This paper describes a speed-oriented ultralow-voltage and low-power SOI circuit technique based on a differential enhancement- and depletion-mode (ED)-MOS circuit. Combining an ED-MOS circuit block for critical paths and a multi-Vth CMOS circuit block for noncritical paths, that is, the so-called differential ED-CMOS/SOI circuit, makes it possible to achieve low-power and ultrahigh-speed operation of over 1 GHz at a supply voltage of less than 0.5 V. As two applications of the differential ED-CMOS/SOI circuit, a multi-stage frequency divider that uses the ED-MOS circuit in a first-stage frequency divider and a pipelined adder with a CMOS pipeline register are described in detail. To verify the effectiveness of the ED-CMOS/SOI circuit scheme, we fabricated a 1/8 frequency divider and a 32-bit binary look-ahead carry (BLC) adder using the 0.25-µm MTCMOS/SOI process. The frequency divider operates down to 0.3 V with a maximum operating frequency of 3.6 GHz while suppressing power dissipation to 0.3 mW. The 32-bit adder operates at a frequency of 1 GHz at 0.5 V.

This paper describes an ultralow-power multi-threshold (MT) CMOS/SOI circuit technique that mainly uses fully-depleted MOSFETs. The MTCMOS/SOI circuit, which combines fully-depleted low- and medium-Vth CMOS/SOI logic gates and high-Vth power-switch transistors, makes it possible to lower the supply voltage to 0.5 V and reduce the power dissipation of LSIs to the 1-mW level. We overview some MTCMOS/SOI digital and analog components, such as a CPU, memory, analog/RF circuit and DC-DC converter for an ultralow-power mobile system. The validity of the ultralow-voltage MTCMOS/SOI circuits is confirmed by the demonstration of a self-powered 300-MHz-band short-range wireless system. A 1-V SAW oscillator and a switched-capacitor-type DC-DC converter in the transmitter makes possible self-powered transmission by the heat from a hand. In the receiver, a 0.5-V digital controller composed of a 8-bit CPU, 256-kbit SRAM, and ROM also make self-powered operation under illumination possible.