A millimeter-wave radar receiver using a z-cut LiNbO3 optical modulator with orthogonal-gap-embedded patch-antennas on a low-k dielectric material is proposed. A millimeter-wave from a reflected radar signal can be received by the patch-antennas and converted directly to a lightwave through electro-optic modulation. A low-k dielectric material is used as a substrate for improving antenna gain. Additionally, an interaction length between millimeter-wave and lightwave electric fields becomes long. As a result, large modulation efficiency can be obtained, which is proportional to sensitivity of the millimeter-wave radar receiver. Optical millimeter-wave radar beam-forming can be obtained using the proposed device with meandering-gaps for controlling interaction between millimeter-wave and lightwave electric fields in electro-optic modulation. Analysis and experimentally demonstration of the proposed device are discussed and reported for 40GHz millimeter-wave bands. Optical millimeter-wave radar beam-forming in 2-D is also discussed.

We have proposed and developed new electro-optic modulators for the pre-equalization of signal distortion caused by the optical fiber chromatic dispersion effect. We found that the synthesis of an almost arbitrary impulse response function is obtainable by utilizing an electro-optic modulator composed of a Mach-Zehnder waveguide and travelling-wave electrodes on a ferro-electric material substrate with polarization-reversed structures. In this paper, the operational principle, design and simulation results of the pre-equalization modulator are presented. Some preliminary experimental results are also shown with future prospects.

We propose novel all-optical functional devices using waveguide X-junctions with localized third order optical nonlinearity, where one branch is made from a Kerr-like nonlinear material and the rest are made from linear ones. All-optical switching operations can be obtained because of bistable like nonlinear dispersion characteristics in linear and nonlinear coupled guided-wave systems. The performances of the devices are analyzed by the Beam Propagation Method (BPM) modified for nonlinear waveguides combined with the nonlinear normal mode analysis. The methods to construct the waveguides with localized nonlinearity are also discussed by utilizing the technologies for the selective control of a band-gap energy of semiconductor Multi Quantum Well (MQW) structures and the performances of the designed devices are presented.

We propose new electro-optic modulators using a double antenna-coupled electrode structure for radio-over-fiber systems. The proposed modulators are composed of a pair of patch antennas and a standing-wave resonant electrode. By utilizing a pair of patch antennas on SiO2 substrates and a coupled-microstrip line resonant electrode on a LiNbO3 substrate with a symmetric configuration, high-efficiency optical modulation is obtainable for 24 optical waveguides at the same time. The proposed modulators were designed at 58 GHz and their basic operations were demonstrated successfully with an improvement of 9 dB compared to a single antenna-coupled electrode device on a LiNbO3 substrate in our previous work.

We have developed an all-optical fiber link antenna measurement system for a millimeter wave 5th generation mobile communication frequency band around 28 GHz. Our developed system consists of an optical fiber link an electrical signal transmission system, an antenna-coupled-electrode electric-field (EO) sensor system for 28GHz-band as an electrical signal receiving system, and a 6-axis vertically articulated robot with an arm length of 1m. Our developed optical fiber link electrical signal transmission system can transmit the electrical signal of more than 40GHz with more than -30dBm output level. Our developed EO sensor can receive the electrical signal from 27GHz to 30GHz. In addition, we have estimated a far field antenna factor of the EO sensor system for the 28GHz-band using an amplitude center modified antenna factor estimation equation. The estimated far field antenna factor of the sensor system is 83.2dB/m at 28GHz.

This study investigates the improvement of the channel capacity of 5-GHz-band multiple-input multiple-output (MIMO) communication using microwave-guided modes propagating along a polyvinyl chloride (PVC) pipe wall for a buried pipe inspection robot. We design a planar Yagi-Uda antenna to reduce transmission losses in communication with PVC pipe walls as propagation paths. Coupling efficiency between the antenna and a PVC pipe is improved by attaching a PVC adapter with the same curvature as the PVC pipe's inner wall to the Yagi-Uda antenna to eliminate any gap between the antenna and the inner wall of the PVC pipe. The use of a planar Yagi-Uda antenna with a PVC adaptor decreases the transmission loss of a 5-GHz-band microwave signal propagating along a 1-m-lomg straight PVC pipe wall by 7dB compared to a dipole antenna. The channel capacity of a 2×2 MIMO system using planar Yagi-Uda antennas is more than twice that of the system using dipole antennas.

