With the arrival of 5G and the popularity of smart devices, indoor localization technical feasibility has been verified, and its market demands is huge. The channel state information (CSI) extracted from Wi-Fi is physical layer information which is more fine-grained than the received signal strength indication (RSSI). This paper proposes a CSI correction localization algorithm using DenseNet, which is termed CorFi. This method first uses isolation forest to eliminate abnormal CSI, and then constructs a CSI amplitude fingerprint containing time, frequency and antenna pair information. In an offline stage, the densely connected convolutional networks (DenseNet) are trained to establish correspondence between CSI and spatial position, and generalized extended interpolation is applied to construct the interpolated fingerprint database. In an online stage, DenseNet is used for position estimation, and the interpolated fingerprint database and K-nearest neighbor (KNN) are combined to correct the position of the prediction results with low maximum probability. In an indoor corridor environment, the average localization error is 0.536m.

In this paper, we present a classification method for a Computer-Aided Diagnosis (CAD) system in a colorectal magnified Narrow Band Imaging (NBI) endoscopy. In an endoscopic video image, color shift, blurring or reflection of light occurs in a lesion area, which affects the discrimination result by a computer. Therefore, in order to identify lesions with high robustness and stable classification to these images specific to video frame, we implement a CAD system for colorectal endoscopic images with the Convolutional Neural Network (CNN) feature and Support Vector Machine (SVM) classification on the embedded DSP core. To improve the robustness of CAD system, we construct the SVM learned by multiple image sizes data sets so as to adapt to the noise peculiar to the video image. We confirmed that the proposed method achieves higher robustness, stable, and high classification accuracy in the endoscopic video image. The proposed method also can cope with differences in resolution by old and new endoscopes and perform stably with respect to the input endoscopic video image.

Deep neural networks show good performance in image recognition, speech recognition, and pattern analysis. However, deep neural networks show weaknesses, one of which is vulnerability to backdoor attacks. A backdoor attack performs additional training of the target model on backdoor samples that contain a specific trigger so that normal data without the trigger will be correctly classified by the model, but the backdoor samples with the specific trigger will be incorrectly classified by the model. Various studies on such backdoor attacks have been conducted. However, the existing backdoor attack causes misclassification by one classifier. In certain situations, it may be necessary to carry out a selective backdoor attack on a specific model in an environment with multiple models. In this paper, we propose a multi-model selective backdoor attack method that misleads each model to misclassify samples into a different class according to the position of the trigger. The experiment for this study used MNIST and Fashion-MNIST as datasets and TensorFlow as the machine learning library. The results show that the proposed scheme has a 100% average attack success rate for each model while maintaining 97.1% and 90.9% accuracy on the original samples for MNIST and Fashion-MNIST, respectively.

Deep neural networks (DNNs) have achieved excellent performance on several tasks and have been widely applied in both academia and industry. However, DNNs are vulnerable to adversarial machine learning attacks in which noise is added to the input to change the networks' output. Consequently, DNN-based mission-critical applications such as those used in self-driving vehicles have reduced reliability and could cause severe accidents and damage. Moreover, adversarial examples could be used to poison DNN training data, resulting in corruptions of trained models. Besides the need for detecting adversarial examples, correcting them is important for restoring data and system functionality to normal. We have developed methods for detecting and correcting adversarial images that use multiple image processing operations with multiple parameter values. For detection, we devised a statistical-based method that outperforms the feature squeezing method. For correction, we devised a method that uses for the first time two levels of correction. The first level is label correction, with the focus on restoring the adversarial images' original predicted labels (for use in the current task). The second level is image correction, with the focus on both the correctness and quality of the corrected images (for use in the current and other tasks). Our experiments demonstrated that the correction method could correct nearly 90% of the adversarial images created by classical adversarial attacks and affected only about 2% of the normal images.

In this paper, we propose an image adjustment method for multi-exposure images based on convolutional neural networks (CNNs). We call image regions without information due to saturation and object moving in multi-exposure images lacking areas in this paper. Lacking areas cause the ghosting artifact in fused images from sets of multi-exposure images by conventional fusion methods, which tackle the artifact. To avoid this problem, the proposed method estimates the information of lacking areas via adaptive inpainting. The proposed CNN consists of three networks, warp and refinement, detection, and inpainting networks. The second and third networks detect lacking areas and estimate their pixel values, respectively. In the experiments, it is observed that a simple fusion method with the proposed method outperforms state-of-the-art fusion methods in the peak signal-to-noise ratio. Moreover, the proposed method is applied for various fusion methods as pre-processing, and results show obviously reducing artifacts.

