Industrial networks need to provide reliable communication services, usually in a redundant transmission (RT) manner. In the past few years, several device-redundancy-based, layer 2 solutions have been proposed. However, with the evolution of industrial networks to the Industrial Internet, these methods can no longer work properly in the non-redundancy, layer 3 environments. In this paper, an SDN-based reliable communication framework is proposed for the Industrial Internet. It can provide reliable communication guarantees for mission-critical applications while servicing non-critical applications in a best-effort transmission manner. Specifically, it first implements an RT-based reliable communication method using the Industrial Internet's link-redundancy feature. Next, it presents a redundant synchronization mechanism to prevent end systems from receiving duplicate data. Finally, to maximize the number of critical flows in it (an NP-hard problem), two ILP-based routing & scheduling algorithms are also put forward. These two algorithms are optimal (Scheduling with Unconstrained Routing, SUR) and suboptimal (Scheduling with Minimum length Routing, SMR). Numerous simulations are conducted to evaluate its effectiveness. The results show that it can provide reliable, duplicate-free services to end systems. Its reliable communication method performs better than the conventional best-effort transmission method in terms of packet delivery success ratio in layer 3 networks. In addition, its scheduling algorithm, SMR, performs well on the experimental topologies (with average quality of 93% when compared to SUR), and the time overhead is acceptable.

OpenFlow is a widely adopted implementation of the Software-Defined Networking (SDN) architecture. Since conventional network monitoring systems are unable to cope with OpenFlow networks, researchers have developed various monitoring systems tailored for OpenFlow networks. However, these existing systems either rely on a specific controller framework or an API, both of which are not part of the OpenFlow specification, and thus limit their applicability. This article proposes a transparent and low-overhead monitoring system for OpenFlow networks, referred to as Opimon. Opimon monitors the network topology, switch statistics, and flow tables in an OpenFlow network and visualizes the result through a web interface in real-time. Opimon monitors a network by interposing a proxy between the controller and switches and intercepting every OpenFlow message exchanged. This design allows Opimon to be compatible with any OpenFlow switch or controller. We tested the functionalities of Opimon on a virtual network built using Mininet and a large-scale international OpenFlow testbed (PRAGMA-ENT). Furthermore, we measured the performance overhead incurred by Opimon and demonstrated that the overhead in terms of latency and throughput was less than 3% and 5%, respectively.

The need of telecommunications operators to reduce Capital and Operational Expenditures in networks which traffic is continuously growing has made them search for new alternatives to simplify and automate their procedures. Because of the different transport network segments and multiple layers, the deployment of end-to-end services is a complex task. Also, because of the multiple vendor existence, the control plane has not been fully homogenized, making end-to-end connectivity services a manual and slow process, and the allocation of computing resources across the entire network a difficult task. The new massive capacity requested by Data Centers and the new 5G connectivity services will urge for a better solution to orchestrate the transport network and the distributed computing resources. This article presents and demonstrates a Network Slicing solution together with an end-to-end service orchestration for transport networks. The Network Slicing solution permits the co-existence of virtual networks (one per service) over the same physical network to ensure the specific service requirements. The network orchestrator allows automated end-to-end services across multi-layer multi-domain network segments making use of the standard Transport API (TAPI) data model for both l0 and l2 layers. Both solutions will allow to keep up with beyond 5G services and the higher and faster demand of network and computing resources.

Large-scale disasters can lead to a severe damage or destruction of optical transport networks including the data-plane (D-plane) and control and management-plane (C/M-plane). In addition to D-plane recovery, quick recovery of the C/M-plane network in modern software-defined networking (SDN)-based fiber optical networks is essential not only for emergency control of surviving optical network resources, but also for quick collection of information related to network damage/survivability to enable the optimal recovery plan to be decided as early as possible. With the advent of the Internet of Things (IoT) technologies, low energy consumption, and low-cost IoT devices have been more common. Corresponding long-distance networking technologies such as low-power wide-area (LPWA) and LPWA-based mesh (LPWA-mesh) networks promise wide coverage sensing and environment data collection capabilities. We are motivated to take an infrastructure-less IoT approach to provide long-distance, low-power and inexpensive wireless connectivity and create an emergency C/M-plane network for early disaster recovery. In this paper, we investigate the feasibility of fiber networks C/M-plane recovery using an IoT-based extremely narrow-band, and lossy links system (FRENLL). For the first time, we demonstrate a field-trial experiment of a long-latency/loss tolerable SDN C/M-plane that can take advantage of widely available IoT resources and easy-to-create wireless mesh networks to enable the timely recovery of the C/M-plane after disaster.

In the coming smart-home era, more and more household electrical appliances are generating more and more sensor data and transmitting them over the home networks, which are often connected to Internet through Point-to-Point Protocol over Ethernet (PPPoE) for desirable authentication and accounting. However, according to our knowledge, high-speed commercial home PPPoE router is still absent for a home network environment. In this paper, we first introduce and evaluate our programmable platform FLARE-DPDK for ease of programming network functions. Then we introduce our effort to build a compact 10Gbps software FLARE PPPoE router on a commercial mini-PC. In our implementation, the control plane is implemented with Linux PPPoE software for authentication-like signaling control. The data plane is implemented over FLARE-DPDK platform, where we get packets from physical network interfaces directly bypassing Linux kernel and distribute packets to multiple CPU cores for data processing in parallel. We verify our software PPPoE router in both lab and production network environment. The experimental results show that our FLARE software PPPoE router can achieve much higher throughput than a commercial PPPoE router tested in a production environment.

