The use of frequency-domain equalization (FDE) based on minimum mean square error (MMSE) criterion can significantly improve the downlink bit error rate (BER) performances of DS- and MC-CDMA in a frequency-selective fading channel. However, the uplink BER performance degrades due to a strong multi-user interference (MUI). In this paper, we propose frequency-interleaved spread spectrum (SS) using MMSE-FDE, in which the subcarrier components of each user's signal are interleaved onto a wider bandwidth. Then, the frequency-interleaved frequency-domain signal is transformed into a time-domain signal by the inverse fast Fourier transform (IFFT). Frequency-interleaving patterns assigned to different users are orthogonal to each other. The proposed scheme can avoid the MUI completely while achieving frequency diversity gain due to MMSE-FDE. It is shown by computer simulation that the use of frequency-interleaving can significantly improve the uplink performance in a frequency-selective Rayleigh fading channel.

A simplified analysis is presented for the reverse link capacity of DS-CDMA mobile radio with transmit power control (TPC) based on measurement of signal-to-interference plus background noise (SIR) when users require different levels of quality. The link capacity is defined as the maximum achievable sum of the required SIRs, and the increase in transmit power due to SIR-based TPC is discussed. Also analyzed is the total link capacity when narrowband DS-CDMA systems share the radio spectrum of a wideband system. The capacity loss due to non-uniform use of the spectrum is discussed.

For the power controlled DS-CDMA reverse link, two important issues must be addressed when using a Rake combiner with a limited path diversity order (defined as the number of resolved paths used for combining): the decrease in link capacity and the increase in peak transmit power. The peak transmit power is an important design parameter of transmit power amplifiers. In this paper, expressions for the achievable capacity and required peak transmit power under an multi-cell environment are developed. Based on the developed expressions, the relative capacity and required peak transmit power are evaluated theoretically and by Monte Carlo simulations under multipath Rayleigh fading environments with uniform and exponential power delay profiles. The effects of Rake based on maximal ratio combining (MRC) and selection combining (SC) are compared. The influence of the power delay profile shapes is also discussed.

In MC-CDMA, the data rate can be increased by reducing the spreading factor SF or by allowing multicode transmission. In this paper, we examine by computer simulations which gives a better bit error rate (BER) performance--lower SF or multicode operation--when high level modulation is used in addition to error control coding. For a coded system in a frequency selective channel, there is a trade-off among frequency diversity gain due to spreading, improved coding gain due to better frequency interleaving effect and orthogonality distortion. It is found that for QPSK, the performance of OFDM (MC-CDMA with SF = 1) is almost the same as that of a fully spread MC-CDMA system. However, for 16QAM and 64QAM, the BER performance is better for lower SF unlike the uncoded system, wherein higher SF gives a better BER.

A practical dual scanning diversity system is described and its diversity effect in a digital FM with limiter discriminator detection is experimentally verified using a Rayleigh fading simulator.

Multi-user multi-input multi-output (MIMO) system has been attracting much attention due to its high spectrum efficiency. Non-linear MIMO signal detection methods with less computational complexity have been widely studied for single-user MIMO systems. In this paper, we investigate how a lattice reduction (LR)-aided detection and a maximum likelihood detection (MLD) employing the QR decomposition and M-algorithm (QRM-MLD), which are commonly known as non-linear MIMO signal detection methods, improve the uplink capacity of a multi-user MIMO-OFDM cellular system, compared to simple linear detection methods such as zero-forcing detection (ZFD) and minimum mean square error detection (MMSED). We show that both LR-aided linear detection and QRM-MLD can achieve higher uplink capacity than simple linear detection at the cost of moderate increase of computational complexity. Furthermore, QRM-MLD can obtain the same uplink capacity as MLD.

Recently, assuming ideal brick-wall transmit filtering, we proposed a frequency-domain block signal detection (FDBD) with maximum likelihood detection employing QR decomposition and M-algorithm (called QRM-MLD) for the reception of single-carrier (SC) signals transmitted over a frequency-selective fading channel. QR decomposition (QRD) is applied to a concatenation of the propagation channel and discrete Fourier transform (DFT). However, a large number of surviving paths is required in the M-algorithm to achieve sufficiently improved bit error rate (BER) performance. The introduction of filtering can achieve improved BER performance due to larger frequency diversity gain while keeping a lower peak-to-average power ratio (PAPR) than orthogonal frequency division multiplexing (OFDM). In this paper, we develop FDBD with QRM-MLD for filtered SC signal reception. QRD is applied to a concatenation of transmit filter, propagation channel, and DFT. We evaluate BER and throughput performances by computer simulation. From performance evaluation, we discuss how the filter roll-off factor affects the achievable BER and throughput performances and show that as the filter roll-off factor increases, the required number of surviving paths in the M-algorithm can be reduced.

