For high transmission efficiency, good modulation schemes are expected. This paper focuses on the enhancement of the modulation scheme of free space optical turbo coded system. A free space optical turbo coded system using a new signaling scheme called hybrid PPM-OOK signaling (HPOS) is proposed and investigated. The theoretical formula of the bit error rate of the uncoded HPOS system is derived. The effective information rate performances (i.e. channel capacity) of the proposed HPOS turbo coded system are evaluated through computer simulation in free space optical channel, with weak, moderate, strong scintillation. The performance of the proposed HPOS turbo coded system is compared with those of the conventional OOK (On-Off Keying) turbo coded system and BPPM (Binary Pulse Position Modulation) turbo coded system. As results, the proposed HPOS turbo coded system shows the same tolerance capability to background noise and atmospheric turbulence as the conventional BPPM turbo coded system, and it has 1.5 times larger capacity.

In this paper, the low density generator matrix (LDGM) coded scheme with unequal transmission power allocation (UTPA) in optical wireless channel is evaluated by computer simulation. In particular, the bit error rate performance of the LDGM-coded binary pulse position modulation (LDGM-BPPM) with the UTPA scheme is investigated in the presence of avalanche photo diode (APD) noise, scintillation and background noise. Consequently, the BER performance of the LDGM-BPPM with UTPA is better than that of the conventional LDGM-BPPM. It is found that there is the optimum power ratio (R). The optimum R varies with scintillation and background noise. For example, when the average received laser power is -47[dBm], the variance of scintillation is 0.1, and background noise is -45[dBm], the optimum R is 3.1. Thus, the LDGM-BPPM with the UTPA scheme is superior to the conventional LDGM-BPPM system.

The convergence behavior of turbo APPM (TAPPM) decoding is analyzed by using a three-dimensional extrinsic information transfer (EXIT) chart and the decoding trajectory. The signal-to-noise ratio (SNR) threshold, below which iterative decoding fails to converge, is predicted by using the 3-D EXIT chart analysis. Bit error rate performances of TAPPM schemes validate the EXIT-chart-based SNR threshold predictions. Outer constituent codes of TAPPM are chosen to show the lowest SNR threshold with the aid of EXIT chart analysis.

In this paper, we study the capacity and performance of nonorthogonal pulse position modulation (NPPM) for Ultra-Wideband (UWB) communication systems over both AWGN and IEEE802.15.3a channels. The channel capacity of NPPM is determined for a time-hopping multiple access UWB communication system. The error probability and performance bounds are derived for a multiuser environment. It is shown that with proper selection of the pulse waveform and modulation index, NPPM can achieve a higher capacity than orthogonal PPM, and also provide better performance than orthogonal PPM with the same throughput.

We propose a selective detection scheme based on pulse repetition considering both BER (Bit Error Rate) performance and complexity in coherent UWB (Ultra Wide Band) systems. To take system complexity into account, the proposed scheme transmits the UWB signals by pulse repetition at the transmitter, like conventional PRC (Pulse Repetition Coding). However, to effectively improve BER performance of the system, the proposed scheme performs selective detection by estimating the SNR (Signal-to-Noise Ratio) of the received pulse-repeated signal at the UWB receiver.

In order to effectively improve the BER (Bit Error Rate) performance of noncoherent IR-UWB (Impulse Radio Ultra Wide Band) systems utilizing 2PPM (Binary Pulse Position Modulation), we propose a selective signal combining scheme which performs selective combination of received signals by estimating the SNR (Signal-to-Noise Ratio) of the energies during the pulse width interval.

Data compression is popularly applied to computer systems and communication systems in order to reduce storage size and communication time, respectively. Since large data are used frequently, string matching for such data takes a long time. If the data are compressed, the time gets much longer because decompression is necessary. Long string matching time makes computer virus scan time longer and gives serious influence to the security of data. From this, CPM (Compression Pattern Matching) methods for several compression methods have been proposed. This paper proposes CPM method for PPM which achieves fast virus scan and improves dependability of the compressed data, where PPM is based on a Markov model, uses a context information, and achieves a better compression ratio than BW transform and Ziv-Lempel coding. The proposed method encodes the context information, which is generated in the compression process, and appends the encoded data at the beginning of the compressed data as a header. The proposed method uses only the header information. Computer simulation says that augmentation of the compression ratio is less than 5 percent if the order of the PPM is less than 5 and the source file size is more than 1 M bytes, where order is the maximum length of the context used in PPM compression. String matching time is independent of the source file size and is very short, less than 0.3 micro seconds in the PC used for the simulation.