Active network monitoring based on Boolean network tomography is a promising technique to localize link failures instantly in transport networks. However, the required set of monitoring trails must be recomputed after each link failure has occurred to handle succeeding link failures. Existing heuristic methods cannot compute the required monitoring trails in a sufficiently short time when multiple-link failures must be localized in the whole of large-scale managed networks. This paper proposes an approach for computing the required monitoring trails within an allowable expected period specified beforehand. A random walk-based analysis estimates the number of monitoring trails to be computed in the proposed approach. The estimated number of monitoring trails are computed by a lightweight method that only guarantees partial localization within restricted areas. The lightweight method is repeatedly executed until a successful set of monitoring trails achieving unambiguous localization in the entire managed networks can be obtained. This paper demonstrates that the proposed approach can compute a small number of monitoring trails for localizing all independent dual-link failures in managed networks made up of thousands of links within a given expected short period.

As an emerging technology, device-free localization (DFL) using wireless sensor networks to detect targets not carrying any electronic devices, has spawned extensive applications, such as security safeguards and smart homes or hospitals. Previous studies formulate DFL as a classification problem, but there are still some challenges in terms of accuracy and robustness. In this paper, we exploit a generalized thresholding algorithm with parameter p as a penalty function to solve inverse problems with sparsity constraints for DFL. The function applies less bias to the large coefficients and penalizes small coefficients by reducing the value of p. By taking the distinctive capability of the p thresholding function to measure sparsity, the proposed approach can achieve accurate and robust localization performance in challenging environments. Extensive experiments show that the algorithm outperforms current alternatives.

We propose an efficient network upgrade and expansion method that can make the most of the next generation channel resources to accommodate further increases in traffic. Semi-flexible grid configuration and two cost metrics are introduced to establish a regularity in frequency assignment and minimize disturbance in the upgrade process; both reduce the fragmentation in frequency assignment and the number of fibers necessary. Various investigations of different configurations elucidate that the number of fibers necessary is reduced about 10-15% for any combination of upgrade scenario, channel frequency bandwidth, and topology adopted.

Weighted Round-Robin (WRR) is often used, due to its simplicity, for scheduling packets or tasks. With WRR, a number of packets equal to the weight allocated to a flow can be served consecutively, which leads to a bursty service. Interleaved Weighted Round-Robin (IWRR) is a variant that mitigates this effect. We are interested in finding bounds on worst-case delay obtained with IWRR. To this end, we use a network calculus approach and find a strict service curve for IWRR. The result is obtained using the pseudo-inverse of a function. We show that the strict service curve is the best obtainable one, and that delay bounds derived from it are tight (i.e., worst-case) for flows of packets of constant size. Furthermore, the IWRR strict service curve dominates the strict service curve for WRR that was previously published. We provide some numerical examples to illustrate the reduction in worst-case delays caused by IWRR compared to WRR.

In cloud radio access networks (C-RANs) architecture, the Hybrid Automatic Repeat Request (HARQ) protocol imposes a strict limit on the latency between the baseband unit (BBU) pool and the remote radio head (RRH), which is a key challenge in the adoption of C-RANs. In this letter, we propose a joint edge caching and network coding strategy (ENC) in the C-RANs with multicast fronthaul to improve the performance of HARQ and thus achieve ultra-low latency in 5G cellular systems. We formulate the edge caching design as an optimization problem for maximizing caching utility so as to obtain the optimal caching time. Then, for real-time data flows with different latency constraints, we propose a scheduling policy based on network coding group (NCG) to maximize coding opportunities and thus improve the overall latency performance of multicast fronthaul transmission. We evaluate the performance of ENC by conducting simulation experiments based on NS-3. Numerical results show that ENC can efficiently reduce the delivery delay.

In a heterogeneous unreliable multiaccess network, wherein terminals share a common wireless channel with distinct error probabilities, existing works have shown that a persistent round-robin (RR-P) scheduling policy can be arbitrarily worse than the optimum in terms of Age of Information (AoI) under standard Automatic Repeat reQuest (ARQ). In this paper, practical Hybrid ARQ (HARQ) schemes which are widely-used in today's wireless networks are considered. We show that RR-P is very close to optimum with asymptotically many terminals in this case, by explicitly deriving tight, closed-form AoI gaps between optimum and achievable AoI by RR-P. In particular, it is rigorously proved that for RR-P, under HARQ models concerning fading channels (resp. finite-blocklength regime), the relative AoI gap compared with the optimum is within a constant of 6.4% (resp. 6.2% with error exponential decay rate of 0.5). In addition, RR-P enjoys the distinctive advantage of implementation simplicity with channel-unaware and easy-to-decentralize operations, making it favorable in practice. A further investigation considering constraint imposed on the number of retransmissions is presented. The performance gap is indicated through numerical simulations.

