Non-Terrestrial-Network (NTN) can provide seamless and ubiquitous connectivity of massive devices. Thus, the feeder links between satellites and gateways need to provide essentially high data transmission rates. In this paper, we focus on a typical high-capacity scenario, i.e., LEO-IoT, to find an optimal satellite selection schema to maximize the capacity of feeder links. The proposed schema is able to obtain the optimal mapping among all the satellites and gateways. By comparing with maximum service time algorithm, the proposed schema can construct a more balanced and reasonable connection pattern to improve the efficiency of the gateways. Such an advantage will become more significant as the number of satellites increases.

Parallel line feeder (PLF) consisting of a two-wire transmission line operating in the MHz band has been proposed as a wide-coverage short-distance wireless charging. In the MHz band, a PLF of several meters suffers from standing wave effect, resulting in fluctuation in power transfer efficiency accordingly to the receiver's position. This paper studies a modified version of the system, where the PLF is divided into individually compensated segments to mitigate the standing wave effect. Modelling the PLF as a lossy transmission line, this paper theoretically shows that if the segments' lengths are properly determined, it is able to improve and stabilize the efficiency for all positions. Experimental results at 27.12 MHz confirm the theoretical analysis and show that a fairly high efficiency of 70% can be achieved.

Vision systems are widely adopted in industrial fields for monitoring and automation. As a typical example, industrial vision systems are extensively implemented in vibrator parts feeder to ensure orientations of parts for assembling are aligned and disqualified parts are eliminated. An efficient parts orientation recognition and counting method is thus critical to adopt. In this paper, an integrated method for fast parts counting and orientation recognition using industrial vision systems is proposed. Original 2D spatial image signal of parts is decomposed to 1D signal with its temporal variance, thus efficient recognition and counting is achievable, feeding speed of each parts is further leveraged to elaborate counting in an adaptive way. Experiments on parts of different types are conducted, the experimental results revealed that our proposed method is both more efficient and accurate compared to other relevant methods.

A rectangular-to-radial waveguide transformer through a crossed slot is proposed as a feeder of a radial line slot antenna (RLSA) for use in a system of solar power satellite (SPS). The transformer is analyzed and designed by using the MoM with numerical eigenmode basis functions. The measured ripple of the amplitude is 3.0 dB in the φ-direction and a 7.0% frequency bandwidth for rotating mode with the ripple below 6 dB is obtained. This bandwidth is wider than that of conventional ring slot or cavity resonator with a coaxial feeder. The antenna measurements at 5.8 GHz show reasonable rotational symmetry both in the near-field distribution and the far field radiation patterns. The reflection is -27.7 dB at the design frequency and below -15 dB in the 7.0% bandwidth. The gain of the antenna with the diameter of 300 mm is 22.7 dBi and the efficiency is 56%.

This paper investigates based on laboratory experiments the multiuser interference suppression effect of the coherent adaptive antenna array diversity (CAAAD) receiver employing an optical fiber feeder in the intermediate frequency (IF) stage, aiming at the practical use of adaptive antenna array beam forming techniques based on the W-CDMA air interface. We employed a configuration in which the optical fiber conversion, i.e., electrical-to-optical (E/O) conversion (vice versa (O/E)), is performed on a received signal amplified by an automatic gain control (AGC) amplifier in the IF stage, to abate the impact of the noise component generated by the E/O (O/E) converters. We first show by computer simulation the superiority of the optical fiber conversion in the IF stage to that in the radio frequency (RF) stage based on the achievable bit error rate (BER) performance. Furthermore, experimental results elucidate that the loss in the required transmit signal energy per bit-to-background noise power spectrum density ratio (Eb/N0) of the implemented CAAAD receiver at the average BER of 10-3 employing the optical fiber feeders in the IF stage compared to that with coaxial cables is within a mere 0.2 dB (six antennas, three users, two-path Rayleigh fading channel model, and the ratio of the target signal energy per bit-to-interference power spectrum density ratio (Eb/I0) of the desired user to that of the interfering users for fast transmission power control (TPC) is ΔEb/I0=-15 dB).

Transmission characteristics of a high permittivity NRD guide were investigated. A preferable operating mode of the high permittivity NRD guide was newly identified and the wide bandwidth and low loss nature of the millimeter-wave region were observed. Moreover, a technique for construction of a millimeter-wave antenna was developed based on the high permittivity NRD guide. The novelty of the present technique lies in the use of a simple radiator, which consists of a tapered dielectric strip of simple structure which has good compatibility with millimeter wave integrated circuits. Since this radiator has a broad radiation pattern, a new type of antenna compatible with millimeter-wave integrated circuits for marine radar use was fabricated by locating the radiator at the focal point of a cylindrical parabolic reflector. Suitable beam patterns with half-power beam widths of 4in the azimuth plane and 38in the elevation plane can be obtained at 35 GHz.

We analyze the performance of soft handoff used as intergroup handoff in the fiber-optic cellular system. Performance is evaluated in view of blocking and handoff refused probability. The numerical results show that the smaller the handoff region or the more the channel, the larger the system capacity.

We analyze the performance of soft handoff used as intergroup handoff in the fiber-optic cellular system. Performance is evaluated in view of blocking and handoff refused probability. The numerical results show that the smaller the handoff region or the more the channel, the larger the system capacity.

This paper develops a prediction model for evaluating the influence of propagation attenuation due to aircraft's flying across the earth-satellite link. This prediction model is based on the Aperture-field method of Huygens-Fresnel wave theory. Considering arriving and taking off course around airport, attenuation impairment is calculated for different types of aircrafts and flight directions. In order to verify this model's accuracy, numerical results are compared with measurement values. The calculations agree well with the measurements. Ground antenna directivity and anticipated impairment to digital broadcasting system such as Perfect TV are also discussed.

In this paper, we propose to use graded-index multimode fibers (GI-MMFs) with Fabry-Perot laser diodes (FP-LDs) for short-span and low-cost feeders. The multimode fiber feeders can be applied to wireless personal communication systems where the required feeder length is within several hundred meters, such as distributed antenna networks for microcellular systems or wireless LANs. The use of multimode fibers makes fiber coupling and connection easier, and has the potential to greatly reduce total system cost. Three types of GI-MMFs are considered as transmission media, (1) silica-based glass optical fiber (GI-GOF),(2) silica-core plastic-clad fiber (GI-PCF), and (3) all-plastic optical fiber (GI-POF). It is shown that GI-GOF and GI-PCF are suitable for use as feeders in the microcells of CDMA cellular and wireless LAN systems within 300m in length. GI-POF is estimated to be suitable for use as feeders in wireless LANs within 100m in length. A multimode fiber feeder with FP-LDs and GI-PCF of 300 m is developed in order to demonstrate its applicability to a wireless LAN system operating in the 2.4 GHz ISM band.