Orthogonal frequency and code division multiplexing (OFCDM) is available as orthogonal frequency and code division multiple access (OFCDMA) by allocating subcarrier to users. OFCDMA is an efficient transmission method assigning the subcarrier and the channel code according to channel state or many different environments. However, OFCDMA is hard to apply many frequency spreading codes when it is compared with OFCDM because of the restrictive subcarriers. This problem leads to decrease the frequency diversity. Therefore we propose system that combines cyclic delay diversity (CDD) with cooperative relaying system based on OFCDMA. This system complements this restrict by spatial diversity. In addition to that, the proposed system obtains diversity gain without loss of the throughput when direct-path condition is not good.

In this letter, a low complexity transmitter is proposed for the downlinks of orthogonal frequency code division multiplexing (OFCDM) systems. The principle is based on a joint time-frequency spreading and inverse fast Fourier transform (TFS-IFFT), which combines the frequency spreading with partial stages of IFFT, so as to simplify the real-time processing. Compared with the conventional one, the proposed OFCDM transmitter is of lower real-time computational complexity, especially for those with large spreading factor or low modulation level. Furthermore, the proposed TFS-IFFT can also be applied to other frequency spreading systems, such as MC-CDMA, for complexity reduction.

In this paper, we propose a novel peak-to-average power ratio (PAPR) reduction method for multi-rate orthogonal frequency division multiplexing (OFCDM) based on an orthogonal variable spreading factor (OVSF) code. In the method, the base station assigns two signs of code sequence to each user to maintain the orthogonality among the code sequences that have different lengths. After that, one sign of the code sequence is selected for reducing the PAPR of the OFCDM symbol. Based on theoretical analysis and computer simulation, we show that the proposed method reduces the PAPR for two data rate classes.

Recently, the direct conversion scheme has been actively investigated for the purpose of cost miniaturization and low power consumption of wireless receivers. IQ imbalance is one of the problems for the direct conversion receiver. In the case of OFCDM modulations, this IQ imbalance causes intercarrier interference (ICI) in the demodulated signals. In this paper, the decision directed scheme for IQ imbalance compensation is proposed. In the proposed scheme, the combination of received symbols which satisfies orthogonality conditions is used for compensation of IQ imbalance. Therefore, in addition to the pilot symbols, the received symbols can be used in order to improve the accuracy of the compensation matrix and BER can be reduced.

This paper proposes an accurate Fast Fourier Transform (FFT) window timing detection method based on the maximum signal-to-interference power ratio (SIR) criterion taking into account the received signal and inter-symbol interference power according to different detected FFT window timings in Orthogonal Frequency and Code Division Multiplexing (OFCDM) wireless access. In the proposed method, the SIR of the received signal is estimated using the desired signal power and inter-symbol interference power calculated based on the power delay profile, which is measured by the cross-correlation between the pilot symbol replica and the received signal. Furthermore, since the SIR is calculated only for the received path timing of the first path and those paths exceeding the guard interval duration, the computational complexity of the proposed method is low. Computer simulation results show that the proposed scheme reduces the required average received signal energy per symbol-to-noise power spectrum density ratio (Es/N0) for achieving the average packet error rate of 10-2 by approximately 1.0 dB compared to the conventional method, which detects the forward path timing of the power delay profile (16QAM data modulation, six-path Rayleigh fading channel, and the maximum delay time of 3 µsec (root mean squared (r.m.s.) delay spread of 0.86 µsec)).

This paper presents throughput performance along with power profiles in the time and frequency domains over 100 Mbps based on field experiments using the implemented Variable Spreading Factor-Orthogonal Frequency and Code Division Multiplexing (VSF-OFCDM) transceiver with a 100-MHz bandwidth in a real multipath fading channel. We conducted field experiments in which a base station (BS) employs a 120-degree sectored beam antenna with the antenna height of 50 m and a van equipped with a mobile station (MS) is driven at the average speed of 30 km/h along measurement courses that are approximately 800 to 1000 m away from the BS, where most of the locations along the courses are under non-line-of-sight conditions. Field experimental results show that, by applying 16QAM data modulation and Turbo coding with the coding rate of R = 1/2 to a shared data channel together with two-branch antenna diversity reception, throughput over 100 and 200 Mbps is achieved when the average received signal-to-interference plus noise power ratio (SINR) is approximately 6.0 and 14.0 dB, respectively in a broadband channel bandwidth where a large number of paths such as more than 20 are observed. Furthermore, the location probability for achieving throughput over 100 and 200 Mbps becomes approximately 90 and 20% in these measurement courses, which experience a large number of paths, when the transmission power of the BS is 10 W with a 120-degree sectored beam transmission.

