1-14hit |
Utilizing the small bending radius of high index contrast optical waveguides, ultra-compact optical devices such as waveguide branch, Mach-Zehnder interferometer, arrayed waveguide grating filter, microring resonator filter, and so on can be realized. We have proposed and demonstrated a vertically coupled microring resonator as an Add/Drop filter, and recently realized a hitless wavelength channel selective switch (hitless tunable Add/Drop filter) using Thermo-Optic (TO) effect of double series coupled dielectric microring resonator. Using a high-index dielectric material as the core, the response time was reduced to 105 µs (rise time) and 15 µs (fall time), which are fifteen-fold and hundred-fold faster than that of polymer material, and the reproducibility by the heat cycle test was also improved to less than 0.01 nm. The tuning range of wavelength selective switch was expanded to 13.3 nm using the Vernier effect, and a large extinction ratio of more than 20 dB was realized. In this review, the principle and recent progress of microring resonator based wavelength selective switch will be introduced and some basic switching circuits required to optical cross connect will be discussed.
Vincenzo ERAMO Marco LISTANTI Federico GASPERINI
In this letter, we evaluate the performance of Optical Cross Connect (OXC) architectures equipped with limited-range wavelength converters. Performance will be evaluated according to both an optimum and a random output wavelength assignment strategy. Analytical and simulation results show the possibility to reduce the conversion degree of the Wavelength Converters while keeping network performance high.
Michiaki HAYASHI Tomohiro OTANI Hideaki TANAKA Masatoshi SUZUKI
Implementation issues on generalized multi-protocol label switching (GMPLS) -based photonic switching networks are experimentally analyzed. A resilient control plane architecture using in-fiber and out-of-fiber control channels is proposed to resolve issues of establishing the control plane in out-of-band networks. The resilient control plane is demonstrated in a photonic cross-connect (PXC) -based GMPLS network involving a 1,000 km transmission line. Fast signaling for provisioning and restoration operation is accomplished by implementing in-fiber control channels as primary, and the out-of-fiber control channels effectively operate as secondary and restore messaging of the control information between neighbors. The control channel protection is initiated by the link management protocol (LMP). Using the test bed, optical layer routing operation is investigated to assess the effects on the signal quality of wavelength paths, and transparent routing of the wavelength paths over one-hop and two-hops route is demonstrated within 1 dB difference regarding the Q factor. Stable operation of loss of light (LOL) -triggered restoration is demonstrated by setting the optical level threshold 5 dB higher than the amplified spontaneous emission (ASE) noise level.
Yoshihiro NAKAHIRA Saeko OSHIBA
This paper describes experimental results of the IP traffic condition based dynamic optical path allocation network system. In the system, optical paths are dynamically allocated between congested node pairs to cope with traffic fluctuations. It seems that this experiment is the first of its kind in the world.
Bernhard STREBEL Christoph CASPAR Hans-Martin FOISEL Carl WEINERT Lutz MOLLE
WDM transmission experiments over cascaded sections of optical links including wavelength converting 2R-transponders have been carried out in a loop testbed. Using dispersion compensated links and simple direct modulated transponder lasers, up to 11 cascaded crossconnects and 1750 km trunk lines have been bridged with 2.5 Gbit/s NRZ signals. The limitations are given mainly due to the accumulated jitter as it is shown by numerical simulations. The results indicate, that 2R-transponders are a useful approach to a flexible WDM network design using bitrate-transparent wavelength conversion.
Evan L. GOLDSTEIN Lih Y. LIN Robert W. TKACH
Over roughly the past decade, the lightwave-research community has converged upon a broad architectural vision of the emerging national-scale core network. The vision has been that of a transparent, reconfigurable, wavelength-routed network, in which signals propagate from source to destination through a sequence of intervening nodes without optoelectronic conversion. Broad benefits have been envisioned. Despite the spare elegance of this vision, it is steadily becoming clear that due to the performance, cost, management, and multivendor-interoperability obstacles attending transparency, the needs of civilian communications will not drive the core network to transparency on anything like a national scale. Instead, they will drive it to 'opaque' form, with critical reliance on optoelectronic conversion via transponders. Transponder-based network architectures in fact not only offer broad transmission and manageability benefits. They also make networking at the optical layer possible by offering to the nodes managed and performance-engineered standard-interface signals that can then be reconfigured for provisioning and restoration purposes by optical-layer elements. Because of this, the more pressing challenges in lightwave networking are steadily shifting towards the mechanisms that will be used for provisioning and restoration. Among these are mechanisms based on free-space micromachined optical crossconnects. We describe recent progress on these new devices and the architectures into which they fit, and summarize the reasons why they appear to be particularly well-matched to the task of provisioning and restoring opaque multiwavelength core long-haul networks.
