A reconfigurable broadband linear power amplifier (PA) for long-range WLAN applications fabricated in a 180nm RF CMOS process is presented here. The proposed reconfigurable in/output matching network provides the PA with broadband capability at the two center frequencies of 0.5GHz and 0.85GHz. The output matching network is realized by a switchable transformer which shows maximum peak passive efficiencies of 65.03% and 73.45% at 0.45GHz and 0.725GHz, respectively. With continuous wave sources, a 1-dB bandwidth (BW1-dB) according to saturated output power is 0.4-1.2GHz, where it shows a minimum output power with a power added efficiency (PAE) of 25.62dBm at 19.65%. Using an adaptive power cell configuration at the common gate transistor, the measured PA under LTE 16-QAM 20MHz (40MHz) signals shows an average output power with a PAE exceeding 20.22 (20.15) dBm with 7.42 (7.35)% at an ACLRE-UTRA of -30dBc, within the BW1-dB.

IEEE 802.11ah is a specification being developed for sub-1GHz license-exempt operation and is intended to provide Low Power Wide Area (LPWA) communication services and support Internet of Things (IoT) features such as large-scale networks and extended transmission range. However, these features also make the 802.11ah networks highly susceptible to channel contention and hidden node problem (HNP). To address the problems, the 11ah Task Group proposed a Restricted Access Window (RAW) mechanism. It shows outstanding performance in alleviating channel contention, but its effect on solving HNP is unsatisfactory. In this paper, we propose a simple and effective hidden node grouping algorithm (HNGA) based on IEEE 802.11ah RAW. The algorithm collects hidden node information by taking advantage of the 802.11 association process and then performs two-stage uniform grouping to prevent hidden node collisions (HNCs). Performance of the proposed algorithm is evaluated in comparison with other existing schemes in a hidden node situation. The results show that our proposed algorithm eliminates most of hidden node pairs inside a RAW group with low overhead penalty, thereby improving the performance of the network. Moreover, the algorithm is immune to HNCs caused by cross slot boundary transmissions.

IEEE 802.11ah is a new wireless standard for large-scale wireless connectivity in IoT and M2M applications. One of the major requirements placed on IEEE 802.11ah is the energy-efficient communication of several thousand stations with a single access point. This is especially difficult to achieve during network initialization, because the several thousand stations must rely on the rudimentary approach of random channel access, and the inevitable increase in channel access contention yields a long association delay. IEEE 802.11ah has introduced an authentication control mechanism that classifies stations into groups, and only a small number of stations in a group are allowed to access the medium at a time. Although the grouping strategy provides fair channel access to a large number of stations, the presence of several thousand stations and limitation that only a group can use the channel at a time, causes the association time to remain excessive. In this paper, we propose a novel block association method that enables simultaneous association of all groups. Our experiments verify that our block association method decreases the total association time by many folds.

IEEE 802.11ah is an emerging wireless LAN standard in the sub-1-GHz license-exempt bands for cost-effective and range-extended communication. One of the most challenging issues that need to be overcome in relation to IEEE 802.11ah is to ensure that thousands of stations are able to associate efficiently with a single access point. During network initialization, several thousand stations try to associate with the access point, leading to heavy channel contention and long association delay. Therefore, IEEE 802.11ah has introduced an authentication control mechanism that classifies stations into groups and only a small number of stations in a group are allowed to access the medium in a beacon interval. This grouping strategy provides fair channel access to a large number of stations. However, the approach to grouping the stations and determining the best group size is undefined in the draft of IEEE 802.11ah. In this paper, we first model the authentication/association in IEEE 802.11ah. Our analysis shows that there exists the best group size that results in minimal association delay. Consequently, the analytical model is extended to determine the best group size. Finally, an enhanced authentication control algorithm, which utilizes the best group size to provide the minimum association delay, is proposed. The numerical and the simulation results we obtained with the proposed method demonstrate that our method succeeds in minimizing the association delay.

As a promising wireless access standard for machine-to-machine (M2M) networks, the IEEE 802.11 task group ah has been discussing a new standard which is based on the wireless local area network (WLAN) standard. This new standard will support an enormous number of stations (STAs) such as 6,000 STAs. To mitigate degradation of the throughput and delay performance in WLANs that employ a carrier sense multiple access with collision avoidance (CSMA/CA) protocol, this paper proposes a virtual grouping method which exploits the random arbitration interframe space number scheme. This method complies with the CSMA/CA protocol, which employs distributed medium access control. Moreover, power saving is another important issue for M2M networks, where most STAs are operated by primary or secondary batteries. This paper proposes a new power saving method for the IEEE 802.11ah based M2M network employing the proposed virtual grouping method. With the proposed virtual grouping and power saving methods, the STAs can save their power by as much as 90% and maintain good throughput and delay performance.