We consider power and rate adaptations in multicarrier (MC) direct-sequence code-division multiple-access (DS/CDMA) communications under the assumption that channel state information is provided at both the transmitter and the receiver. We propose, as a power allocation strategy in the frequency domain, to transmit each user's DS waveforms over the user's sub-band with the largest channel gain, rather than transmitting identical DS waveforms over all sub-bands. We then adopt channel inversion power adaptation in the time domain, where the target user's received power level maintains at a fixed value. We also investigate rate adaptation in the time domain, where the data rate is adapted such that a desired transmission quality is maintained. We analyze the BER performance of the proposed power and rate adaptations with fixed average transmission power, and show that power adaptation in both the frequency and the time domains or combined power adaptation in the frequency domain and rate adaptation in the time domain make significant performance improvement over the power adaptation in the frequency domain only. We also compare the performance of the proposed power and rate adaptation schemes in MC-DS/CDMA systems to that of power and rate adapted single carrier DS/CDMA systems with RAKE receiver.

In this paper, we propose an adaptive data transmission scheme for DS/CDMA packet radio communication systems in bandlimited indoor multipath fading channels. We first analyze the relationship between the code rate and the processing gain (defined as the number of chips per coded bit) in maximizing the normalized throughput in connection with the channel state of the indoor multipath fading channels. One observation made is that the maximum throughput with BPSK modulation is attained when the code rate is chosen as low as possible irrespective of the channel state, and the processing gain is increased (decreased) as the channel becomes worse (better). The other observation made is that when DPSK modulation is employed, there exists an optimal combination of the code rate and the processing gain in maximizing the normalized throughput for each channel state. Based on these observations, we propose to adapt the processing gain and/or code rate according to the fading conditions in order to maximize the normalized throughput. We analyze the performance of the proposed scheme and compare it with the non-adaptive data transmission scheme. Our results show that the adaptive transmission scheme yields a significant performance improvement over the nonadaptive scheme, and increasing the adaptation level is more effective as the channel gets worse, but the 3-state adaptation seems to be practically optimum.

We consider a hybrid direct-sequence frequency-hopped (DS/FH) code division multiple access (CDMA) communication system, where the transmission power, data rate (i.e. spreading gain), and hopping frequency are adapted relative to the channel variations. Instead of random frequency hopping, hopping pattern is adaptively adjusted to obtain the maximum channel gain among available frequency slots. Transmission power and/or data rate are also adapted such that a target transmission quality is maintained. It is shown that the proposed scheme provides a higher average data rate than pure DS/CDMA with power and rate adaptations, subject to the identical bandwidth and average transmission power constraints.

This paper describes a technique for background digital multistage calibration in the removal of nonlinearities caused by design limitations in pipelined analog-to-digital converters (ADCs). Foreground initialization reduces the calibration time. Furthermore, an improved background skip-and-fill method enables the ADC to trace environmental changes. This method uses a least mean square adaptive algorithm that is digitally implemented with a significantly reduced number of tap coefficients.