Evan L. GOLDSTEIN Lih Y. LIN Robert W. TKACH
Over roughly the past decade, the lightwave-research community has converged upon a broad architectural vision of the emerging national-scale core network. The vision has been that of a transparent, reconfigurable, wavelength-routed network, in which signals propagate from source to destination through a sequence of intervening nodes without optoelectronic conversion. Broad benefits have been envisioned. Despite the spare elegance of this vision, it is steadily becoming clear that due to the performance, cost, management, and multivendor-interoperability obstacles attending transparency, the needs of civilian communications will not drive the core network to transparency on anything like a national scale. Instead, they will drive it to 'opaque' form, with critical reliance on optoelectronic conversion via transponders. Transponder-based network architectures in fact not only offer broad transmission and manageability benefits. They also make networking at the optical layer possible by offering to the nodes managed and performance-engineered standard-interface signals that can then be reconfigured for provisioning and restoration purposes by optical-layer elements. Because of this, the more pressing challenges in lightwave networking are steadily shifting towards the mechanisms that will be used for provisioning and restoration. Among these are mechanisms based on free-space micromachined optical crossconnects. We describe recent progress on these new devices and the architectures into which they fit, and summarize the reasons why they appear to be particularly well-matched to the task of provisioning and restoring opaque multiwavelength core long-haul networks.
Bernhard STREBEL Christoph CASPAR Hans-Martin FOISEL Carl WEINERT Lutz MOLLE
WDM transmission experiments over cascaded sections of optical links including wavelength converting 2R-transponders have been carried out in a loop testbed. Using dispersion compensated links and simple direct modulated transponder lasers, up to 11 cascaded crossconnects and 1750 km trunk lines have been bridged with 2.5 Gbit/s NRZ signals. The limitations are given mainly due to the accumulated jitter as it is shown by numerical simulations. The results indicate, that 2R-transponders are a useful approach to a flexible WDM network design using bitrate-transparent wavelength conversion.
Kristian E. STUBKJAER Allan KLOCH Peter Bukhave HANSEN Henrik N. POULSEN David WOLFSON Kim Stokholm JEPSEN Anders Thomas CLAUSEN Emmanuel LIMAL Alvaro BUXENS
Wavelength conversion is important since it ensures full flexibility of the WDM network layer. Progress in optical wavelength converter technology is reviewed with emphasis on all-optical wavelength converter types based on semiconductor optical amplifiers.
Kristian E. STUBKJAER Allan KLOCH Peter Bukhave HANSEN Henrik N. POULSEN David WOLFSON Kim Stokholm JEPSEN Anders Thomas CLAUSEN Emmanuel LIMAL Alvaro BUXENS
Wavelength conversion is important since it ensures full flexibility of the WDM network layer. Progress in optical wavelength converter technology is reviewed with emphasis on all-optical wavelength converter types based on semiconductor optical amplifiers.
State of the arts on guided-wave optical switch arrays are reviewed. In this paper, electro-optic Ti:LiNbO3 devices are mainly described in comparison with crosspoint switch element structures and switch array architectures. Packaging technologies and stability problems are discussed for practical system applications. Recent development on other materials such as semiconductor waveguides, thermo-optic glass/polymer waveguides are also reviewed briefly.
Kazunari HARADA Kenji SHIMIZU Nobuhiro SUGANO Teruhiko KUDOU Takeshi OZEKI
Wavelength division multiplex (WDM) photonic networks are expected as the key for the global communication infrastructure. Recent increase of communication demands require large-scale highly-dense WDM systems, which results in severe requirements for optical cross-connect systems, such as cross-talk specification. In this paper, we propose a new optical path cross-connect system (OPXC) using matrix-WDM scheme, which makes it possible to reduce cross-talk requirements of WDM filters and to construct OPXC in modular structures. The matrix-WDM scheme is a concept of two-layered optical paths, which provides wavelength group managements in the fiber dispersion equalization and EDFA gain equalization.
State of the arts on guided-wave optical switch arrays are reviewed. In this paper, electro-optic Ti:LiNbO3 devices are mainly described in comparison with crosspoint switch element structures and switch array architectures. Packaging technologies and stability problems are discussed for practical system applications. Recent development on other materials such as semiconductor waveguides, thermo-optic glass/polymer waveguides are also reviewed briefly.
Kazunari HARADA Kenji SHIMIZU Nobuhiro SUGANO Teruhiko KUDOU Takeshi OZEKI
Wavelength division multiplex (WDM) photonic networks are expected as the key for the global communication infrastructure. Recent increase of communication demands require large-scale highly-dense WDM systems, which results in severe requirements for optical cross-connect systems, such as cross-talk specification. In this paper, we propose a new optical path cross-connect system (OPXC) using matrix-WDM scheme, which makes it possible to reduce cross-talk requirements of WDM filters and to construct OPXC in modular structures. The matrix-WDM scheme is a concept of two-layered optical paths, which provides wavelength group managements in the fiber dispersion equalization and EDFA gain equalization.