1-2hit |
Kenichiro YASHIKI Toshinori UEMURA Mitsuru KURIHARA Yasuyuki SUZUKI Masatoshi TOKUSHIMA Yasuhiko HAGIHARA Kazuhiko KURATA
Aiming to solve the input/output (I/O) bottleneck concerning next-generation interconnections, 5×5-millimeters-squared silicon-photonics-based chip-scale optical transmitters/receivers (TXs/RXs) — called “optical I/O cores” — were developed. In addition to having a compact footprint, by employing low-power-consumption integrated circuits (ICs), as well as providing multimode-fiber (MMF) transmission in the O band and a user-friendly interface, the developed optical I/O cores allow common ease of use with applications such as multi-chip modules (MCMs) and active optical cables (AOCs). The power consumption of their hybrid-integrated ICs is 5mW/Gbps. Their high-density user-friendly optical interface has a spot-size-converter (SSC) function and permits the physical contact against the outer waveguides. As a result, they provide large enough misalignment tolerance to allow use of passive alignment and visual alignment. In a performance test, they demonstrated 25-Gbps/ch error-free operation over 300-m MMF.
I have examined factors for implementing a high-speed, low-power-consumption thermal head. In conventional thermal heads, a heat insulation layer is provided between the heating resistor and the radiator. I found it desirable to implement fast operation and low power consumption to lower the thermal conductivity of the heat insulation layer and to thin the heat insulation layer. I also found there is an optimum heat characteristic to the thickness of one heat insulation layer. I assumed polyimide as a material for the heat insulation layer which could materialize the hypothesis, and studied necessary items based on the thermal calculation. I manufactured a trial thermal head on the basis of this result and confirmed that our assumptions were correct. In addition, to confirm that the assumption is also ultimately correct, I fabricated a trial thermal head only consisting of a heating resistor and without a protective coat and a heat insulation layer. I confirmed that the structure with only the heating resistor exhibited excellent heat response and consumed less power necessary for heating.