Exact bit error probabilities (BEP) are derived in closed-form for binary pulsed direct sequence (DS-) and hybrid direct sequence time hopping code division multiple access (DS/TH-CDMA) systems that have potential applications in ultra-wideband (UWB) communications. Flat Nakagami fading channel is considered and the characteristic function (CF) method is adopted. An exact expression of the CF is obtained through a straightforward method, which is simple and good for any arbitrary pulse shape. The CF is then used to obtain the exact BEP that requires less computational complexity than the method based on improved Gaussian approximation (IGA). It is shown under identical operating conditions that the shape of the CF, as well as, the BEP differs considerably for the two systems. While both the systems perform comparably in heavily faded channel, the hybrid system shows better BEP performance in lightly-faded channel. The CF and BEP also strongly depend on chip length and chip-duty that constitute the processing gain (PG). Different combinations of the parameters may result into the same PG and the BEP of a particular system for a constant PG, though remains nearly constant in a highly faded channel, may vary substantially in lightly-faded channel. A comparison of the results from the exact method with those from the standard Gaussian approximation (SGA) reveals that the SGA, though accurate for both the systems in highly-faded channel, becomes extremely optimistic for low-duty systems in lightly-faded channel. The SGA also fails to track several other system trade-offs.

We propose a neurodynamical approach to a large-scale optimization problem in Cognitive Wireless Clouds, in which a huge number of mobile terminals with multiple different air interfaces autonomously utilize the most appropriate infrastructure wireless networks, by sensing available wireless networks, selecting the most appropriate one, and reconfiguring themselves with seamless handover to the target networks. To deal with such a cognitive radio network, game theory has been applied in order to analyze the stability of the dynamical systems consisting of the mobile terminals' distributed behaviors, but it is not a tool for globally optimizing the state of the network. As a natural optimization dynamical system model suitable for large-scale complex systems, we introduce the neural network dynamics which converges to an optimal state since its property is to continually decrease its energy function. In this paper, we apply such neurodynamics to the optimization problem of radio access technology selection. We compose a neural network that solves the problem, and we show that it is possible to improve total average throughput simply by using distributed and autonomous neuron updates on the terminal side.

In one-cell-frequency-reuse Orthogonal Frequency Division Multiple Access based Time Division Multiple Access (OF/TDMA) systems, communication is blocked by interference from adjacent cells. The most promising solution would be an adaptive modulation and coding scheme that is controlled by estimating the signal-to-interference ratio (SIR). However, there has so far been no way to accurately estimate the SIR using the spreading codes for OF/TDMA systems, because of the asynchronous fast Fourier transform (FFT). In this paper, we propose a novel SIR estimation method that uses a spread pulse-wave symbol and carrier interferometry. Moreover, to introduce multi- input multi-output systems, we modify the proposed method by allocating a different spreading code to each cell. Computer simulation confirmed that the SIR is estimated accurately even if the FFT is asynchronous. On cell boundaries, the average estimation errors that are a ratio between accurate and estimated propagation characteristics are less than 2 dB.

We have recently extended one of the conceptions of the lossless universal pattern-matching coding, viz. the concept of coding via copying, to multi-dimensional lossy coding, and applied the extended concept to intraframe compression of still images. The work herein applies the extended concept of lossy coding via copying to interframe low-rate video compression, thus developing a novel low-rate interframe PMIC (pattern-matching image coding) technique, which produces the effect of generalizing the definition of a search area used in the existing block-matching motion compensation. We have experimentally shown the performance gain provided by the generalization within the framework of lossy coding via copying, and demonstrated that the interframe PMIC technique is usefull and potential as a basic means for low-rate video compression.

An exact expression of error rate is developed for maximal ratio combining (MRC) in an independent but not necessarily identically distributed frequency selective Nakagami fading channel taking into account inter-symbol, co-channel and adjacent channel interferences (ISI, CCI and ACI respectively). The characteristic function (CF) method is adopted. While accurate analysis of MRC performance cannot be seen in frequency selective channel taking ISI (and CCI) into account, such analysis for ACI has not been addressed yet. The general analysis presented in this paper solves a problem of past and present interest, which has so far been studied either approximately or in simulations. The exact method presented also lets us obtain an approximate error rate expression based on Gaussian approximation (GA) of the interferences. It is shown, especially while the channel is lightly faded, has fewer multipath components and a decaying delay profile, the GA may be substantially inaccurate at high signal-to-noise ratio. However, the exact results also reveal an important finding that there is a range of parameters where the simpler GA is reasonably accurate and hence, we don't have to go for more involved exact expression.