This paper proposes the optimum design for adaptively controlling the spreading factor in Orthogonal Frequency and Code Division Multiplexing (OFCDM) with two-dimensional spreading according to the cell configuration, channel load, and propagation channel conditions, assuming the adaptive modulation and channel coding (AMC) scheme employing QPSK and 16QAM data modulation. Furthermore, we propose a two-dimensional orthogonal channelization code assignment scheme to achieve skillfully orthogonal multiplexing of multiple physical channels. We first demonstrate the reduction effect of inter-code interference by the proposed two-dimensional orthogonal channelization code assignment. Then, computer simulation results show that in time domain spreading, the optimum spreading factor, except for an extremely high mobility case such as for the fading maximum Doppler frequency of fD = 1500 Hz, becomes SFTime = 16. Furthermore, it should be decreased to SFTime = 8 for such a very fast fading environment using 16QAM data modulation. We also clarify when the channel load is light such as Cmux/SF = 0.25 (Cmux and SF denote the number of multiplexed codes and total spreading factor, respectively), the required average received signal energy per symbol-to-noise power spectrum density ratio (Es/N0) is reduced as the spreading factor in the frequency domain is increased up to say SFFreq = 32 for QPSK and 16QAM data modulation. When the channel load is close to full such as when Cmux/SF = 0.94, the optimum spreading factor in the frequency domain is SFFreq = 1 for 16QAM data modulation and SFFreq = 1 to 8 for QPSK data modulation according to the delay spread. Consequently, by setting several combinations of spreading factors in the time and frequency domains, the near maximum link capacity is achieved both in cellular and hotspot cell configurations assuming various channel conditions.

This paper compares the throughput performance employing hybrid automatic repeat request (ARQ) packet combining, i.e., Chase combining, and Incremental redundancy, considering the frequency diversity effect in the broadband forward-link channel for Orthogonal Frequency and Code Division Multiplexing (OFCDM) packet wireless access achieving a peak throughput above 100 Mbps. Simulation results show that the achievable throughput at the average received signal energy per symbol-to-background noise power spectrum density ratio (Es/N0) of 0 and 6 dB employing Incremental redundancy is increased by approximately 35 and 30% compared to that using Chase combining for QPSK and 16QAM data modulation schemes with the coding rate of R = 1/2, respectively, considering a large frequency diversity effect in a 12-path exponential decayed Rayleigh fading channel, since the reduced variations in the received signal level in a broadband channel bring about a larger coding gain in Incremental redundancy. We also show that when adaptive modulation and channel coding (AMC) is applied, Incremental redundancy is superior to Chase combining since the large coding gain is effective in achieving a large time diversity gain for a low number of retransmissions such as M = 1 or 2 for a maximum Doppler frequency up to fD = 400 Hz. It is demonstrated, nevertheless, that the total throughput when employing Incremental redundancy associated with a near optimum MCS set according to the channel conditions becomes almost identical to that using Chase combining when a large number of retransmissions, M, is allowed, such as M = 10, owing to time diversity along with frequency diversity.

This paper proposes a new cell-specific scrambling code (CSSC) assignment method and a fast cell search algorithm in the forward link for Orthogonal Frequency and Code Division Multiplexing (OFCDM) wireless access that are suitable for a system incorporating coexisting isolated and cellular cells. In the proposed method, one or some CSSC groups and thereby the CSSCs belonging to the CSSC groups are exclusively assigned to isolated cells. By detecting the best CSSC assigned to an isolated cell with higher priority than the cellular cells, the best cell including the isolated cell obtaining the minimum path loss can be detected far faster than by using the conventional cell search method, which employs uniform CSSC assignment. Computer simulation results show that by using the proposed cell search method together with the exclusive CSSC assignment to the isolated cells, the isolated-cell detection probability of approximately 90% is achieved at the cell boundary after the cell search time of 10 msec, while corresponding detection probability using conventional CSSC assignment is approximately 80% without notifying the user equipment of the cell type and its CSSC information of the surrounding cells via the broadcast channel, at the average received signal energy per bit-to-noise power spectrum density ratio (Eb/N0) of 10 dB for the common pilot channel (CPICH) in the cellular cells, when the transmission power ratio of the CPICH to the packet data channel (PDCH) for a one-code channel is RCPICH = 9 dB in a 20-cell layout model.

