1-9hit |
There are two types of elliptic curves, ordinary elliptic curves and supersingular elliptic curves. In 2012, Sutherland proposed an efficient and almost deterministic algorithm for determining whether a given curve is ordinary or supersingular. Sutherland's algorithm is based on sequences of isogenies started from the input curve, and computation of each isogeny requires square root computations, which is the dominant cost of the algorithm. In this paper, we reduce this dominant cost of Sutherland's algorithm to approximately a half of the original. In contrast to Sutherland's algorithm using j-invariants and modular polynomials, our proposed algorithm is based on Legendre form of elliptic curves, which simplifies the expression of each isogeny. Moreover, by carefully selecting the type of isogenies to be computed, we succeeded in gathering square root computations at two consecutive steps of Sutherland's algorithm into just a single fourth root computation (with experimentally almost the same cost as a single square root computation). The results of our experiments using Magma are supporting our argument; for cases of characteristic p of 768-bit to 1024-bit lengths, our proposed algorithm for characteristic p≡1 (mod 4) runs in about 61.5% of the time and for characteristic p≡3 (mod 4) also runs in about 54.9% of the time compared to Sutherland's algorithm.
Haoran LI Binyu WANG Jisheng DAI Tianhong PAN
Homotopy algorithm provides a very powerful approach to select the best regularization term for the l1-norm minimization problem, but it is lack of provision for handling singularities. The singularity problem might be frequently encountered in practical implementations if the measurement matrix contains duplicate columns, approximate columns or columns with linear dependent in kernel space. The existing method for handling Homotopy singularities introduces a high-dimensional random ridge term into the measurement matrix, which has at least two shortcomings: 1) it is very difficult to choose a proper ridge term that applies to several different measurement matrices; and 2) the high-dimensional ridge term may accumulatively degrade the recovery performance for large-scale applications. To get around these shortcomings, a modified ridge-adding method is proposed to deal with the singularity problem, which introduces a low-dimensional random ridge vector into the l1-norm minimization problem directly. Our method provides a much simpler implementation, and it can alleviate the degradation caused by the ridge term because the dimension of ridge term in the proposed method is much smaller than the original one. Moreover, the proposed method can be further extended to handle the SVMpath initialization singularities. Theoretical analysis and experimental results validate the performance of the proposed method.
This paper proposes a novel image integral equation of the first type (IIE-1) for a TE plane wave scattering from periodic rough surfaces with perfect conductivity by means of the method of image Green's function. Since such an IIE-1 is valid for any incident wavenumbers including the critical wavenumbers, the analytical properties of the scattered wavefield can be generally and rigorously discussed. This paper firstly points out that the branch point singularity of the bare propagator inevitably appears on the incident wavenumber characteristics of the scattered wavefield and its related quantities just at the critical wavenumbers. By applying a quadrature method, the IIE-1 becomes a matrix equation to be numerically solved. For a periodic rough surface, several properties of the scattering are shown in figures as functions of the incident wavenumbers. It is then confirmed that the branch point singularity clearly appears in the numerical solution. Moreover, it is shown that the proposed IIE-1 gives a numerical solution satisfying sufficiently the optical theorem even for the critical wavenumbers.
Tomohiko OHTSUKA Daisuke WATANABE
The singular points of fingerprints, viz. core and delta, are important referential points for the classification of fingerprints. Several conventional approaches such as the Poincare index method have been proposed; however, these approaches are not reliable with poor-quality fingerprints. This paper proposes a new core and delta detection employing singular candidate analysis and an extended relational graph. Singular candidate analysis allows the use both the local and global features of ridge direction patterns and realizes high tolerance to local image noise; this involves the extraction of locations where there is high probability of the existence of a singular point. Experimental results using the fingerprint image databases FVC2000 and FVC2002, which include several poor-quality images, show that the success rate of the proposed approach is 10% higher than that of the Poincare index method for singularity detection, although the average computation time is 15%-30% greater.