The Project Authorization Request (PAR) for the IEEE P1900.4 Working Group (WG), under the IEEE Standards Coordinating Committee 41 (SCC41) was approved in December 2006, leading to this WG being officially launched in February 2007 [1]. The scope of this standard is to devise a functional architecture comprising building blocks to enable coordinated network-device distributed decision making, with the goal of aiding the optimization of radio resource usage, including spectrum access control, in heterogeneous wireless access networks. This paper introduces the activities and work under progress in IEEE P1900.4, including its scope and purpose in Sects. 1 and 2, the reference usage scenarios where the standard would be applicable in Sect. 4, and its current system architecture in Sect. 5.

This paper summarizes the current status of regulations, standardization efforts and trials around the world regarding white space (WS) communications, especially television band WS (TVWS). After defining WS communication systems configurations and function and the categories of white space database, the TVWS regulations in United States, United Kingdom, and Japan are summarized. Then regarding status of standardization for TVWS devices, IEEE 802 and IEEE 1900 standards are summarized. Finally ongoing pilot projects and trials of WS communications in the world are summarized, and trends and future direction of research on WS communication systems are summarized.

Due to the advancement of software radio and RF technology, cognitive radio(CR) has become an enabling technology to realize dynamic spectrum access through its spectrum sensing and reconfiguration capability. Robust and reliable spectrum sensing is a key factor to discover spectrum opportunity. Single cognitive radios often fail to provide such reliable information because of their inherent sensitivity limitation. Primary signals that are subject to detection by cognitive radios may become weak due to several factors such as fading and shadowing. One approach to overcome this problem is to perform spectrum sensing by using multiple CRs or multiple spectrum sensors. This approach is known as distributed sensing because sensing is carried out through cooperation of spatially distributed sensors. In distributed sensing, sensors should perform spectrum sensing and forward the result to a destination where data fusion is carried out. Depending on the channel conditions between sensors (sensor-to-sensor channel) and between the sensor and the radio (user-channel), we explore different spectrum sensing algorithms where sensors provide the sensing information either cooperatively or independently. Moreover we investigate sensing schemes based on soft information combining (SC), hard information combining (HC). Finally we propose a two-stage detection scheme that uses both SC and HC. The newly proposed detection scheme is shown to provide improved performance compared to sensing based on either HC or SC alone. Computer simulation results are provided to illustrate the performances of the different sensing algorithms.

We previously proposed an architecture for software defined radio called the reconfigurable packet routing-oriented signal processing platform (RPPP). This architecture was suited to wireless signal processing applications, which require radio functions to be selected in real time depending on the transmitted signal. A number of radio standards are used in DSRC systems for vehicle communication and vehicle equipment is required to transmit and receive the radio signals used on each particular occasion. An implementation of RPPP is described in this paper that enables the dynamic handling of two ARIB standards for DSRC. After an explanation of the basic architecture and an analysis of RPPP, the implementation of a reconfigurable DSRC transceiver for ASK and π/4 shift-QPSK is described. The implementation is then discussed, evaluated in terms of the number of logic units needed. We concluded that our platform is 27.6% more efficient in utilizing logic than that achieved with fixed design.

During these years, we have been focusing on developing ultra high-data-rate wireless access systems for future wireless multimedia communications. One of such kind of systems is called DPC-OF/TDMA (dynamic parameter controlled orthogonal frequency and time division multiple access) which targets at beyond 100 Mbps data rate. In order to support higher data rates, e.g., several hundreds of Mbps or even Gbps for future wireless multimedia applications (e.g., streaming video and file transfer), it is necessary to enhance DPC-OF/TDMA system based on MIMO-OFDM (multiple-input multiple-output orthogonal frequency division multiplexing) platform. In this paper, we propose an enhanced DPC-OF/TDMA system based on Multi-Layer MIMO-OFDM scheme which combines both diversity and multiplexing in order to exploit potentials of both techniques. The performance investigation shows the proposed scheme has better performance than its counterpart based on full-multiplexing MIMO-OFDM scheme. In addition to the Exhaustive Detection (EXD) scheme which applies the same detection algorithm on each subcarrier independently, we propose the Reduced-Complexity Detection (RCD) scheme. The complexity reduction is achieved by exploiting the suboptimal Layer Detection Order and subcarrier correlation. The simulation results show that huge complexity can be reduced with very small performance loss, by using the proposed detection scheme. For example, 60.7% complexity can be cut off with only 1.1 dB performance loss for the 88 enhanced DPC-OF/TDMA system.

