Application of microwave and millimeter-wave circuit technologies to InGaP-HBT ICs for 40-Gbps optical-transmission systems is demonstrated from two aspects. First, ICs for various important functions -- amplification of data signals, amplification, frequency doubling, and phase control of clock signals -- are successfully developed based on microwave and millimeter-wave circuit configurations mainly composed of distributed elements. A distributed amplifier exhibits ≥164-GHz gain-bandwidth product with low power consumption (PC) of 71.2 mW. A 20/40-GHz-band frequency doubler achieves wideband performance (40%) with low PC (26 mW) by integrating a high-pass filter and a buffer amplifier (as a low-pass filter). A compact 40-GHz analog phase shifter, 20- and 40-GHz-band clock amplifiers with low PC are also realized. Second, a familiar concept in microwave-circuit design is applied to a high-speed digital circuit. A new approach -- inserting impedance-transformer circuits -- to enable 'impedance matching' in digital ICs is successfully applied to a 40-Gbps decision circuit to prevent unwanted gain peaking and jitter increase caused by transmission lines without sacrificing chip size.

A monolithic modulator driver IC based on InP HBTs with a new circuit topology -- called a functional distributed circuit (FDC) -- for over 80-Gb/s optical transmission systems has been developed. The FDC topology includes a wide-band amplifier designed using a distributed circuit, a digital function designed using a lumped circuit, and broadband impedance matching between the lumped circuit and distributed circuit to enable both wider bandwidth and digital functions. The driver IC integrated with a 2:1 multiplexing function produces 2.6-Vp-p (differential output: 5.2 Vp-p) and 2.4- Vp-p (differential output: 4.8 Vp-p) output-voltage swings with less than 450-fs and 530-fs rms jitter at 80 Gb/s and 90 Gb/s, respectively. To the best of our knowledge, this is equivalent to the highest data rate operation yet reported for monolithic modulator drivers. When it was mounted in a module, the driver IC successfully achieved electro-optical modulation using a dual-drive LiNbO3 Mach-Zehnder modulator up to 90 Gb/s. These results indicate that the FDC has the potential to realize high-speed and functional ICs for over-80-Gb/s transmission systems.

We have developed two modulator driver ICs that are based on the functional distributed circuit (FDC) topology for over 40-Gb/s optical transmission systems using InP HBT technology. The FDC topology enables both a wide bandwidth amplifier and high-speed digital functions. The none-return-to-zero (NRZ) driver IC, which is integrated with a D-type flip-flop, exhibits 2.6-Vp-p (differential output: 5.2 Vp-p) output-voltage swings with a high signal quality at 43 and 50 Gb/s. The return-to-zero (RZ) driver IC, which is integrated with a NRZ to RZ converter, produces 2.4-Vp-p (differential output: 4.8 Vp-p) output-voltage swings and excellent eye openings at 43 and 50 Gb/s. Furthermore, we conducted electro-optical modulation experiments using the developed modulator driver ICs and a dual drive LiNbO3 Mach-Zehnder modulator. We were able to obtain NRZ and RZ clear optical eye openings with low jitters and sufficient extinction ratios of more than 12 dB, at 43 and 50 Gb/s. These results indicate that the FDC has the potential to achieve a large output voltage and create high-speed functional ICs for over-40-Gb/s transmission systems.