Microwave imaging techniques, in particular, synthetic aperture radar (SAR), are promising tools for terrain surface measurement, irrespective of weather conditions. The coherent change detection (CCD) method is being widely applied to detect surface changes by comparing multiple complex SAR images captured from the same scanning orbit. However, in the case of a general damage assessment after a natural disaster such as an earthquake or mudslide, additional about surface change, such as surface height change, is strongly required. Given this background, the current study proposes a novel height change estimation method using a CCD model based on the Pauli decomposition of fully polarimetric SAR images. The notable feature of this method is that it can offer accurate height change beyond the assumed wavelength, by introducing the frequency band-divided approach, and so is significantly better than InSAR based approaches. Experiments in an anechoic chamber on a 1/100 scaled model of the X-band SAR system, show that our proposed method outputs more accurate height change estimates than a similar method that uses single polarimetric data, even if the height change amount is over the assumed wavelength.

In this paper, a new scheme is presented for ground moving target indication for multichannel high-resolution wide-swath (HRWS) SAR systems with modified reconstruction filters. The conventional steering vector is generalized for moving targets through taking into account the additional Doppler centroid shift caused by the across-track velocity. Two modified steering vectors with symmetric velocity information are utilized to produce two images for the same scene. Due to the unmatched steering vectors, the stationary backgrounds are defocused but they still hold the same intensities in both images but moving targets are blurred to different extents. The ambiguous components of the moving targets can also be suppressed due to the beamforming in the reconstruction procedure. Therefore, ground moving target indication can be carried out via intensity comparison between the two images. The effectiveness of the proposed method is verified by both simulated and real airborne SAR data.

Synthetic aperture radar (SAR) imagery is significantly deteriorated by the random phase noises which are generated by the frequency jitter of the transmit signal and atmospheric turbulence. In this paper, we recast the SAR imaging problem via the phase-corrupted data as for a special case of quadratic compressed sensing (QCS). Although the quadratic measurement model has potential to mitigate the effects of the phase noises, it also leads to a nonconvex and quartic optimization problem. In order to overcome these challenges and increase reconstruction robustness to the phase noises, we proposed a QCS-based SAR imaging algorithm by greedy local search to exploit the spatial sparsity of scatterers. Our proposed imaging algorithm can not only avoid the process of precise random phase noise estimation but also acquire a sparse representation of the SAR target with high accuracy from the phase-corrupted data. Experiments are conducted by the synthetic scene and the moving and stationary target recognition Sandia laboratories implementation of cylinders (MSTAR SLICY) target. Simulation results are provided to demonstrate the effectiveness and robustness of our proposed SAR imaging algorithm.

Satellite-borne or aircraft-borne synthetic aperture radar (SAR) is useful for high resolution imaging analysis for terrain surface monitoring or surveillance, particularly in optically harsh environments. For surveillance application, there are various approaches for automatic target recognition (ATR) of SAR images aiming at monitoring unidentified ships or aircraft. In addition, various types of analyses for full polarimetric data have been developed recently because it can provide significant information to identify structure of targets, such as vegetation, urban, sea surface areas. ATR generally consists of two processes, one is target feature extraction including target area determination, and the other is classification. In this paper, we propose novel methods for these two processes that suit full polarimetric exploitation. As the target area extraction method, we introduce a peak signal-to noise ratio (PSNR) based synthesis with full polarimetric SAR images. As the classification method, the circular polarization basis conversion is adopted to improve the robustness especially to variation of target rotation angles. Experiments on a 1/100 scale model of X-band SAR, demonstrate that our proposed method significantly improves the accuracy of target area extraction and classification, even in noisy or target rotating situations.

In this paper, we first propose ten new discrimination features of SAR images in the moving and stationary target acquisition and recognition (MSTAR) database. The Ada_MCBoost algorithm is then proposed to classify multiclass SAR targets. In the new algorithm, we introduce a novel large-margin loss function to design a multiclass classifier directly instead of decomposing the multiclass problem into a set of binary ones through the error-correcting output codes (ECOC) method. Finally, experiments show that the new features are helpful for SAR targets discrimination; the new algorithm had better recognition performance than three other contrast methods.