This paper proposes a channel estimation technique for the dynamic parameter controlled--orthogonal frequency and time division multiple access (DPC-OF/TDMA) systems studied as one of the candidates of the beyond third generation (B3G) systems. In the proposed scheme, the impulse response, which represents the channel state information (CSI) is estimated using carrier interferometry (CI) which is equivalent to impulse signal transmission. Moreover, because the minimum number of subcarriers allocated to terminals is 64, in order to estimate a CSI with its spreading factor of 64, we employ a code-multiplexed CI signal for a cell search process and a time-domain-multiplexed CI signal for transmit antenna identification. Furthermore, we also propose a flexible CSI estimation scheme that supports two cases: multiple subchannel block assignment and MIMO transmission cases. Computer simulation confirms that the proposed scheme can estimate the CSI with high accuracy.

Digitization of analog terrestrial TV broadcasting has recently been accelerated in many countries, and the effective utilization of vacant frequencies has also been investigated for new systems in each country. In Japan, a portion of vacant frequencies in the VHF-high band was allocated to the public broadband mobile communication (PBB) system. To evaluate the current PBB system and develop future broadband communication systems in this band, it is important to analyze the propagation channel more accurately. In this study, we characterize the propagation channel for 200MHz band broadband mobile communication systems, using measured channel impulse responses (CIRs). In the characterization process, the Saleh-Valenzuela (S-V) model is utilized to extract channel model parameters statistically. When evaluating the fluctuation of path power gain, we also propose to model the fluctuation of path power gain using the generalized extreme value distribution instead of the conventional log-normal distribution. The extracted CIR model parameters are validated by cumulative distribution function of root-means-square delay spread and maximum excess delay, comparing simulation result to measurement result. From the extracted CIR model parameters, we clarified the characteristics of 200MHz band broadband mobile communication systems in non-line-of-sight environments based on S-V model with the proposed channel model.

In this paper, an enhanced feathery receiver initiated transmission (eF-RIT) protocol is proposed for wireless smart utility network (Wi-SUN) systems with high traffic bi-directional communications such as emergency gas automatic meter infrastructure (AMI) cases. Firstly, we evaluate the conventional F-RIT protocol by simulation and experiment. The measurement results show that the IEEE 802.15.4e compliant conventional F-RIT protocol can achieve over 90% transmission success rates under the practical AMI specified conditions. However, the transmission success rates decline in high traffic environments. Detailed analyses indicate the degradation of the performance is caused by the timeout problem which occurs when the destination terminal is in the wait duration of the data transmission, and so does not transmit an RIT data request frame. To overcome this problem, we propose the eF-RIT protocol that suppresses the frequency of timeout occurrence. The proposed eF-RIT protocol is also evaluated by simulation and experiment. The evaluation results indicate that the proposed eF-RIT protocol reduces the incident of timeout by up to 31%, and achieves transmission success rates as high as 90% when the data generation rate is 1.0×10-2s-1.

This paper summarizes Wi-SUN communication systems and their physical (PHY) layer and media access control (MAC) specifications. Firstly, the Wi-SUN communication systems are categorized into three. The key PHY and MAC standards, IEEE 802.15.4g and .4e, that configure the systems are explained, and fundamental transmission performances of the systems in the PHY layer and MAC layer are evaluated by computer simulations. Then, the Wi-SUN alliance and the Wi-SUN profiles that include IEEE 802.15.4g and .4e are explained. Finally, to understand the transmission performance of actual IEEE 802.15.4g Wi-SUN radio devices, PER performances under AWGN and multipath fading environments are measured by using IEEE 802.15.4g compliant and Wi-SUN alliance certified radio modules. This paper is an instruction paper for the beginners of the Wi-SUN based communications systems.

In distributed spectrum sensing, spatially distributed sensors perform radio frequency (RF) sensing and forward the result to a fusion center (FC). Cognitive radio (CR) obtains spectral information from the FC. Distributed spectrum sensing facilitates reliable discovery of spectrum opportunity while providing enhanced protection to legacy systems. The overall performance of distributed spectrum sensing depends both on the quality of sensing at the individual sensors and the forwarding scheme from the individual sensors. In this aspect the choice of media access control (MAC) plays a significant role. We can improve the system performance by optimizing the MAC and the spectrum sensing parameters jointly. In this paper we propose an enhanced MAC scheme based on existing scheduled MAC protocols to yield a high performance distributed spectrum sensing. To demonstrate our idea, we provide computer simulation by considering energy detection based distributed spectrum sensors and IEEE 802.15.4 PHY and MAC parameters.

