Multivariate Public Key Cryptography (MPKC) is one of the main candidates for secure communication in a post-quantum era. Recently, Yasuda and Sakurai proposed at ICICS 2015 a new multivariate encryption scheme called SRP, which offers efficient decryption, a small blow up factor between plaintext and ciphertext and resists all known attacks against multivariate schemes. However, similar to other MPKC schemes, the key sizes of SRP are quite large. In this paper we propose a technique to reduce the key size of the SRP scheme, which enables us to reduce the size of the public key by up to 54%. Furthermore, we can use the additional structure in the public key polynomials to speed up the encryption process of the scheme by up to 50%. We show by experiments that our modifications do not weaken the security of the scheme.

Given an integer n-dimensional lattice basis, the random sampling reduction was proven to find a short vector in arithmetic steps with an integer k, which is freely chosen by users. This paper introduces new random sampling reduction using precomputation techniques. The computation cost is almost independent of the lattice dimension number. The new method is therefore especially advantageous to find a short lattice vector in higher dimensions. The arithmetic operation number of our new method is about 20% of the random sampling reduction with 200 dimensions, and with 1000 dimensions it is less than 1% ( 1/130) of that of the random sampling reduction with representative parameter settings under reasonable assumptions.

Ground antennas are suitable for use in mobile electronic devices due to their compactness. These ground antennas incorporate two capacitors for controlling the resonance frequency and a shorting loop for impedance matching. In this work, we compare the performance of a ground antenna with that of a meandered inverted-F antenna (IFA). It is numerically and experimentally shown that a ground antenna can yield simultaneous improvements in both the antenna size and radiation efficiency when compared to the meandered IFA. The bandwidth of the ground antenna for a voltage standing wave ratio (VSWR) of 3:1 is 240 MHz from 2350 MHz to 2590 MHz, while the minimum total antenna efficiency is 62% within the 2.4 GHz ISM band.

In this paper, to reduce the memory size requirements of IFFT for OFDM-based applications, we propose a new IFFT design technique based on a combined integer mapping of three IFFT input signals: modulated data, pilot and null signals. The proposed method focuses on reducing the size of memory cells in the first two stages of the single-path delay feedback (SDF) IFFT architectures since the first two stages require 75% of the total memory cells. By simulations of 2048-point IFFT design for cognitive radio systems, it is shown that the proposed IFFT design method achieves more than 13% reduction in gate count and 11% reduction in power consumption compared with conventional IFFT design.

In this article, a simple structure of the Wilkinson power divider which can suppress the nth harmonics of the Wilkinson power divider is proposed. By replacing the quarter wavelength transmission lines of the conventional Wilkinson power divider with the equivalent P-type transmission lines, a compact power divider which can suppress the nth harmonic is achieved. Design equations of proposed P-type line are achieved by ABCD matrices. To verify the design approach, the proposed power divider is designed, simulated (by ADS, CST Studio, and Sonnet simulators), and fabricated at 1 GHz to suppress the fifth harmonic. The proposed structure is 46% of the conventional Wilkinson power divider, while maintaining the characteristics of the conventional Wilkinson power divider at the fundamental frequency. The insertion losses at the fifth harmonic are larger than 35 dB. Furthermore, the second to seventh harmonic are suppressed by least 10 dB. Here is an excellent agreement between simulated results and measured results.

This paper treats a band-broadening design technique of a dual-band branch-line coupler with matching networks composed of an impedance step and a short-circuited stub based on the equivalent admittance approach. By replacing each right-handed transmission line (RH-TL) with a composite right/left-handed transmission line (CRLH-TL), very flat couplings over a relative bandwidth of about 10% can be obtained at two arbitrary operating frequencies in comparison with previous CRLH-TLs branch-line couplers. Furthermore, by adding periodical open-circuited stubs into RH-TLs of the designed CRLH-TLs branch-line coupler with matching networks, the entire size of the coupler can be reduced to about 50%. Verification of these band-broadening and size-reduction design techniques can be also shown by an electromagnetic simulation and experiment.

In this letter, a novel design of a branch-line coupler with considerable reduction in its size and suppressed harmonic passband is proposed. By embedding a defected ground structure (DGS) unit cell under a microstrip line, compact branch-line couplers are easily achieved. The electrical length is scaled appropriately according to the slow-wave effect. In this case, the experimental coupling (S21 or S31) is comparable to that of conventional branch-line couplers. Also, experimental results indicate that DGS section is quite effective for the suppression of higher order harmonics.

We propose a method for reducing the size of a share in visual secret sharing schemes. The proposed method does not cause the leakage and the loss of the original image. The quality of the recovered image is almost same as that of previous schemes.

A rat-race hybrid-ring which includes a coupled-line called microwave C-section is proposed for size reduction. The perfect input match, isolation, equal power split and certain phase differences between two output ports can be satisfied at center frequency as in a normal hybrid-ring. The size of the proposed circuit becomes smaller than that of a normal rat-race built up with a folded non-coupled 3/4-wavelength transmission line, although the frequency characteristics are slightly damaged by the electromagnetic coupling between two folded strips. Theoretical results based on the even and odd mode decomposition method are in good agreement with those of the experimental circuit fabricated at 1 GHz.

Recent works have shown that the size reduction of printed dipole antennas was possible thanks to a proper shaping of the radiating element. Following the same idea (choice of suitable shape), a shortened slot fed patch antenna exhibiting two step discontinuities, is described, analysed and optimized with a simple transmission line model. The shortening ratio (ρ) can reach 80% for matched antenna, printed on a substrate with a low dielectric constant (εr=2.2). The calculated results of input impedance are validated by experiment.

Novel, very small-size multilayer MMIC's using miniature microstrip lines on a thin dielectric film, as well as the features of the multilayer structure, are presented. Very narrow-width thin-film transmission lines, meander-like configurations, line crossovers, and vertical connections, which are effective for significant chip-size reduction and flexible layout, are realized and utilized in a 2.5-3 µmN-layer dielectric film structure. 180-degree and 90-degree hybrids and umltiport Wilkinson dividers, which are implemented in small areas of 0.1 mm2 and 1.7 mm2, are presented. Furthermore, layout flexibility in the multilayer structure is demonstrated by implementing distributed amplifiers into the layers.