Taoi HSU Wen-Liang HWANG Jiann-Ling KUO Der-Kuo TUNG
In this paper, a novel Wold decomposition algorithm is proposed to address the issue of deterministic component extraction for texture images. This algorithm exploits the wavelet-based singularity detection theory to process both harmonic a nd evanescent features from frequency domain. This exploitation is based on the 2D Lebesgue decomposition theory. When applying multiresolution analysis techniq ue to the power spectrum density (PSD) of a regular homogeneous random field, its indeterministic component will be effectively smoothed, and its deterministic component will remain dominant at coarse scale. By means of propagating these positions to the finest scale, the deterministic component can be properly extracted. From experiment, the proposed algorithm can obtain results that satisfactorily ensure its robustness and efficiency.
Huiqin JIANG Takashi YAHAGI Jianming LU
Automatic image inspector inspects the quality of printed circuit boards using image-processing technology. In this study, we change an automatic inspection problem into a problem for detecting the signal singularities. Based on the wavelet theory that the wavelet transform can focus on localized signal structures with a zooming procedure, a novel singularity detection and measurement algorithm is proposed. Singularity positions are detected with the local wavelet transform modulus maximum (WTMM) line, and the Lipschitz exponent is estimated at each singularity from the decay of the wavelet transform amplitude along the WTMM line. According to the theoretical analysis and computer simulation results, the proposed algorithm is shown to be successful for solving the automatic inspection problem and calculating the Lipschitz exponents of signals. These Lipschitz exponents successfully characterize singular behavior of signals at singularities.
Suk-Hwan LEE Seong-Geun KWON Kee-Koo KWON Byung-Ju KIM Jong-Won LEE Kuhn-Il LEE
The current paper presents an effective deblocking algorithm for block-based coded images using singularity detection in a wavelet transform. Blocking artifacts appear periodically at block boundaries in block-based coded images. The local maxima of a wavelet transform modulus detect all singularities, including blocking artifacts, from multiscale edges. Accordingly, the current study discriminates between a blocking artifact and an edge by estimating the Lipschitz regularity of the local maxima and removing the wavelet transform modulus of a blocking artifact that has a negative Lipschitz regularity exponent. Experimental results showed that the performance of the proposed algorithm was objectively and subjectively superior.
Hajime IGARASHI Toshihisa HONMA
This paper describes a finite element method to obtain an accurate solution of the scalar Helmholtz equation with field singularities. It is known that the spatial derivatives of the eigenfunction of the scalar Helmholtz equation become infinite under certain conditions. These field singularities under mine the accuracy of the numerical solutions obtained by conventional finite element methods based on piecewise polynomials. In this paper, a regularized eigenfunction is introduced by subtracting the field singularities from the original eigenfunction. The finite element method formulated in terms of the regularized eigenfunction is expected to improve the accuracy and convergence of the numerical solutions. The finite element matrices for the present method can be easily evaluated since they do not involve any singular integrands. Moreover, the Dirichlet-type boundary conditions are explicitly imposed on the variables using a transform matrix while the Neumann-type boundary conditions are implicitly imposed in the functional. The numerical results for three test problems show that the present method clearly improves the accuracy of the numerical solutions.
Hiroshi SHIRAI Eiji NAKANO Mikio YANO
Transient responses by a dielectric sphere have been analyzed here for a dipole source located at the center. The formulation has been constructed first in the frequency domain, then transformed into the time domain to obtain for an impulsive response by two analytical methods, namely the Singularity Expansion Method and the Wavefront Expansion Method. While the former method collects the contributions around the singularities in the complex frequency domain, the latter gives us a result which is a summation of each successive wavefront arrivals. A Gaussian pulse has been introduced to simulate an impulse response result. The Gaussian pulse response is analytically formulated by convolving Gaussian pulse with the corresponding impulse response. Numercal inversion results are also calculated by Fast Fourier Transform Algorithm. Numerical examples are shown here to compare the results obtained by these three methods and good agreement are obtained between them. Comments are often made in connection with the corresponding two dimensional cylindrical case.