Quasi-phase-matching (QPM) electro-optic modulators using gap-embedded patch-antennas were proposed for improving wireless microwave-optical signal conversion. The proposed QPM devices can receive wireless microwave signals and convert them to optical signals directly. The QPM structures enable us to have twice antenna elements in the fixed device length. The device operations with improved conversion efficiency of 10 dB were experimentally demonstrated at a wireless signal frequency of 26 GHz. The proposed QPM devices were also tested to a wireless-over-fiber link.

We propose novel all-optical functional devices using waveguide X-junctions with localized third order optical nonlinearity, where one branch is made from a Kerr-like nonlinear material and the rest are made from linear ones. All-optical switching operations can be obtained because of bistable like nonlinear dispersion characteristics in linear and nonlinear coupled guided-wave systems. The performances of the devices are analyzed by the Beam Propagation Method (BPM) modified for nonlinear waveguides combined with the nonlinear normal mode analysis. The methods to construct the waveguides with localized nonlinearity are also discussed by utilizing the technologies for the selective control of a band-gap energy of semiconductor Multi Quantum Well (MQW) structures and the performances of the designed devices are presented.

A novel structure of a resonator type guided-wave electro-optic intensity modulator is introduced that uses a higher-order harmonic resonant electrode of coupled microstrip lines combined with polarization-reversed structure. The light modulation cancellation caused by the light transit-time effect in the resonant electrode, which is longer than the wavelength of the standing wave, is compensated for to enhance modulation efficiency. The modulator for 26 GHz operation was designed and fabricated with a LiTaO3 substrate. The modulation electrode is 9.03 mm long for seventh order harmonic resonance by RF signal. The workability of the modulator was confirmed by experiments with 1.3 µm wavelength light.

A new LiTaO3 electro-optic polarization modulator utilizing traveling-wave electrodes and a double periodic poling structure is proposed. Utilizing the double periodic poling structure, both quasi-phase matching between TE and TM guided-modes, and quasi-velocity matching between a lightwave and a modulation microwave are obtainable at modulation frequencies over 10 GHz.

This paper addresses the on-resistance (Ron) extraction of the DMOS based driver in Power IC designs. The proposed method can extract Ron of a driver from its layout data for the arbitrarily shaped metallization patterns. Such a driver is usually composed of arbitrarily shaped metals, arrayed vias, and DMOS transistors. We use FEM to extract the parasitic resistance of the source/drain metals since its strong contribution to Ron. In order to handle the large design case and accelerate the extraction process, a domain decomposition with virtual terminal insertion method is introduced, which succeeds in extraction for a set of industrial test cases including those the FEM without domain decomposition failed in. For a layout in which the DMOS cells are regularly placed, a sub-domain reuse procedure is also proposed, which obtained a dramatic speedup for the extraction. Even without the sub-domain reuse, our method still shows advantage in runtime and memory usage according to the simulation results.

A novel structure of guided-wave electro-optic modulators is proposed and their operation of the optical intensity modulation is successfully confirmed. The modulators use a newly developed modulation electrode consisting of coupled microstrip lines. A high voltage can be induced by the resonance of the odd propagation mode to realize efficient electro-optic modulation in spite of the microstrip-line configuration. The properties of the coupled microstrip lines were analytically evaluated by using the method of conformal transformations and the effectiveness as a modulation electrode was presented. The modulation electrodes of the half-wavelength coupled microstrip line resonator were designed at 10 GHz and 26 GHz, where the electrode lengths were 3 mm and 1.2 mm, respectively. The modulators using these electrodes with the Mach-Zehnder interferometer of LiTaO3 waveguides were fabricated. The measured modulation coefficient of the 26 GHz modulator normalized at 100 mW signal input was 0.13 rad.