This paper proposes cell selection (CS) based on shadowing variation for the forward-link Orthogonal Frequency and Code Division Multiplexing (OFCDM) packet wireless access. We clarify its effects using a broadband propagation channel model in a comparison with fast cell selection (FCS), which tracks the instantaneous fading variation, and with the conventional slow CS, which tracks only the distance-dependent path loss, based on radio link level simulations that take into account time-varying instantaneous fading and shadowing variations. The simulation results show that the achievable throughput with FCS improves slightly in a broadband channel with an increasing number of paths when the average path-loss difference between two cells is greater than 2 dB. Nevertheless, we show that the optimum CS interval becomes approximately 100 msec, because the interval can track the time-varying shadowing variation considering low-to-high mobility up to the maximum Doppler frequency of 200 Hz. Consequently, we show that the throughput by employing the CS based on shadowing variation with the selection interval of 100 msec is increased by approximately 5 and 15% compared to that using the conventional slow CS with the selection interval of 1 sec, for the maximum Doppler frequency of 20 and 200 Hz, respectively.

This paper proposes likelihood function generation of complexity-reduced Maximum Likelihood Detection with QR Decomposition and M-algorithm (QRM-MLD) suitable for soft-decision Turbo decoding and investigates the throughput performance using QRM-MLD with the proposed likelihood function in multipath Rayleigh fading channels for Orthogonal Frequency and Code Division Multiplexing (OFCDM) multiple-input multiple-output (MIMO) multiplexing. Simulation results show that by using the proposed likelihood function generation scheme for soft-decision Turbo decoding following QRM-MLD in 4-by-4 MIMO multiplexing, the required average received signal energy per bit-to-noise power spectrum density ratio (Eb/N0) at the average block error rate (BLER) of 10-2 at a 1-Gbps data rate is significantly reduced compared to that using hard-decision decoding in OFCDM access with 16 QAM modulation, the coding rate of 8/9, and 8-code multiplexing with a spreading factor of 8 assuming a 100-MHz bandwidth. Furthermore, we show that by employing QRM-MLD associated with soft-decision Turbo decoding for 4-by-4 MIMO multiplexing, the throughput values of 500 Mbps and 1 Gbps are achieved at the average received Eb/N0 of approximately 4.5 and 9.3 dB by QPSK with the coding rate of R = 8/9 and 16QAM with R = 8/9, respectively, for OFCDM access assuming a 100-MHz bandwidth in a twelve-path Rayleigh fading channel.

This paper proposes a unified packet scheduling method that considers the delay requirement of each traffic data packet whether real time (RT) or non-real time (NRT), the channel conditions of each accessing user, and the packet type in hybrid automatic repeat request (ARQ), i.e., either initially transmitted packet or retransmitted packet, in the forward link for Orthogonal Frequency and Code Division Multiplexing (OFCDM) wireless access. In the proposed packet scheduling method, the overall priority function is decided based on PTotal = αDelayPDelay + αTypePType + αSINRPSINR (PDelay, PType, and PSINR are the priority functions derived from the delay requirement, type of packet, and the received signal-to-interference plus noise power ratio (SINR), respectively, and αDelay, αType, and αSINR are the corresponding weighting factors). The computer simulation results show that the weighting factor of each priority function as αType/αDelay = 0.6, αSINR/αDelay = 0.4 assuming the linear-type function in PDelay and a constant-type function in PType is optimized. Furthermore, we show that the outage probability for achieving the packet loss rate (PLR) of less than 10-3 for non-real time (NRT) traffic users employing the proposed packet scheduling method is reduced by approximately two orders of magnitude compared to that using the Priority Queuing (PQ) method while maintaining the PLR of real-time (RT) traffic users at the same level as that using the PQ method.

In this letter, we address the performance evaluation of a space-time block coded (STBC) orthogonal frequency and code division multiplexing (OFCDM) system encountered with time-variant channels. For the performance evaluation, the average bit error rate (BER) impairment due to imperfect channel information is investigated taking into account the effect of time-varying channels. Derived results show that the loss of orthogonality due to the time variation of the channel incurs the channel estimation error, which causes performance degradation.

