scalability of JPEG 2000 compressed images. The resultant secured codestream is still JPEG 2000 compliant and compatible with JPEG 2000 compliant decoders. Also, our algorithms are compatible with the Public Key Infrastructure (PKI) for preventing signing repudiation from the sender and are implemented using the new JPSEC standard for security signaling.