Leveraging on Network Function Virtualization (NFV) and Software Defined Networking (SDN), network slicing (NS) is recognized as a key technology that enables the 5G Infrastructure Provider (InP) to support diversified vertical services over a shared common physical infrastructure. 5G end-to-end (E2E) NS is a logical virtual network that spans across the 5G network. Existing works on improving the reliability of the 5G mainly focus on reliable wireless communications, on the other hand, the reliability of an NS also refers to the ability of the NS system to provide continued service. Hence, in this work, we focus on enhancing the reliability of the NS to cope with physical network node failures, and we investigate the NS deployment problem to improve the reliability of the system represented by the NS. The reliability of an NS is enhanced by two means: firstly, by considering the topology information of an NS, critical virtual nodes are backed up to allow failure recovery; secondly, the embedding of the augmented NS virtual network is optimized for failure avoidance. We formulate the embedding of the augmented virtual network (AVN) to maximize the survivability of the NS system as the survivable AVN embedding (S-AVNE) problem through an Integer Linear Program (ILP) formulation. Due to the complexity of the problem, a heuristic algorithm is introduced. Finally, we conduct intensive simulations to evaluate the performance of our algorithm with regard to improving the reliability of the NS system.

Multi-FPGA systems have gained attention because of their high performance and power efficiency. A multi-FPGA system called Flow-in-Cloud (FiC) is currently being developed as an accelerator of multi-access edge computing (MEC). FiC consists of multiple mid-range FPGAs tightly connected by high-speed serial links. Since time-critical jobs are assumed in MEC, a circuit-switched network with static time-division multiplexing (STDM) switches has been implemented on FiC. This paper investigates techniques of enhancing the interconnection performance of FiC. Unlike switching fabrics for Network on Chips or parallel machines, economical multi-FPGA systems, such as FiC, use Xilinx Aurora IP and FireFly cables with multiple lanes. We adopted the link aggregation and the slot distribution for using multiple lanes. To mitigate the bottleneck between an STDM switch and user logic, we also propose a multi-ejection STDM switch. We evaluated various combinations of our techniques by using three practical applications on an FiC prototype with 24 boards. When the number of slots is large and transferred data size is small, the slot distribution was sometimes more effective, while the link aggregation was superior for other most cases. Our multi-ejection STDM switch mitigated the bottleneck in ejection ports and successfully reduced the number of time slots. As a result, by combining the link aggregation and multi-ejection STDM switch, communication performance improved up to 7.50 times with few additional resources. Although the performance of the fast Fourier transform with the highest communication ratio could not be enhanced by using multiple boards when a lane was used, 1.99 times performance improvement was achieved by using 8 boards with four lanes and our multi-ejection switch compared with a board.

Pain is an essential physiological phenomenon of human beings. Accurate assessment of pain is important to develop proper treatment. Although self-report method is the gold standard in pain assessment, it is not applicable to individuals with communicative impairment. Non-verbal pain indicators such as pain related facial expressions and changes in physiological parameters could provide valuable insights for pain assessment. In this paper, we propose a multimodal-based Stream Integrated Neural Network with Different Frame Rates (SINN) that combines facial expression and biomedical signals for automatic pain assessment. The main contributions of this research are threefold. (1) There are four-stream inputs of the SINN for facial expression feature extraction. The variant facial features are integrated with biomedical features, and the joint features are utilized for pain assessment. (2) The dynamic facial features are learned in both implicit and explicit manners to better represent the facial changes that occur during pain experience. (3) Multiple modalities are utilized to identify various pain states, including facial expression and biomedical signals. The experiments are conducted on publicly available pain datasets, and the performance is compared with several deep learning models. The experimental results illustrate the superiority of the proposed model, and it achieves the highest accuracy of 68.2%, which is up to 5% higher than the basic deep learning models on pain assessment with binary classification.

In this paper, we present a simple yet powerful deep neural network for natural image dehazing. The proposed method is designed based on U-Net architecture and we made some design changes to make it better. We first use Group Normalization to replace Batch Normalization to solve the problem of insufficient batch size due to hardware limitations. Second, we introduce FReLU activation into the U-Net block, which can achieve capturing complicated visual layouts with regular convolutions. Experimental results on public benchmarks demonstrate the effectiveness of the modified components. On the SOTS Indoor and Outdoor datasets, it obtains PSNR of 32.23 and 31.64 respectively, which are comparable performances with state-of-the-art methods. The code is publicly available online soon.

