Recently, P2PTV is a popular application to deliver video streaming data over the Internet. On the overlay network, P2PTV applications create logical links between pairs of peers considering round trip time (RTT) without physical network consideration. P2PTV packets are shared over a network without localization awareness which is a serious problem for Internet Service Providers (ISPs). A delay-insertion-based traffic localization scheme was proposed for solving this problem. However, this scheme sometimes leads the newly joining peer to download streaming traffic from a local neighbor peer which has only scarce upload bandwidth. This paper proposes a novel scheme of delay-insertion-based traffic localization in which the router estimates relay capability to each relay peer candidate and leads the newly joining peer to connect to a neighbor peer with sufficient performance for relaying video data. Parameters were evaluated for the optimized condition in the relay capability estimation process. In addition, experiments conducted on a real network show that our proposed scheme can prevent the newly joining peer from downloading video data from peers with insufficient relay capability and maintain video quality close to normal in a P2PTV system while ensuring efficient traffic localization at the level of the Autonomous System (AS) network.

Most peer-to-peer (P2P) systems build their own overlay networks for implementing peer selection strategies without taking into account the locality on the underlay network. As a result, a large quantity of traffic crossing internet service providers (ISPs) or autonomous systems (ASes) is generated on the Internet. Controlling the P2P traffic is therefore becoming a big challenge for the ISPs. To control the cost of the cross-ISP/AS traffic, ISPs often throttle and/or even block P2P applications in their networks. In this paper, we propose a router-aided approach for localizing the P2P traffic hierarchically; it features the insertion of additional delay into each P2P packet based on geographical location of its destination. Compared to the existing approaches that solve the problem on the application layer, our proposed method does not require dedicated servers, cooperation between ISPs and P2P users, or modification of existing P2P application software. Therefore, the proposal can be easily utilized by all types of P2P applications. Experiments on P2P streaming applications indicate that our hierarchical traffic localization method not only reduces significantly the inter-domain traffic but also maintains a good performance of P2P applications.

We introduce a new kind of P2P traffic localization technique, called Netpherd, benefiting from the network virtualization technique for its successful deployment. Netpherd exploits one feature of P2P applications, a peer selection adaptation (i.e., preferring peers who are likely to provide better performance) for the traffic localization. Netpherd tries to enable local peers (i.e., peers in target network domain) to communicate with each other by affecting the peer selection adaptation. To affect the peer selection adaptation, Netpherd adds artificial delay to inter-domain traffic going to local peers. Our experiment conducted over Internet testbed verifies that Netpherd achieves the traffic localization and also improves the content download performance with the network delay insertion. In addition, we show that how the network virtualization technique can be utilized for efficient and graceful implementation of Netpherd.

In this paper, we examine a new P2P traffic localization approach that exploits peer selection adaptation (i.e., preferring peers who are likely to provide better performance), called Netpherd. Netpherd enables peers to communicate with local domain peers by manipulating networking performance across network domains (i.e., adding an artificial delay to inter-domain traffic). Our feasibility study shows that Netpherd reduces the inter-domain traffic by influencing peer selection adaptation. Netpherd also improves download performance of the peers who know many local domain peers. We discuss one guideline to improve Netpherd based on the feasibility study and verify the guideline with evaluation results.

In general-synchronous framework, in which the clock is distributed periodically to each register but not necessarily simultaneously, the circuit performance such as the clock period is expected to be improved by delay insertion. However, if the amount of inserted delays is too much, then the circuit is changed too much and the circuit performance might not be improved. In this paper, we propose an efficient delay insertion method that minimizes the amount of inserted delays in the clock period improvement in general-synchronous framework. In the proposed method, the amount of inserted delays is minimized by using an appropriate clock schedule and by inserting delays into appropriate places in the circuit. Experiments show that the proposed method can obtain optimum solutions in short time in many cases.

Under the assumption that clock can be inputted to each register at an arbitrary timing, the minimum feasible clock period can be determined if delays between registers are given. This minimum feasible clock period might be reduced if delays between some registers are increased by delay insertion. In this paper, we propose a delay insertion algorithm to reduce the minimum clock period. First, the proposed algorithm determines a clock schedule ignoring some constraints. Second, the algorithm inserts delays to recover ignored constraints according to the delay-slack and delay-demand of the obtained clock schedule. We show that the proposed algorithm achieves the minimum clock period by delay insertion if the delay of each element in the circuit is unique. Experiments show that the amount of inserting delay and computational time are smaller than the conventional algorithm.

A semi-synchronous circuit is a circuit in which every register is ticked by a clock periodically, but not necessarily simultaneously. In a semi-synchronous circuit, the minimum delay between registers may be critical with respect to the clock period of the circuit, while it does not affect the clock period of an ordinary synchronous circuit. In this paper, we discuss a delay insertion method which makes such a semi-synchronous circuit faster. The maximum delay-to-register ratio over the cycles in the circuit gives a lower bound of the clock period. We show that this bound is achieved in the semi-synchronous framework by the proposing gate-level delay insertion method.