This paper proposes the design of a driver to deal with a thin-disc central supporting structure ultrasonic actuator based on the vibration modes and the equivalent circuit. In order to gain the electromechanical match at resonant frequency, a spectrum analyzer should measure admittance for driving piezoelectric ceramics. The virtual analyzer also investigated the characteristics of a MODEL-E equivalent circuit based upon the admittance-frequency response. The inherent capacitance from an ultrasonic actuator became the partial component in the design of a resonant circuit. IsSpice software is introduced to simulate as well as the experimental results has demonstrated a high agreement related to the conceptual design and practical implementation for the driving circuit.

With the widespread use of Internet applications such as Teleconference, Pay-TV, Collaborate tasks, and Message services, how to construct and distribute the group session key to all group members securely is becoming and more important. Instead of adopting the point-to-point packet delivery, these emerging applications are based upon the mechanism of multicast communication, which allows the group member to communicate with multi-party efficiently. There are two main issues in the mechanism of multicast communication: Key Distribution and Scalability. The first issue is how to distribute the group session key to all group members securely. The second one is how to maintain the high performance in large network groups. Group members in conventional multicast systems have to keep numerous secret keys in databases, which makes it very inconvenient for them. Furthermore, in case that a member joins or leaves the communication group, many involved participants have to change their own secret keys to preserve the forward secrecy and the backward secrecy. We consequently propose a novel version for providing secure multicast communication in large network groups. Our proposed framework not only preserves the forward secrecy and the backward secrecy but also possesses better performance than existing alternatives. Specifically, simulation results demonstrate that our scheme is suitable for high-mobility environments.

We show that simultaneous perturbation can be used as an algorithm for on-line learning, and we report our theoretical investigation on generalization performance obtained with a statistical mechanical method. Asymptotic behavior of generalization error using this algorithm is on the order of t to the minus one-third power, where t is the learning time or the number of learning examples. This order is the same as that using well-known perceptron learning.

A critical problem after a natural/manmade disaster is to provide immediate post-disaster communication links between the disaster victims and some overlay networks. This paper proposes a novel scheme that uses the surviving Mobile handSets (MS) as sensing nodes to form an auto-configured Hierarchical Cognitive Radio Network (H-CRN). The implementation of this H-CRN is explained through detailed problem scenario statement and step-by-step implementation of automatic identification of emergency situation by the MS nodes. An overview of the cross-layer framework used by the MS nodes is also presented. This novel scheme is tested through some hypothesis along with probability calculations for successful identification of emergency situation, formation of ad hoc group and Emergency Beacon Message (EBM) transmission.

The situations where several population parameters need to be estimated simultaneously arise frequently in wide areas of applications, including reliability modeling, survival analysis and biological study. In this paper, we propose Bayesian methods of estimation of the ordered parameters of the two exponential populations, which incorporate the prior information about the simple order restriction, but sometimes breaks the order restriction. A simulation study shows that the proposed estimators are more efficient (in terms of mean square errors) than the isotonic regression of the maximum likelihood estimators with equal weights. An illustrative example is finally presented.

We present our recent work on monolithically integrated devices comprising a variety of functional elements such as high speed optical transmitters and receivers, electro-absorption modulators integrated with tunable dispersion compensators and fast-tunable wavelength converters.

In this paper, we solve the call admission control (CAC) and routing problem in an integrated network that handles several classes of calls of different values and with different resource requirements. The problem of maximizing the average reward (or cost) of admitted calls per unit time is naturally formulated as a semi-Markov Decision Process (SMDP) problem, but is too complex to allow for an exact solution. Thus in this paper, a policy gradient algorithm, together with a decomposition approach, is proposed to find the dynamic (state-dependent) optimal CAC and routing policy among a parameterized policy space. To implement that gradient algorithm, we approximate the gradient of the average reward. Then, we present a simulation-based algorithm to estimate the approximate gradient of the average reward (called GSMDP algorithm), using only a single sample path of the underlying Markov chain for the SMDP of CAC and routing problem. The algorithm enhances performance in terms of convergence speed, rejection probability, robustness to the changing arrival statistics and an overall received average revenue. The experimental simulations will compare our method's performance with other existing methods and show the robustness of our method.

We propose a new modulation, phase-silence-shift-keying (PSSK), whose symbol error rate (SER) performance is improved by 6 dB compared with phase-shift-keying (PSK). To prove this, theoretical analysis of probability of error is provided and simulation results are presented.