This paper presents an analysis of the effects of RF filter characteristics on the system performance of an impulse radio. The impulse radio system transmits modulated pulses having very short time duration. Information can be extracted in the receiver side based on the cross-correlation between received and reference pulses. Accordingly, the pulse distortion due to in-band group delay variation can cause serious degradation in system performance. In general, RF band pass filters inevitably cause non-uniform group delays to the signal passing through the filter that are proportional to its skirt characteristic due to its resonance phenomenon. In this work, a small signal scattering parameter, S21, which is a frequency domain parameter, and its Fourier transform are utilized to characterize the output pulse waveform under the condition that the input and output ports are matched. The output pulse waveform of the filter is predicted based on the convolution integral between the input pulse and filter transfer function, and the analysis result is compared with previously reported experimental result. The resulting bit error rate performances in a bi-phase modulation and a pulse position modulation based impulse radio system are also calculated. Moreover, improvement of system performance by the pulse shaping method, a potential solution for pulse waveform distortion, is analyzed.

The transmit power of Ultra Wideband (UWB) is limited in short range communications to avoid the interference with existing narrow-band communication systems. Since this limits UWB communication range, this paper proposes a novel relay scheme that uses shared frequency repeaters for impulse UWB signal relay to improve system range. After considering possible problems with the repeater, in particular the coupling interference between the input and output and relay-delay, a switching control method is proposed that offers short relay-delay and suppresses the coupling interference at the repeaters. With respect to the proposed relay scheme, Pulse-Position-Modulation (PPM) UWB-based signal relay is evaluated by analyzing its BER performance using the point-to-point transmission link model.

In this paper, we apply iterative detection to typical time hopping (TH) pulse position modulation (PPM) ultra wideband (UWB) spread spectrum systems. Unlike a typical TH-PPM UWB which employs repetition code, the proposed system uses self-encoded code which is updated by user information itself. To take advantage of self-encoded spread spectrum, we apply iterative detection to the TH-PPM UWB system. Simulations are conducted to investigate the bit error rate (BER) performance of the proposed system in additive white gaussian noise (AWGN) channels as well as in fading and multipath channels. We observe a significant BER performance improvement over conventional TH-PPM UWB systems.

We have developed a new modulation method--inverted pulse position modulation (I-PPM) and subcarrier inverted pulse position modulation (SC-I-PPM)--that provides superior LED brightness for visible-light communications. In addition, the new modulation method SC-I-PPM is not affected by background light. In this paper, we investigated several modulation methods in details and set up a standard with which to evaluate the performance of modulation methods. Several modulation methods are subjected to experiments to clarify their performance. Experiments show that subcarrier modulation suppresses the influence of background light and that our new modulation best maintains LED brightest.

In this paper, three new ultra wideband (UWB) communication systems with quadrature-phase shift keying (QPSK) impulse modulation are proposed. First, direct-sequence (DS) multiple-access scheme is applied. The second proposed system is based on time-hopping (TH) multiple-access scheme. The last proposed system applies TH multiple-access scheme with QPSK impulse modulation and pulse position modulation (PPM). The conventional UWB communications as TH scheme with PPM modulation and DS scheme with binary-phase shift keying (BPSK) are used to compare. The simulation results show that all proposed UWB communication systems can provide obviously better performances compared with the conventional TH-PPM and DS-BPSK UWB communication systems. The comparisons in aspects of transmission bit rate and the number of users are also investigated.

This paper presents a new transmission scheme of M-ary biorthogonal pulse position modulation (BPPM) in ultra wideband systems. The proposed scheme incorporates position-wise parity information to improve the probability of symbol detection over multipath channels. A linear filter-based channel modification is also introduced to mitigate multipath degradation and maximize the probability of symbol detection by using parity information. The analytical and numerical results show that the proposed scheme achieves a significant improvement of symbol error rate (SER) with very low computational complexity and no symbol delay.

