Network traffic forecasts, as it is well known, can be useful for network resource optimization. In order to minimize the forecast error by maximizing information utilization with low complexity, this paper concerns the difference of traffic trends at large time scales and fits a dual-related model to predict it. First, by analyzing traffic trends based on user behavior, we find both hour-to-hour and day-to-day patterns, which means that models based on either of the single trends are unable to offer precise predictions. Then, a prediction method with the consideration of both daily and hourly traffic patterns, called the dual-related forecasting method, is proposed. Finally, the correlation for traffic data is analyzed based on model parameters. Simulation results demonstrate the proposed model is more effective in reducing forecasting error than other models.

A novel 3D RRAM concept using a stackable multi-layer 1TXR memory cell structure is proposed. The access transistor is fabricated in silicon, which has excellent affinity to the standard CMOS process. Using an 8-layer metal of stacked 1TXR (X=64) as an example, the density is over 260% higher than that of the conventional single layer 1T1R structure. Further, a corresponding operation algorithm is put forward, which can inhibit effectively mis-write and mis-read caused by sneaking current and reduce power consumption.

In a fixed-channel-allocation (FCA) cellular network, a fixed number of channels are assigned to each cell. However, under this scheme, the channel usage may not be efficient because of the variability in the offered traffic. Different approaches such as channel borrowing (CB) and dynamic channel allocation (DCA) have been proposed to accommodate variable traffic. Our work expands on the CB scheme and proposes a new channel-allocation scheme--called mobile-assisted connection-admission (MACA) algorithm--to achieve load balancing in a cellular network, so as to assure network communication. In this scheme, some special channels are used to directly connect mobile units from different cells; thus, a mobile unit, which is unable to connect to its own base station because it is in a heavily-loaded "hot" cell, may be able to get connected to its neighboring lightly-loaded cold cell's base station through a two-hop link. Research results show that MACA can greatly improve the performance of a cellular network by reducing blocking probabilities.

The dynamic routing and wavelength assignment (RWA) problem in wavelength division multiplexing (WDM) optical networks with sparse wavelength conversion has been a hot research topic in recent years. An optimized algorithm based on a multiple-layered interconnected graphic model (MIG) for the dynamic RWA is presented in this paper. The MIG is constructed to reflect the actual WDM network topology. Based on the MIG, the link cost is given by the conditions of available lightpath to calculate an initial solution set of optimal paths, and by combination with path length, the optimized solution using objective function is determined. This approach simultaneously solves the route selection and wavelength assignment problem. Simulation results demonstrate the proposed MIG-based algorithm is effective in reducing blocking probability and boosting wavelength resource utilization compared with other RWA methods.

The quality of an architectural design of a software system has a great influence on achieving non-functional requirements to the system, so formal evaluation and validation techniques to designed architectures are necessary in the early phase of development processes. In this paper, we present a technique for describing software architectures formally based on Coloured Petri Nets (CPNs) and a technique for reusing architectural constituents. Architectural descriptions are essentially written with a CPN language, so that the evaluation and analysis on the architectural descriptions can be made in architectural design phrase. We extract reusable architectural parts from standard architecture styles and architectural patterns so that a designer can construct an architecture by only retrieving the parts and combine them. We also designed the language for describing the combination of the architectural parts. To show the effectiveness of our techniques, we illustrate how a blackboard architecture can be composed of reusable parts and be simulated on a CPN tool (Design/CPN).

Heterogeneous Small Cell Network (HSCN) will have wide application given its ability to improve system capacity and hot spot coverage. In order to increase the efficiency of spectrum and energy, a great deal of research has been carried out on radio resource management in HSCN. However, it is a remarkable fact that the user experience in terms of traffic rate demands has been neglected in existing research with excessive concentration on network capacity and energy efficiency. In this paper, we redefined the energy efficiency (EE) and formulate the joint optimization problem of user experience and energy efficiency maximization into a mixed integer non-linear programming (MINLP) problem. After reformulating the optimization problem, the joint subchannel (SC) allocation and power control algorithm is proposed with the help of cluster method and genetic algorithm. Simulation results show that the joint SC allocation and power control algorithm proposed has better performance in terms of user experience and energy consumption than existing algorithms.

Deploying low power nodes (LPNs), which reuse the spectrum licensed to a macrocell network, is considered to be a promising way to significantly boost network capacity. Due to the spectrum-sharing, the deployment of LPNs could trigger the severe problem of interference including intra-tier interference among dense LPNs and inter-tier interference between LPNs and the macro base station (MBS), which influences the system performance strongly. In this paper, we investigate a spectrum-sharing approach in the downlink for two-tier networks, which consists of small cells (SCs) with several LPNs and a macrocell with a MBS, aiming to mitigate the interference and improve the capacity of SCs. The spectrum-sharing approach is described as a multi-objective optimization problem. The problem is solved by the nondominated sorting genetic algorithm version II (NSGA-II), and the simulations show that the proposed spectrum-sharing approach is superior to the existing one.

Security, flexibility, and scalability are critical to the success of wireless communications. Wireless networks with movable base stations combine the advantages of mobile ad hoc networks and wireless LAN to achieve these goals. Hierarchical mobile wireless network (HMWN) is proposed for supporting movable base stations. In such a system, mobile hosts are organized into hierarchical groups. The group agents serve as a distributed trust entity. A secure packet forwarding algorithm and an authentication and key exchange protocol are developed to protect the network infrastructure. A roaming support mechanism and the associated mutual authentication protocol are proposed to secure the foreign group and the mobile host when it roams within the network. The computation overhead of secure packet forwarding and roaming support algorithms is studied via experiments. The results demonstrate that these two security mechanisms only require, respectively, less than 2% and 0.2% to 5% CPU time in a low-end 700 MHz PC.

For high definition (HD) videos, the 3D-High Efficiency Video Coding (3D-HEVC) reference algorithm incurs dramatically highly computation loads. Therefore, with the demands for the real-time processing of HD video, a hardware implementation is necessary. In this paper, a reconfigurable architecture is proposed that can support both median filtering preprocessing and mean filtering preprocessing to satisfy different scene depth maps. The architecture sends different instructions to the corresponding processing elements according to different scenarios. Mean filter is used to process near-range images, and median filter is used to process long-range images. The simulation results show that the designed architecture achieves an averaged PSNR of 34.55dB for the tested images. The hardware design for the proposed virtual view synthesis system operates at a maximum clock frequency of 160MHz on the BEE4 platform which is equipped with four Virtex-6 FF1759 LX550T Field-Programmable Gate Array (FPGA) for outputting 720p (1024×768) video at 124fps.