A switched-capacitor integrator based on dynamic source follower amplifiers has been proposed. Integrator operation has been confirmed and analyzed by assuming 0.18-µm CMOS technology. The integrator can reduce the number of elements considerably compared with conventional ones using operational amplifiers. As a result, the power dissipation of proposed integrator can be reduced to approximately one-eighth that of conventional integrators. The integrator is applied to a second-order ΔΣ modulator, and its successful operation has been confirmed by transistor-level circuit simulation.

Orthogonal frequency division multiplexing (OFDM), which uses a number of narrowband orthogonal sub-carriers, is a promising transmission technique. Also multi-carrier code division multi-access (MC-CDMA), which combines OFDM and frequency-domain spreading, has been attracting much attention as a future broadband wireless access. It was shown that MC-CDMA has lower channel capacity than OFDM, due to inter-code interference (ICI) resulting from orthogonality distortion caused by frequency-selective fading. Recently, many ICI cancellers have been proposed to mitigate the effect of ICI. In this paper, we derive a channel capacity expression for MC-CDMA assuming perfect ICI cancellation taking into account both frequency diversity gain and space diversity gain and compare it to that of OFDM. Furthermore, we derive a channel capacity expression for the case of imperfect ICI cancellation to discuss the impact of the residual ICI.

Code division multiple access (CDMA) technique is used widely since it can flexibly support multi-rate multi-media services by changing the number of orthogonal spreading codes. In this paper, we present a new adaptive code assignment algorithm, which consists of three steps: reserved-space, improved-crowded-first-space, and multi-code combination to fully use the code space. Compared with the existing algorithms, the proposed algorithm can avoid the code blocking problem and lower its total blocking probability while keeping its computational complexity relatively low. Simulation results show that increasing the free space reduces the average total blocking probability while increasing the blocking probability of high rate users.

In this paper, we propose a joint transmit and receive linear filtering based on minimum mean square error criterion (joint Tx/Rx MMSE filtering) for single-carrier (SC) multiple-input multiple-output (MIMO) transmission. Joint Tx/Rx MMSE filtering transforms the MIMO channel to the orthogonal eigenmodes to avoid the inter-antenna interference (IAI) and performs MMSE based transmit power allocation to sufficiently suppress the inter-symbol interference (ISI) resulting from the severe frequency-selectivity of the channel. Rank adaptation and adaptive modulation are jointly introduced to narrow the gap of received signal-to-interference plus noise power ratio (SINR) among eigenmodes. The superiority of the SC-MIMO transmission with joint Tx/Rx MMSE filtering and joint rank adaptation/adaptive modulation is confirmed by computer simulation.

Recently, we proposed an interference-aware channel segregation based dynamic channel assignment (IACS-DCA). In IACS-DCA, each base station (BS) measures the instantaneous co-channel interference (CCI) power on each available channel, computes the moving average CCI power using past CCI measurement results, and selects the channel having the lowest moving average CCI power. In this way, the CCI-minimized channel reuse pattern can be formed. In this paper, we introduce the autocorrelation function of channel reuse pattern, the fairness of channel reuse, and the minimum co-channel BS distance to quantitatively examine the channel reuse pattern formed by the IACS-DCA. It is shown that the IACS-DCA can form a CCI-minimized channel reuse pattern in a distributed manner and that it improves the signal-to-interference ratio (SIR) compared to the other channel assignment schemes.

In the conventional iterative superimposed pilot-assisted channel estimation (SI-PACE), simple averaging of the instantaneous channel estimates obtained by using the pilot over several single-carrier (SC) blocks (called the frame in this paper) is taken in order to reduce the interference from data symbols. Therefore, the conventional SI-PACE has low tracking ability against fading time variations. To solve the tracking problem, Wiener filtering (WF)-based averaging can be used instead of simple averaging. However, WF incurs high computational complexity. Furthermore, the estimation error of the fading autocorrelation function significantly degrades the channel estimation accuracy. In order to improve the channel estimation accuracy while keeping the computational complexity low, a new iterative SI-PACE using sliding WF (called iterative SWFSI-PACE) is proposed. The channel estimation is done by sliding a WF having a shorter filter size than the measurement interval. The bit error rate (BER) and throughput performances of SC-FDE using iterative SWFSI-PACE are investigated by computer simulation to show that the proposed scheme achieves good BER and throughput performances while keeping the computational complexity low irrespective of the fading rate (or maximum Doppler frequency).

Maximum likelihood block signal detection employing QR decomposition and M-algorithm (QRM-MLBD) can significantly improve the bit error rate (BER) performance of single-carrier (SC) transmission while significantly reducing the computational complexity compared to maximum likelihood detection (MLD). However, its computational complexity is still high. In this paper, we propose the computationally efficient 2-step QRM-MLBD. Compared to conventional QRM-MLBD, the number of symbol candidates can be reduced by using preliminary decision made by minimum mean square error based frequency-domain equalization (MMSE-FDE). The BER performance achievable by 2-step QRM-MLBD is evaluated by computer simulation. It is shown that it can significantly reduce the computational complexity while achieving almost the same BER performance as the conventional QRM-MLBD.