This letter addresses the performance degradation due to carrier frequency offset in an orthogonal frequency and code division multiplexing (OFCDM) systems with multiple transmit antennas. For the performance evaluation, the average bit error rate (BER) expression is derived taking account of the effect of a carrier frequency offset. Derived results show that the BER performance of the space-time coded OFCDM system is less sensitive to a frequency offset, compared to the normal OFCDM system.

This paper presents a performance comparison of the channel-interleaving method in the frequency domain, i.e., bit interleaving after channel encoding, symbol interleaving after data modulation, and chip interleaving after spreading, for Variable Spreading Factor-Orthogonal Frequency and Code Division Multiplexing (VSF-OFCDM) wireless access with frequency domain spreading, in order to reduce the required average received signal energy per symbol-to-background noise power spectrum density ratio (Es/N0) and achieve the maximum radio link capacity. Simulation results show that, for QPSK data modulation employing turbo coding with the channel coding rate R=3/4, the chip-interleaving method decreases the required average received Es/N0 the most for various radio parameters and propagation model conditions, where the number of code-multiplexing, Cmux, the spreading factor, SF, the r.m.s. delay spread, σ, the number of multipaths, L, and the maximum Doppler frequency, fD, are varied as parameters. For example, when Cmux=12 of SF=16, the improvement in the required average received Es/N0 from the case without interleaving at the average packet error rate (PER) of 10-2, is approximately 0.3, 0.3, and 1.4 dB for the bit, symbol, and chip interleaving, respectively, in a L=12-path exponential decayed Rayleigh fading channel with σ of 0.043 µsec and fD of 20 Hz. This is because the chip interleaving obtains a higher diversity gain by replacing the chip assignment over the entire bandwidth. Meanwhile, in 16QAM data modulation with R=1/2, the performance of the chip interleaving is deteriorated, when Cmux/SF>0.25, due to the inter-code interference caused by different fading variations over the spreading duration since the successive chips during the spreading duration are interleaved to the separated sub-carriers. Thus, bit interleaving exhibits the best performance although the difference between bit interleaving and symbol interleaving is slight. Consequently, we conclude that the bit-interleaving method is the best among the three interleaving methods for reducing the required received Es/N0 considering the tradeoff between the randomization effect of burst errors and the mitigation of inter-code interference assuming the application of adaptive modulation and channel coding scheme in OFCDM employing frequency domain spreading.

This paper proposes a three-step cell search algorithm that utilizes only the common pilot channel (CPICH) in the forward link and employs spreading by a combination of a cell-specific scrambling code (CSSC) and an orthogonal short code for Orthogonal Frequency and Code Division Multiplexing (OFCDM) broadband packet wireless access. In the proposed cell search algorithm, the OFCDM symbol timing, i.e., Fast Fourier Transform (FFT) window timing, is estimated by detecting the guard interval timing in the first step. Then, in the second step, the frame timing and CSSC group are simultaneously detected by taking the correlation of the CPICH based on the property yielded by shifting the CSSC phase in the frequency domain. Finally, the CSSC within the group is identified in the third step. The most prominent feature of the proposed cell search algorithm is that it does not employ the conventional synchronization channel (SCH), which is exclusively used for the cell search. Computer simulation results elucidate that when the transmission power ratio of the CPICH to one code channel of the traffic channel (TCH) is 12 dB, the proposed cell search method achieves faster cell search time performance compared to the conventional method using the SCH with the transmission power ratio of the SCH to one code channel of the TCH of 6 dB. Furthermore, the results show that it can accomplish the cell search within 1.7 msec at 95% of the locations in a 12-path Rayleigh fading channel with the maximum Doppler frequency of 80 Hz and the r.m.s. delay spread of 0.32 µs.

This paper proposes Variable Spreading Factor-Orthogonal Frequency and Code Division Multiplexing (VSF-OFCDM) as the most promising forward link wireless access method in broadband packet wireless transmission using an approximate 50 to 100 MHz bandwidth. The proposed OFCDM employing VSF can flexibly realize near optimum wireless access satisfying higher radio link capacity both in isolated cell environments such as hot-spot areas and indoor offices and in multi-cell environments such as cellular systems by adaptively changing the appropriate spreading factor, SF, in the frequency domain based on the cell structure, radio link conditions such as the delay spread, and major radio link parameters such as the data modulation scheme and channel coding rate. Furthermore, by establishing SF=1, i.e., no spreading mode, VSF-OFCDM can be used as orthogonal frequency division multiplexing (OFDM). Computer simulation results demonstrate that, while SF=1 (OFDM) achieves higher link capacity than SF>1 in an isolated-cell environment, OFCDM with the optimized SF value over 1 achieves approximately 1.4 times higher capacity compared with OFDM in a multi-cell environment associated with the advantageous one-cell frequency reuse. Consequently, VSF-OFCDM can provide seamless deployment of broadband packet wireless access with higher radio link capacity, that is, OFDM in an isolated-cell environment, and OFCDM with the adaptively optimized SF value over 1 in a multi-cell environment according to the major radio link conditions and radio link parameters, by only changing the spreading factor.