We describe the applicability of photonic crystal fiber (PCF) with an enlarged effective area Aeff to a distributed Raman amplification (DRA) transmission. We investigate the DRA transmission performance numerically over a large Aeff PCF taking account of the signal-to-noise ratio (SNR) improvement RSNR in the S, C, and L bands. We show that an RSNR of 3 dB can be expected by utilizing DRA with a maximum pump power of 500 mW when the Aeff of the PCF is 230 µm2.

Ball Grid Array packages in which I/O pins are arranged in a grid array pattern realize a number of connections between chips and a printed circuit board, but it takes much time in manual routing. We propose a fast routing method for 2-layer Ball Grid Array packages that iteratively modifies via assignment. In experiments, in most cases, via assignment and global routing on both of layers in which all nets are realized and the violation of wire congestion on layer 1 is small are speedily obtained.

An inductive buffer peaking technique is proposed and demonstrated to extend the bandwidth of a 10-Gbit/s transimpedance amplifier (TIA) for optical communications. A TIA using this peaking technique is fabricated based on InGaP/GaAs HBT technology. The advantage of the proposed technique is verified by comparisons based on simulations and experiments. For these comparisons, three different types of TIAs using a basic gain stage, a shunt peaking gain stage and the proposed gain stage, respectively, are fabricated and measured. The measured performance of the proposed TIA shows that this bandwidth extension technique using inductive buffer peaking can be applied to circuit designs which demand wideband frequency response with low power consumption.

In this paper, we introduce a unified framework based on a canonical decision diagram called Horner Expansion Diagram (HED) [1] for the purpose of equivalence checking of datapath oriented hardware designs in various design stages from an algorithmic description to the gate-level implementation. The HED is not only able to represent and manipulate algorithmic specifications in terms of polynomial expressions with modulo equivalence but also express bit level adder (BLA) description of gate-level implementations. Our HED can support modular arithmetic operations over integer rings of the form Z2n. The proposed techniques have successfully been applied to equivalence checking on industrial benchmarks. The experimental results on different applications have shown the significant advantages over existing bit-level and also word-level equivalence checking techniques.

Mobile positioning using Received Signal Strength (RSS) measurements is regarded as a low cost solution which is applicable in a wide range of wireless networks. In this paper, we propose a cooperative RSS-based positioning algorithm, that relies on the promising idea of mobile to mobile communications in the next generation of cellular networks. Simulations performed in this paper indicate that utilizing the additional RSS data of the short range communications between Mobile Stations (MS's), enhances the accuracy of the traditional RSS-based positioning algorithms.

This letter investigates a subchannel and power allocation (SPA) algorithm which maximizes the throughput of a user under the constraints of total transmit power and fair subchannel occupation among relay nodes. The proposed algorithm reduces computational complexity from exponential to linear in the number of subchannels at the expense of a small performance loss.

In direct communication, terminals that are close to each other can communicate directly without traffic going through centralized controller such as a base station (BS). This brings several advantages. We study direct communication with localized distribution, so that users tend to gather around some areas (clusters/hot-spots) within the cell such as buildings. Previous analysis about clustering has focused on one dimensional scenarios. Here we present theoretical analysis of direct communication with two dimensional clustering. Additional analysis is presented for direct communication with correlated clusters. With correlated clusters some pairs of source and destination clusters are more probable than other pairs. According to our best knowledge, this is the first time that theoretical analysis is presented about clustering and correlated clusters in two dimensional scenarios. Simulations confirm the validity of the analysis. In addition to the exact results, we also suggest using the point-based approximation to rapidly and easily obtain results. The numerical results show that the gains from direct communication, in terms of blocking probability and carried traffic, depend on the offered traffic. Additionally, correlation in cluster selection is shown to significantly improve performance. Point-based approximation is shown to be very useful when the number of clusters is large.

A simple exact error rate analysis is presented for random binary direct sequence code division multiple access (DS-CDMA) considering a general pulse shape and flat Nakagami fading channel. First of all, a simple model is developed for the multiple access interference (MAI). Based on this, a simple exact expression of the characteristic function (CF) of MAI is developed in a straight forward manner. Finally, an exact expression of error rate is obtained following the CF method of error rate analysis. The exact error rate so obtained can be much easily evaluated as compared to the only reliable approximate error rate expression currently available, which is based on the Improved Gaussian Approximation (IGA).