Recently, a new frequency-domain equalization (FDE) technique, called overlap FDE, that requires no GI insertion was proposed. However, the residual inter/intra-block interference (IBI) cannot completely be removed. In addition to this, for multicode direct sequence code division multiple access (DS-CDMA), the presence of residual inter-chip interference (ICI) after FDE distorts orthogonality among the spreading codes. In this paper, we propose an iterative overlap FDE for multicode DS-CDMA to suppress both the residual IBI and the residual ICI. In the iterative overlap FDE, joint minimum mean square error (MMSE)-FDE and ICI cancellation is repeated a sufficient number of times. The bit error rate (BER) performance with the iterative overlap FDE is evaluated by computer simulation.

Similar to direct sequence code division multiple access (DS-CDMA), site diversity can be applied to a multicarrier-CDMA (MC-CDMA) cellular system to improve the bit error rate (BER) performance for a user with weak received signal power, thus resulting in an increased link capacity. In this paper, the downlink site diversity reception using frequency-domain equalization based on minimum mean square error (MMSE) is considered for a MC-CDMA cellular system. A set of active base stations to be involved in the site diversity operation is determined based on the received signal power measurement by a mobile station. Downlink capacity with site diversity is evaluated by computer simulation. The impacts of path loss exponent and shadowing loss standard deviation on the site diversity effect are discussed. Furthermore, the performance improvement by antenna diversity reception is discussed.

In this Letter, a frequency-domain pre-rake transmission is presented for a direct sequence spread spectrum with time division duplex (DSSS/TDD) system under a frequency-selective fading channel. The mathematical relationship between frequency-domain and time-domain pre-rake transmissions is discussed. It is confirmed by the computer simulation that, similar to the time-domain pre-rake transmission, frequency-domain pre-rake transmission can improve the bit error rate (BER) performance. The frequency-domain pre-rake transmission shows only slight performance degradation compared to the frequency-domain rake reception for large SF.

Joint frequency-domain equalization (FDE) and antenna diversity combining is applied to the reception of multi-rate DS-CDMA signals to achieve the frequency diversity effect while suppressing inter-path interference (IPI) resulting from the asynchronism of different propagation paths. At a receiver, fast Fourier transform (FFT) is applied for FDE and then inverse FFT (IFFT) is used to obtain a frequency-domain equalized DS-CDMA chip sequence for the succeeding despreading operation. An arbitrary spreading factor SF can be used for the given value of FFT window size; an extreme case is the nonspread SC system with SF=1. This property allows a flexible design of multi-rate DS-CDMA systems. Three types of FDE are considered; minimum mean square error (MMSE) equalization, maximal-ratio combining (MRC) equalization and zero-forcing (ZF) equalization. Matched filter bound analysis for achievable BER performance is presented. The improvement in the BER performance in a frequency-selective Rayleigh fading channel is evaluated by computer simulation. First, we consider the single-user case and compare the BER performances achievable with MMSE, MRC and ZF equalizations. How the fading rate and the spreading factor affect the BER performance is also evaluated. Furthermore, the BER performance comparison between FDE and rake combining is presented for various values of SF and also performance comparison between DS-CDMA and SC signal transmissions, both using FDE, is presented. Finally, we extend our evaluation to the multi-user case. Both downlink and uplink are considered and how the BER performances of downlink and uplink differ is discussed.

Severe frequency-selective fading, encountered in a broadband wireless mobile communication, significantly degrades the bit error rate (BER) performance of direct sequence spread spectrum (DSSS) signal transmission with rake combining. In this paper, frequency-domain pre-equalization transmission, called pre-FDE transmission, is presented for orthogonal multicode DSSS signal transmission. It is confirmed by the computer simulation that pre-FDE transmission can achieve a BER performance almost identical to that attainable by FDE reception.

Orthogonal multi-carrier direct sequence code division multiple access (orthogonal MC DS-CDMA) is a combination of orthogonal frequency division multiplexing (OFDM) and time-domain spreading, while multi-carrier code division multiple access (MC-CDMA) is a combination of OFDM and frequency-domain spreading. In MC-CDMA, a good bit error rate (BER) performance can be achieved by using frequency-domain equalization (FDE), since the frequency diversity gain is obtained. On the other hand, the conventional orthogonal MC DS-CDMA fails to achieve any frequency diversity gain. In this paper, we propose a new orthogonal MC DS-CDMA that can obtain the frequency diversity gain by applying FDE. The conditional BER analysis is presented. The theoretical average BER performance in a frequency-selective Rayleigh fading channel is evaluated by the Monte-Carlo numerical computation method using the derived conditional BER and is confirmed by computer simulation of the orthogonal MC DS-CDMA signal transmission.