This study proposes a feasible method to successfully improve probabilistic packet marking (PPM) used to trace back the original DoS attacker. PPM is modified by compensating for the remarked marked packets to achieve the optimal marked packets required for reconstructing the complete attack path.

This paper proposes and theoretically evaluates two different schemes of code acquisition for pulse-position modulation (PPM) and overlapping PPM (OPPM) fiber-optic code-division multiple-access (CDMA) systems, namely threshold-based and demodulator-based code acquisition. Single-dwell detector and serial-search algorithm are employed for both schemes. Theoretical analysis is carried out for shot-noise-limited photon-counting receiver. Discussions upon effects of various parameter settings on the performance of code acquisition for PPM/OPPM fiber-optic CDMA systems, such as index of overlap, PPM/OPPM multiplicity, average photon counts per information nat, and darkcurrents, are presented. It is shown that when the threshold is properly selected, the threshold-based code acquisition system offers better performance, in terms of mean number of training frames, than the demodulator-based one.

We propose an improved probabilistic packet marking approach for IP traceback to reconstruct a more precise attack path in an incomplete PPM deployment environment. Moreover, this scheme may also be used with a view to reducing the deployment overhead without requiring the participation of all routers along the attack path.

Cutoff rate of m-ary PPM is derived for an avalanche photodiode (APD) based receiver. The cutoff rate is compared among m=8-256 under the condition of the same total signal energy in 256 slots, where the effects of the timing jitter and atmospheric turbulence are included. Numerical results are shown for the illustrative examples of the cutoff rate.

This paper proposes a nonlinear oscillator network model for gray-level image segmentation suitable for massively parallel VLSI implementation. The model performs image segmentation in parallel using nonlinear analog dynamics. Because of the limited calculation precision in VLSI implementation, it is important to estimate the calculation precision required for proper operation. By numerical simulation, the necessary precision is estimated to be 5 bits. We propose a nonlinear oscillator network circuit using the pulse modulation approach suitable for an analog-digital merged circuit architecture. The basic operations of the nonlinear oscillator circuit and the connection weight circuit are confirmed by SPICE circuit simulation. The circuit simulation results also demonstrate that image segmentation can be performed within the order of 100 µs.

We have two goals in this paper. One is the comparison of Spread Spectrum (SS) CDMA and Spread Time (ST) CDMA. The other is to propose a new SS-ST CDMA system, which is an adaptive CDMA with both merits of SS and ST CDMA. SS and ST CDMA are compared from the view point of two dimensional space "frequency (B Hz)-time (T Sec)" together with their communication capacity. A primary modulation is assumed to be PPM in ST CDMA, and FSK in SS CDMA which is regarded as PPM in frequency axis. Both SS and ST CDMA are combined to give the proposed SS-ST CDMA, where transmitted signals are spread both in time and frequency domain. In order to realize the proposed system, a transmitter model is presented, and two receiver structures are discussed. The discrete Fourier transform (DFT) is employed for the system flexibility. Although SS, ST and SS-ST CDMA are shown to have the same capacity of 0.7213, the combined SS-ST CDMA has a merit of adaptability to adjust spreading gain of ST and SS according to property of channels, an impulsive noise dominated or a CW interference dominated channel. Numerical results of DFT are also shown to illustrate the waveform and spectrum of the proposed SS-ST CDMA system. Finally the symbol error probability performance of ST PPM, SS FSK and combined SS-ST systems in CW and impulsive environment is presented.

We propose an optical spread-time code-division multiple-access (ST-CDMA) with pulse position modulation (PPM) signaling for high-speed communication networks. We obtain a union upper bound on the bit error rate (BER) considering the multi-access interference (MAI), shot noise and thermal noise at the receiver. As a result, we show that the optical ST-CDMA with PPM signaling improves the BER performance at the same received power and bit rate compared to that with OOK signaling. This leads to an increase of the bit rate at the same BER. Moreover, we show that the proposed system can relax the requirement for spectral resolution compared to the optical ST-CDMA with OOK signaling under the received power and bit rate constraints.