This paper proposes efficient single-carrier (SC) based multiplexing schemes for Layer 1 (L1)/Layer 2 (L2) control signals in SC-FDMA radio access using DFT-Spread OFDM in the Evolved UTRA uplink. L1/L2 control signals are necessary for key packet access techniques such as downlink scheduling, link adaptation, hybrid automatic repeat request (ARQ) with soft combining, and for uplink feedback control signals. We first propose a SC-based multiplexing scheme for L1/L2 control signals within a shared data channel for a set of user equipment (UE) that transmits both an uplink shared data channel and L1/L2 control signals within the same subframe. We also propose a multiplexing scheme for L1/L2 control signals without uplink data transmission that takes advantage of intra-subframe frequency hopping (FH) using multiple exclusively-assigned time-frequency resource blocks (RBs) to obtain a frequency diversity gain. Furthermore, we propose an orthogonal CDMA-based multiplexing scheme using cyclic shifts of a constant amplitude zero auto-correlation (CAZAC) sequence for L1/L2 control signals from different UEs within the same narrowband time-frequency RB. Computer simulation results show that the proposed SC-based multiplexing scheme for the L1/L2 control signals within the shared data channel achieves a higher user throughput than a multicarrier-based multiplexing scheme. The results also show that the proposed multiplexing scheme for the L1/L2 control signals that takes advantage of the intra-subframe FH for the UE without uplink data transmission achieves high quality reception through large frequency diversity gain. Furthermore, we show that the proposed cyclic-shift based orthogonal CDMA multiplexing is effective in the multiplexing of multiple L1/L2 control signals from different UEs within the same RB.

Quantum random access coding (QRAC) is one of the basic tools in quantum computing. It uses a quantum state for encoding the sender's bit string so that the receiver can recover any single bit of the bit string with high probability. This article surveys recent developments of QRAC, with some concrete examples of QRAC using one quantum bit, and its applications, focusing on communication complexity and locally decodable codes.

Interconnection networks play a crucial role in the performance of massively parallel computers. Hierarchical interconnection networks provide high performance at low cost by exploring the locality that exists in the communication patterns of massively parallel computers. A Tori connected Torus Network (TTN) is a 2D-torus network of multiple basic modules, in which the basic modules are 2D-torus networks that are hierarchically interconnected for higher-level networks. This paper addresses the architectural details of the TTN and explores aspects such as node degree, network diameter, cost, average distance, arc connectivity, bisection width, and wiring complexity. We also present a deadlock-free routing algorithm for the TTN using four virtual channels and evaluate the network's dynamic communication performance using the proposed routing algorithm under uniform and various non-uniform traffic patterns. We evaluate the dynamic communication performance of TTN, TESH, MH3DT, mesh, and torus networks by computer simulation. It is shown that the TTN possesses several attractive features, including constant node degree, small diameter, low cost, small average distance, moderate (neither too low, nor too high) bisection width, and high throughput and very low zero load latency, which provide better dynamic communication performance than that of other conventional and hierarchical networks.

This paper proposes joint maximum a posteriori (MAP) detection and spatial filtering for MIMO-OFDM mobile communications; it offers excellent receiver performance even over interference-limited channels. The proposed joint processor consists of a log likelihood generator and a MAP equalizer. The log likelihood generator suppresses cochannel interference by spatially filtering received signals and provides branch metrics of transmitted signal candidates. Using the branch metrics, the MAP equalizer generates log likelihood ratios of coded bits and performs channel decoding based on the MAP criterion. In the first stage, the log likelihood generator performs spatio-temporal filtering (STF) of the received signals prior to the fast Fourier transform (FFT) and is referred to as preFFT-type STF. Estimation of parameters including tap coefficients of the spatio-temporal filters and equivalent channel impulse responses of desired signals is based on the eigenvalue decomposition of an autocorrelation matrix of both the received and transmitted signals. For further improvement, in the second stage, the generator performs spatial filtering (SF) of the FFT output and is referred to as postFFT-type SF. Estimation of both tap coefficients of the spatial filters and channel impulse responses employs the recursive least squares (RLS) with smoothing. The reason for switching from preFFT-type STF into postFFT-type SF is that preFFT-type STF outperforms postFFT-type SF with a limited number of preamble symbols while postFFT-type SF outperforms preFFT-type STF when data symbols can be reliably detected and used for the parameter estimation. Note that there are two major differences between the proposed and conventional schemes: one is that the proposed scheme performs the two-stage processing of preFFT-type STF and postFFT-type SF, while the other is that the smoothing algorithm is applied to the parameter estimation of the proposed scheme. Computer simulations demonstrate that the proposed scheme can achieve excellent PER performance under interference-limited channel conditions and that it can outperform the conventional joint processing of preFFT-type STF and the MAP equalizer.