Microwave imaging techniques, particularly for synthetic aperture radar (SAR), produce high-resolution terrain surface images regardless of the weather conditions. Focusing on a feature of complex SAR images, coherent change detection (CCD) approaches have been developed in recent decades that can detect invisible changes in the same regions by applying phase interferometry to pairs of complex SAR images. On the other hand, various techniques of polarimetric SAR (PolSAR) image analysis have been developed, since fully polarimetric data often include valuable information that cannot be obtained from single polarimetric observations. According to this background, various coherent change detection methods based on fully polarimetric data have been proposed. However, the detection accuracies of these methods often degrade in low signal-to-noise ratio (SNR) situations due to the lower signal levels of cross-polarized components compared with those of co-polarized ones. To overcome the problem mentioned above, this paper proposes a novel CCD method by introducing the Pauli decomposition and the weighting of component with their respective SNR. The experimental data obtained in anechoic chamber show that the proposed method significantly enhances the performance of the receiver operation characteristic (ROC) compared with that obtained by a conventional approach.

Soil moisture retrieval from polarimetric synthetic aperture radar (SAR) imagery over forested terrain is quite a challenging problem, because the radar backscatter is affected by not only the moisture content, but also by large vegetation structures such as the trunks and branches. Although a large number of algorithms which exploit radar backscatter to infer soil moisture have been developed, most of them are limited to the case of bare soil or little vegetation cover that an incident wave can easily reach the soil surface without serious disturbance. However, natural land surfaces are rarely free from vegetation, and the disturbance in radar backscatter must be properly compensated to achieve accurate soil moisture measurement in a diversity of terrain surfaces. In this paper, a simple polarimetric parameter, co-polarized backscattering ratio, is shown to be a criterion to infer moisture content of forested terrain, from both a theoretical forest scattering simulation and an appropriate experimental validation under well-controlled condition. Though modeling of forested terrain requires a number of scattering mechanisms to be taken into account, it is essential to isolate them one by one to better understand how soil moisture affects a specific and principal scattering component. For this purpose, we consider a simplified microwave scattering model for forested terrain, which consists of a cloud of dielectric cylinders as a representative of trunks, vertically stood on a flat dielectric soil surface. This simplified model can be considered a simple boreal forest model, and it is revealed that the co-polarization ratio in the ground-trunk double-bounce backscattering can be an useful index to monitor the relative variation in the moisture content of the boreal forest.

Polarimetric coherence strongly relates to the types and orientations of local scatterers. An optimization scheme is proposed to optimize the coherence between two polarimetric channels for polarimetric SAR (PolSAR) data. The coherence magnitude (correlation coefficient) is maximized by rotating a polarimetric coherence matrix in the rotation domain around the radar line of sight. L-band E-SAR and X-band Pi-SAR PolSAR data sets are used for demonstration and validation. The coherence of oriented manmade targets is significantly enhanced while that of forests remains relatively low. Therefore, the proposed technique can effectively discriminate these two land covers which are easily misinterpreted by the conventional model-based decomposition. Moreover, based on an optimized polarimetric coherence parameter and the total backscattered power, a simple manmade target extraction scheme is developed for application demonstration. This approach is applied with the Pi-SAR data. The experimental results validate the effectiveness of the proposed method.

Synthetic aperture radar (SAR) is an indispensable tool for low visibility ground surface measurement owing to its robustness against optically harsh environments such as adverse weather or darkness. As a leading-edge approach for SAR image processing, the coherent change detection (CCD) technique has been recently established; it detects a temporal change in the same region according to the phase interferometry of two complex SAR images. However, in the case of general damage assessment following an earthquake or mudslide, the technique requires not only the detection of surface change but also an assessment for height change quantity, such as occurs with a building collapse or road subsidence. While the interferometric SAR (InSAR) approach is suitable for height assessment, it is basically unable to detect change if only a single observation is made. To address this issue, we previously proposed a method of estimating height change according to phase interferometry of the coherence function obtained by dual band-divided SAR images. However, the accuracy of this method significantly degrades in noisy situations owing to the use of the phase difference. To resolve this problem, this paper proposes a novel height estimation method by exploiting the frequency characteristic of coherence phases obtained by each SAR image multiply band-divided. The results obtained from numerical simulations and experimental data demonstrate that our proposed method offers accurate height change estimation while avoiding degradation in the spatial resolution.