This paper investigates the impact of inter-carrier interference (ICI) due to Doppler spread on the packet error rate (PER) performance in Orthogonal Frequency and Code Division Multiplexing (OFCDM) packet wireless access employing turbo coding in a multipath fading channel, and describes the optimization of the sub-carrier spacing, Δ f, i.e., the number of sub-carriers, Nc, with an approximate 50-100 MHz bandwidth. Simulation results show that although the uncoded OFCDM in a 1-path flat Rayleigh fading channel is affected by the ICI caused by the Doppler spread when the maximum Doppler frequency, fD, becomes more than 5% of Δ f, OFCDM employing turbo coding in a 24-path Rayleigh fading channel is robust against Doppler spread and the degradation is not apparent until fD reaches more than 10% of Δ f. This is because the turbo coding gain and the frequency diversity effect compensate for the degradation due to ICI. Meanwhile, the PER performance with a larger Nc is degraded, since the effect of the error correction capability becomes smaller due to the larger variance of the despread OFCDM symbols associated with the narrower spreading bandwidth in the frequency domain. Consequently, along with the packet frame efficiency for accommodating the guard interval to compensate for the maximum multipath delay time of 1 µsec, we clarify that the optimum number of sub-carriers is approximately 512-1024 (the corresponding Δ f becomes 156.3-78.1 kHz) for broadband OFCDM packet wireless access assuming a 50-100 MHz bandwidth.

This paper proposes a three-step cell search algorithm utilizing a synchronization channel (SCH) and common pilot channel (CPICH) in the forward link for OFCDM (Orthogonal Frequency and Code Division Multiplexing) broadband packet wireless access, and evaluates the cell search time performance by computer simulation. In the proposed three-step cell search algorithm, the OFCDM symbol timing, i.e., Fast Fourier Transform (FFT) window timing is estimated employing SCH or guard interval (GI) correlation in the first step. Then, the frame timing is detected by employing the SCH and the cell-specific scrambling code (CSSC) is identified by the CPICH in the second and third steps, respectively. Computer simulation results elucidate that the proposed three-step cell search algorithm achieves fast cell search time performance, i.e., cell detection probability of 90% within approximately 50 msec, assuming the number of CSSCs of 512 in a 19 hexagonal-cell model. We also clarify that there is no prominent difference in cell search time performance between the two employed SCH structures, time-multiplexed and frequency-multiplexed, assuming that the total transmit power of the SCH is the same. Based on the comparison of four substantial cell search algorithms, the GI-plus-SCH correlation method, in which FFT windowing timing detection, frame timing detection, and CSSC identification are performed by GI correlation, frequency-multiplexed SCH, and CPICH, respectively, exhibits the cell search time of approximately 44 msec at the detection probability of 90% with an optimized averaging parameter in each step.

This paper presents an optimum antenna diversity combining method associated with despreading that employs Minimum Mean Square Error (MMSE) combining over the frequency domain in a frequency-selective fading channel for forward link Orthogonal Frequency and Code Division Multiplexing (OFCDM) wireless access, in order to achieve the maximum radio link capacity. Simulation results considering various propagation channel conditions elucidate that the antenna diversity combining method with Equal Gain Combining (EGC) subsequent to the despreading employing MMSE combining based on pilot symbol-assisted channel estimation and interference power estimation can decrease the required average received signal energy per bit-to-background noise power spectrum density ratio (Eb/N0) the most, taking into account the impact of the inter-code interference. Furthermore, we clarify that the required average received Eb/N0 for the average packet error rate of 10-2 employing the diversity combining scheme with EGC after despreading with MMSE combining is improved by approximately 0.3 dB compared to the diversity combining scheme with EGC before despreading with MMSE combining at the number of code-multiplexing of 24 for the spreading factor of 32 in a 24-path Rayleigh fading channel.