Software-defined networking (SDN) technology enables us to flexibly configure switches in a network. Previously, distributed SDN control methods have been discussed to improve their scalability and robustness. Distributed placement of controllers and backing up each other enhance robustness. However, these techniques do not include an emergency measure against large-scale failures such as network separation induced by disasters. In this study, we first propose a network partitioning method to create a robust control plane (C-Plane) against large-scale failures. In our approach, networks are partitioned into multiple sub-networks based on robust topology coefficient (RTC). RTC denotes the probability that nodes in a sub-network isolate from controllers when a large-scale failure occurs. By placing a local controller onto each sub-network, 6%-10% of larger controller-switch connections will be retained after failure as compared to other approaches. Furthermore, we discuss reactive emergency reconstruction of a distributed SDN C-plane. Each node detects a disconnection to its controller. Then, C-plane will be reconstructed by isolated switches and managed by the other substitute controller. Meanwhile, our approach reconstructs C-plane when network connectivity recovers. The main and substitute controllers detect network restoration and merge their C-planes without conflict. Simulation results reveal that our proposed method recovers C-plane logical connectivity with a probability of approximately 90% when failure occurs in 100 node networks. Furthermore, we demonstrate that the convergence time of our reconstruction mechanism is proportional to the network size.

In this paper, we posit that, in future mobile network, network softwarization will be prevalent, and it becomes important to utilize deep machine learning within network to classify mobile traffic into fine grained slices, by identifying application types and devices so that we can apply Quality-of-Service (QoS) control, mobile edge/multi-access computing, and various network function per application and per device. This paper reports our initial attempt to apply deep machine learning for identifying application types from actual mobile network traffic captured from an MVNO, mobile virtual network operator and to design the system for classifying it to application specific slices.

The centralized controller of SDN enables a global topology view of the underlying network. It is possible for the SDN controller to achieve globally optimized resource composition and utilization, including optimized end-to-end paths. Currently, resource composition in SDN arena is usually conducted in an imperative manner where composition logics are explicitly specified in high level programming languages. It requires strong programming and OpenFlow backgrounds. This paper proposes declarative path composition, namely Compass, which offers a human-friendly user interface similar to natural language. Borrowing methodologies from Semantic Web, Compass models and stores SDN resources using OWL and RDF, respectively, to foster the virtualized and unified management of the network resources regardless of the concrete controller platform. Besides, path composition is conducted in a declarative manner where the user merely specifies the composition goal in the SPARQL query language instead of explicitly specifying concrete composition details in programming languages. Composed paths are also reused based on similarity matching, to reduce the chance of time-consuming path composition. The experiment results reflect the applicability of Compass in path composition and reuse.

Named Data Networking (NDN) has emerged as an alternative to traditional IP-based networking for the achievement of Information-Centric Networking (ICN). Currently, most NDN is deployed over IP networks, but such an overlay deployment increases the transport network overhead due to the use of dual network control planes (NDN routing and IP routing). Software-Defined Networking (SDN) can be used to mitigate the network overhead by forwarding NDN packets without the use of IP routing. However, to deploy NDN over SDN, a variable NDN content name needs to be mapped to a fixed-size match field in an OpenFlow switch flow table. For efficient support of such a mapping task, we propose a new architecture that uses dual name for content: content name and Name Tag. The Name Tag is derived from the corresponding content name and is a legitimate IPv6 address. By using the proposed Name Tag, the SDN with an NDN control application can transport an IPv6 packet that encapsulates an NDN packet for an NDN name-based routing. We emulate the proposed architecture using Mininet and verify that it is feasible.

In this paper, we apply the concept of software-defined data plane to defining new services for Mobile Virtual Network Operators (MVNOs). Although there are a large number of MVNOs proliferating all over the world and most of them provide low bandwidth at low price, we propose a new business model for MVNOs and empower them with capability of tailoring fine-grained subscription plans that can meet users' demands. For example, abundant bandwidth can be allocated for some specific applications, while the rest of the applications are limited to low bandwidth. For this purpose, we have recently proposed the concept of application and/or device specific slicing that classifies application and/or device specific traffic into slices and applies fine-grained quality of services (QoS), introducing various applications of our proposed system [9]. This paper reports the prototype implementation of such proposal in the real MVNO connecting customized smartphones so that we can identify applications from the given traffic with 100% accuracy. In addition, we propose a new method of identifying applications from the traffic of unmodified smartphones by machine learning using the training data collected from the customized smartphones. We show that a simple machine learning technique such as random forest achives about 80% of accuracy in applicaton identification.

In this paper, we posit that extension of SDN to support deeply and flexibly programmable, software-defined data plane significantly enhance SDN and NFV and their interaction in terms of (1) enhanced interaction between applications and networks, (2) optimization of network functions, and (3) rapid development of new network protocols. All of these benefits are expected to contribute to improving the quality of diversifying communication networks and services. We identify three major technical challenges for enabling software-defined data plane as (1) ease of programming, (2) reasonable and predictable performance and (3) isolation among multiple concurrent logics. We also promote application-driving thinking towards defining software defined data-plane. We briefly introduce our project FLARE and its related technologies and review four use cases of flexible and deeply programmable data plane.

The use of computing resources on network is becoming active in the Internet and private networks. OpenFlow/Software-Defined Networking (SDN) is drawing attention as a method to control network virtualization for the cloud computing services and other carrier services. This paper introduces examples of OpenFlow/SDN technologies applied to commercial cloud services. Various activities to expand coverage over commercial carrier networks are also mentioned.