In this paper, a new method is proposed for unsupervised speckle level estimation in synthetic aperture radar (SAR) images. It is assumed that fully developed speckle intensity has a Gamma distribution. Based on this assumption, estimation of the equivalent number of looks (ENL) is transformed into noise variance estimation in the logarithmic SAR image domain. In order to improve estimation accuracy, texture analysis is also applied to exclude areas where speckle is not fully developed (e.g., urban areas). Finally, the noise variance is estimated by a 2-dimensional autoregressive (AR) model. The effectiveness of the proposed method is verified with several SAR images from different SAR systems and simulated images.

The optimization of polarimetric contract enhancement (OPCE) is one of the important problems in radar polarimetry since it provides a substantial benefit for target enhancement. Considering different scattering mechanisms between the desired targets and the undesired targets, Yang et al. extended the OPCE model to the generalized OPCE (GOPCE) problem. Based on a modified GOPCE model and the linear discriminant analysis, a ship detector is proposed in this paper to improve the detection performance for polarimetric Synthetic Aperture Radar (SAR) imagery. In the proposed method, we modify the combination form of the three polarimetric parameters (i.e., the plane scattering similarity parameter, the diplane scattering similarity parameter and the Cloude entropy), then use an optimization function resembling the classical Fisher criterion to optimize the optimal polarization states corresponding to the radar received power and the fusion vector corresponding to the polarimetric parameters. The principle of the optimization detailed in this paper lies in maximizing the difference between the desired targets and sea clutter, and minimizing the clutter variance at the same time. RADARSAT-2 polarimetric SAR data acquired over Tanggu Port (Tianjin, China) on June 23, 2011 are used for validation. The experimental results show that the proposed method improves the contrast of the targets and sea clutter and meanwhile reduces the clutter variance. In comparison to another GOPCE based ship detector and the classical polarimetric whitening filter (PWF), the proposed method shows a better performance for weak targets. In addition, we also use the RADARSAT-2 data acquired over San-Francisco on April 9, 2008 to further demonstrate the improvement of this method for target contrast.

Microwave imaging techniques, in particular synthetic aperture radar (SAR), are able to obtain useful images even in adverse weather or darkness, which makes them suitable for target position or feature estimation. However, typical SAR imagery is not informative for the operator, because it is synthesized using complex radio signals with greater than 1.0 m wavelength. To deal with the target identification issue for imaging radar, various automatic target recognition (ATR) techniques have been developed. One of the most promising ATR approaches is based on neural network classification. However, in the case of SAR images heavily contaminated by random or speckle noises, the classification accuracy is severely degraded because it only compares the outputs of neurons in the final layer. To overcome this problem, this paper proposes a self organized map (SOM) based ATR method, where the binary SAR image is classified using the unified distance matrix (U-matrix) metric given by the SOM. Our numerical analyses and experiments on 5 types of civilian airplanes, demonstrate that the proposed method remarkably enhances the classification accuracy, particular in lower S/N situations, and holds a significant robustness to the angular variations of the observation.

In this letter, a new terrain type classifier is proposed for polarimetric Synthetic Aperture Radar (Pol-SAR) images. This classifier uses the binary tree structure. The homogenous and inhomogeneous areas are first classified by the support vector machine (SVM) classifier based on the texture features extracted from the span image. Then the homogenous and inhomogeneous areas are, respectively, classified by the traditional Wishart classifier and the SVM classifier based on the texture features. Using a NASA/JPL AIRSAR image, the authors achieve the classification accuracy of up to 98%, demonstrating the effectiveness of the proposed method.

The optimization of polarimetric contrast enhancement (OPCE) is a widely used method for maximizing the received power ratio of a desired target versus an undesired target (clutter). In this letter, a new model of the OPCE is proposed based on the Fisher criterion. By introducing the well known two-class problem of linear discriminant analysis (LDA), the proposed model is to enlarge the normalized distance of mean value between the target and the clutter. In addition, a cross-iterative numerical method is proposed for solving the optimization with a quadratic constraint. Experimental results with the polarimetric SAR (POLSAR) data demonstrate the effectiveness of the proposed method.