We have developed a code-division-multiplexing (CDM) transmission scheme for future cellular communication systems, which uses cyclic shifted-and-extended (CSE) codes generated from an M-sequence to enable seamless communication in highly mobile environments. Because the correlation characteristics of CSE codes are determined by the M-sequence, the cross-correlation values are accumulated as a result of combining transmitted signals with opposite polarities in parallel channels. The accumulated cross-correlation values significantly degrade transmission performance, especially with multi-level modulation schemes such as quadrature amplitude modulation (QAM). We thus propose a cancellation technique to eliminate the accumulated cross-correlation values. We have evaluated the transmission performance of the CDM transmission scheme with the proposed technique by computer simulation. The new scheme enables high-quality data transmission in fast-fading channels.

Selections of radio access networks by terminals are currently not coordinated and utilizations of the radio resources are not balanced. As a result, radio resources on some radio systems are occupied even though others can afford. In this paper, in order to provide a framework to resolve this issue, Cognitive Wireless Router (CWR) system is proposed for distributed management and independent reconfiguration of heterogeneous wireless networks. The proposed system selects appropriate operational frequency bands and radio systems to connect to the Internet in corporation between the CWRs and a server and therefore can provide optimized wireless Internet access easily even in environments without wired networks. The developed prototype system reconfigures the radio devices to connect to the Internet in 27 seconds at most. It is revealed that this reconfiguration time can be shortened to less than 100 ms by elaborating its procedure. It is also clarified that network data speed required at the server to deal with 10,000 CWRs is only 4.1 Mbps.

This paper presents the efficiency of a sensing database and caching (SDB) for cognitive radio systems. The proposed SDB stores regulatory information from regulatory databases, and contains sensing information by distributed sensing schemes. Preliminary information processing for instance indexing, sorting, or applying some models or algorithms, etc. can be performed for the stored data. Available information and the results of the information processing are provided to cognitive radios in order to determine available spectrum and to facilitate dynamic spectrum access at lower sensing cost but higher sensing quality. The SDB is implemented in local networks, therefore information exchange between SDB and the cognitive radios can be realized at low latency and the amount of signaling traffic to global network can be reduced. This paper analyzes the effect of SDB and the performance evaluation was done in a certain condition. As a result, by deploying SDB a system can achieve up to 20% of reduction of sensing activities and maximum 1.3 times higher sensing quality.

In this paper, the impact of chip duty factor (DF) on direct sequence (DS), time hopping (TH) and hybrid DS-TH ultra wideband (UWB) systems is investigated in realistic environments. Rake receivers are designed to perform energy capture (EC) on received UWB signals over multipath and multi-user environment in the presence of narrowband interference. It is found that by applying lower DF in the signal design, multipath resolvability can be increased and system performance can be improved. However, in contrary to the common belief, lower DF does not always contribute to performance improvement. On the other hand, it is observed that at extremely low DF, EC capability may be compromised, causing performance degradation. The optimum DF values for respective systems are determined and discussed in this paper. Additionally, the strength and tradeoff for DS, TH and DS-TH UWB systems employing varying DF are investigated and compared over multipath and multi-user environment. In a multipath environment, a selective Rake receiver with less than 10 fingers is found to be sufficient for energy capture. In a single user environment, DS-UWB system has the most superior performance, followed by DS-TH-UWB and TH-UWB systems. And in a multi-user environment, DS-TH-UWB is found to outperform the rest, followed by DS-UWB and TH-UWB systems.

In this paper, we investigate the impact of different sub-band spreading bandwidth (SSBW) on a direct sequence (DS) multiband (MB) ultra wideband (UWB) system in multipath and narrowband interference over realistic UWB channel models based on actual measurements. As an approach to effectively mitigate multipath and narrowband interference, the DS-MB-UWB system employs multiple sub-bands instead of a wide single band for data transmission. By using spreading chips with different duration settings, the SSBW can be manipulated. As a result, it is observed that increasing SSBW does not always improve system performance. Optimum SSBW values exist and are found to vary in accordance to different operating parameters such as the number of sub-bands and types of propagation channel model. Additionally, we have also found that system performance in the presence of narrowband interference is heavily dependent on the number of employed sub-bands.