A translucent wavelength switched optical network (WSON) is a cost-efficient infrastructure between opaque networks and transparent optical networks, which aims at seeking a graceful balance between network cost and service provisioning performance. In this paper, we experimentally present a resilient translucent WSON with the control of an enhanced path computation element (PCE) and extended generalized multi-protocol label switching (GMPLS) controllers. An adaptive routing and wavelength assignment scheme with the consideration of accumulated physical impairments, wavelength availabilities and regenerator allocation is experimentally demonstrated and evaluated for dynamic provisioning of lightpaths. By using two different network scenarios, we experimentally verify the feasibility of the proposed solutions in support of translucent WSON, and quantitatively evaluate the path computation latency, network blocking probability and service disruption time during end-to-end lightpath restoration. We also deeply analyze the experimental results and discuss the synchronization between the PCE and the network status. To the best of our knowledge, the most significant progress and contribution of this paper is that, for the first time, all the proposed methodologies in support of PCE/GMPLS controlled translucent WSON, including protocol extensions and related algorithms, are implemented in a network testbed and experimentally evaluated in detail, which allows verifying their feasibility and effectiveness when being potentially deployed into real translucent WSON.

We propose a novel adaptive segment repair mechanism to improve traditional MPLS (Multi-Protocol Label Switching) failure recovery. The proposed mechanism protects one or more contiguous high failure probability links by dynamic setup of segment protection. Simulations demonstrate that the proposed mechanism reduces failure recovery time while also increasing network resource utilization.

In this research, we focused on fair bandwidth allocation on the Internet. The Internet provides communication services based on exchanged packets. The bandwidth available for each customer is often fluctuated. Fair bandwidth allocation is an important issue for ISPs to gain customer satisfaction. Static bandwidth allocation allows an exclusive bandwidth for specific traffic. Although it gives communications a QoS guarantee, it requires muany bandwidth resources as known as over-provisioning. In contrast with static control, dynamic control allocates bandwidth resources dynamically. It therefore utilizes bandwidth use more effectively. However, it needs control overhead in monitoring traffic and estimating the optimum allocation. The Transmission Control Protocol, or TCP is the dominant protocol on the Internet. It is also equipped with a traffic-rate-control mechanism. An adaptive bandwidth-allocation mechanism must control traffic that is under TCP control. Rapid feedback makes it possible to gain an advantage over TCP control. In this paper, we propose an Adaptive Bandwidth Allocation (ABA) mechanism as a feedback system for MPLS. Our proposal allows traffic to be regulated adaptively as its own weight value which can be assigned by administrators. The feedback bandwidth allocation in the previous work needs round-trip control delay in collecting network status along the communication path. We call this "round-trip feedback control." Our proposal, called "one-way feedback control," collects network status in half the time of roundtrip delay. We compare the performance of our one-way feedback-based mechanism and traditional round-trip feedback control under a simulation environment. We demonstrate the advantages of our rapid feedback control has using experimental results.

Asynchronous optical packet switching (OPS) is a promising solution to support the continuous growth of transmission capacity demand. It has been, however, quite difficult to implement key functions needed at the node of such networks with all-optical approaches. We have proposed a new optoelectronic system composed of a packet-by-packet optical clock-pulse generator (OCG), an all-optical serial-to-parallel converter (SPC), a photonic parallel-to-serial converter (PSC), and CMOS circuitry. The system makes it possible to carry out various required functions such as buffering (random access memory), optical packet compression/decompression, and optical label swapping for high-speed asynchronous optical packets.

In order to transport an ever-increasing amount of IP traffic effectively, Photonic IP networks that employ wavelength routing and Layer 3 cut-through are very important. This paper proposes a new network design algorithm that minimizes the network cost considering IP traffic growth for multi-layered photonic IP networks that comprise electrical label switched paths (LSPs) and optical LSPs. We evaluate the network cost obtained from the developed network design algorithm that considers IP traffic growth and compare it to the results obtained from a static zero-based algorithm. The static zero-based algorithm does not take into account the history of progressive past IP traffic changes/growth until that time. The results show that our proposed algorithm is very effective; the cost increase from the cost obtained using the zero-based algorithm is marginal. The algorithm developed herein enables effective multi-layered photonic IP network design that can be applied to practical networks where IP traffic changes/increases progressively and that can be used for long term network provisioning.

Implementation issues on generalized multi-protocol label switching (GMPLS) -based photonic switching networks are experimentally analyzed. A resilient control plane architecture using in-fiber and out-of-fiber control channels is proposed to resolve issues of establishing the control plane in out-of-band networks. The resilient control plane is demonstrated in a photonic cross-connect (PXC) -based GMPLS network involving a 1,000 km transmission line. Fast signaling for provisioning and restoration operation is accomplished by implementing in-fiber control channels as primary, and the out-of-fiber control channels effectively operate as secondary and restore messaging of the control information between neighbors. The control channel protection is initiated by the link management protocol (LMP). Using the test bed, optical layer routing operation is investigated to assess the effects on the signal quality of wavelength paths, and transparent routing of the wavelength paths over one-hop and two-hops route is demonstrated within 1 dB difference regarding the Q factor. Stable operation of loss of light (LOL) -triggered restoration is demonstrated by setting the optical level threshold 5 dB higher than the amplified spontaneous emission (ASE) noise level.