An inversion method of bridge height over water by polarimetric synthetic aperture radar (SAR) is developed. A geometric ray description to illustrate scattering mechanism of a bridge over water surface is identified by polarimetric image analysis. Using the mapping and projecting algorithm, a polarimetric SAR image of a bridge model is first simulated and shows that scattering from a bridge over water can be identified by three strip lines corresponding to single-, double-, and triple-order scattering, respectively. A set of polarimetric parameters based on the de-orientation theory is applied to analysis of three types scattering, and the thinning-clustering algorithm and Hough transform are then employed to locate the image positions of these strip lines. These lines are used to invert the bridge height. Fully polarimetric image data of airborne Pi-SAR at X-band are applied to inversion of the height and width of the Naruto Bridge in Japan. Based on the same principle, this approach is also applicable to spaceborne ALOSPALSAR single-polarization data of the Eastern Ocean Bridge in China. The results show good feasibility to realize the bridge height inversion.

This article presents the analysis of the Bragg scattering phenomenon which has been observed in the images of machine-planted rice paddies acquired by the JERS-1 L-band synthetic aperture radar (SAR). The simultaneous measurements of rice plants were made at the SAR data acquisition times. Large differences of 20-25 dB in image intensity between the transplanting and ripening stages are found to be dependent on the planting direction and bunch separation. This selective image enhancement is a result of the Bragg resonance backscatter due to the double-bounce of incident L-band microwave between the flooded water surface and periodically planted bunches of rice plants. Support for the idea of double-bounce scattering is provided by the decomposition analysis of L-band and X-band polarimetric Pi-SAR data; and a simple numerical simulation based on the physical optics model shows fairly good agreement with the JERS-1 SAR data. The results presented in this paper is mainly of academic interest, but a suggestion can be made on the selection of suitable microwave band for monitoring rice fields.

In this letter, a new formula is proposed for calculating the polarization entropy, based on the least square method. There is no need to calculate the eigenvalues of a covariance matrix as well as to use logarithms of values. So the time for computing the polarization entropy is reduced. Using polarimetric SAR data, the authors validate the effectiveness of the new formula.

JERS-1 L-band SAR data can be, especially over urban areas affected by ground radar interferences. For most of the applications of the data the interferences should be suppressed. Notch filtering during image correlation process is one of the straightforward ways to do this. However, lower the threshold is, more signals from earth surface is eliminated. In this paper, a probability density function (PDF's) model of the ground radar interference signal is worked out from experimental data, and used for the suppression of interferences and the preservation of backscattered signals. The validity of the model is confirmed against real SAR data, and a general filter threshold--applicable to all JERS-1 SAR data--without any conditions is proposed.

The development of Radar Polarimetry and Radar Interferometry is advancing rapidly. Whereas with radar polarimetry, the textural fine-structure, target orientation, symmetries and material constituents can be recovered with considerable improvement above that of standard amplitude-only radar; with radar interferometry the spatial (in depth) structure can be explored. In Polarimetric Interferometric Synthetic Aperture Radar (POL-IN-SAR) Imaging, it is possible to recover such co-registered textural and spatial information from POL-IN-SAR digital image data sets simultaneously, including the extraction of Digital Elevation Maps (DEM) from either Polarimetric (scattering matrix) or Interferometric (single platform: dual antenna) SAR systems. Simultaneous Polarimetric-plus-Interferometric SAR offers the additional benefit of obtaining co-registered textural-plus-spatial three-dimensional POL-IN-DEM information, which when applied to Repeat-Pass Image-Overlay Interferometry provides differential background validation, stress assessment and environmental stress-change information with high accuracy. Then, by either designing Multiple Dual-Polarization Antenna POL-IN-SAR systems or by applying advanced POL-IN-SAR image compression techniques, it will result in POL-arimetric TOMO-graphic (Multi-Inter-ferometric) SAR or POL-TOMO-SAR Imaging. This is of direct relevance to local-to-global environmental background validation, stress assessment and stress-change monitoring of the terrestrial and planetary covers.