This article proposes to apply the auto-correlation function (ACF), bispectrum analysis, and convolutional neural networks (CNN) to implement radar emitter identification (REI) based on intrapulse features. In this work, we combine ACF with bispectrum for signal feature extraction. We first calculate the ACF of each emitter signal, and then the bispectrum of the ACF and obtain the spectrograms. The spectrum images are taken as the feature maps of the radar emitters and fed into the CNN classifier to realize automatic identification. We simulate signal samples of different modulation types in experiments. We also consider the feature extraction method directly using bispectrum analysis for comparison. The simulation results demonstrate that by combining ACF with bispectrum analysis, the proposed scheme can attain stronger robustness to noise, the spectrograms of our approach have more pronounced features, and our approach can achieve better identification performance at low signal-to-noise ratios.

Convolutional neural networks (CNNs) are widely used for image processing tasks in both embedded systems and data centers. In data centers, high accuracy and low latency are desired for various tasks such as image processing of streaming videos. We propose an FPGA-based low-latency CNN inference for randomly wired convolutional neural networks (RWCNNs), whose layer structures are based on random graph models. Because RWCNNs have several convolution layers that have no direct dependencies between them, our architecture can process them efficiently using a pipeline method. At each layer, we need to use the calculation results of multiple layers as the input. We use an FPGA with HBM2 to enable parallel access to the input data with multiple HBM2 channels. We schedule the order of execution of the layers to improve the pipeline efficiency. We build a conflict graph using the scheduling results. Then, we allocate the calculation results of each layer to the HBM2 channels by coloring the graph. Because the pipeline execution needs to be properly controlled, we developed an automatic generation tool for hardware functions. We implemented the proposed architecture on the Alveo U50 FPGA. We investigated a trade-off between latency and recognition accuracy for the ImageNet classification task by comparing the inference performances for different input image sizes. We compared our accelerator with a conventional accelerator for ResNet-50. The results show that our accelerator reduces the latency by 2.21 times. We also obtained 12.6 and 4.93 times better efficiency than CPU and GPU, respectively. Thus, our accelerator for RWCNNs is suitable for low-latency inference.

Due to the rapid growth of the information industry, various Internet of Things (IoT) devices have been widely used in our daily lives. Since the demand for low-cost and high-performance hardware devices has increased, malicious third-party vendors may insert malicious circuits into the products to degrade their performance or to leak secret information stored at the devices. The malicious circuit surreptitiously inserted into the hardware products is known as a ‘hardware Trojan.’ How to detect hardware Trojans becomes a significant concern in recent hardware production. In this paper, we propose a hardware Trojan detection method that employs two-stage neural networks and effectively utilizes the Trojan probability of neighbor nets. At the first stage, the 11 Trojan features are extracted from the nets in a given netlist, and then we estimate the Trojan probability that shows the probability of the Trojan nets. At the second stage, we learn the Trojan probability of the neighbor nets for each net in the netlist and classify the nets into a set of normal nets and Trojan ones. The experimental results demonstrate that the average true positive rate becomes 83.6%, and the average true negative rate becomes 96.5%, which is sufficiently high compared to the existing methods.

This study has developed a system that performs data communications using high frequency bands of sound signals. Unlike radio communication systems using advanced wireless devices, it only requires the legacy devices such as microphones and speakers employed in ordinary telephony communication systems. In this study, we have investigated the possibility of a machine learning approach to improve the recognition accuracy identifying binary symbols exchanged through sound media. This paper describes some experimental results evaluating the performance of our proposed technique employing a neural network as its classifier of binary symbols. The experimental results indicate that the proposed technique may have a certain appropriateness for designing an optimal classifier for the symbol identification task.

With the rapid progress of the integrated nanophotonics technology, the optical neural network architecture has been widely investigated. Since the optical neural network can complete the inference processing just by propagating the optical signal in the network, it is expected more than one order of magnitude faster than the electronics-only implementation of artificial neural networks (ANN). In this paper, we first propose an optical vector-matrix multiplication (VMM) circuit using wavelength division multiplexing, which enables inference processing at the speed of light with ultra-wideband. This paper next proposes optoelectronic circuit implementation for batch normalization and activation function, which significantly improves the accuracy of the inference processing without sacrificing the speed performance. Finally, using a virtual environment for machine learning and an optoelectronic circuit simulator, we demonstrate the ultra-fast and accurate operation of the optical-electronic ANN circuit.