In this letter, as a generalization of Heng's constructions in the paper [9], a construction of codebooks, which meets the Welch bound asymptotically, is proposed. The parameters of codebooks presented in this paper are new in some cases.

As IT systems, including network systems using SDN/NFV technologies, become large-scaled and complicated, the cost of system management also increases rapidly. Network operators have to maintain their workflow in constructing and consistently updating such complex systems, and thus these management tasks in generating system update plan are desired to be automated. Declarative system update with state space search is a promising approach to enable this automation, however, the current methods is not enough scalable to practical systems. In this paper, we propose a novel heuristic approach to greatly reduce computation time to solve system update procedure for practical systems. Our heuristics accounts for structural bottleneck of the system update and advance search to resolve bottlenecks of current system states. This paper includes the following contributions: (1) formal definition of a novel heuristic function specialized to system update for A* search algorithm, (2) proofs that our heuristic function is consistent, i.e., A* algorithm with our heuristics returns a correct optimal solution and can omit repeatedly expansion of nodes in search spaces, and (3) results of performance evaluation of our heuristics. We evaluate the proposed algorithm in two cases; upgrading running hypervisor and rolling update of running VMs. The results show that computation time to solve system update plan for a system with 100 VMs does not exceed several minutes, whereas the conventional algorithm is only applicable for a very small system.

The low-altitude target detection remains a difficult problem in MIMO radar. In this paper, we propose a novel adaptive two-step Bayesian generalized likelihood ratio test (TB-GLRT) detection algorithm for low-altitude target detection. By defining the compound channel scattering coefficient and applying the K distributed clutter model, the signal models for different radars in low-altitude environment are established. Then, aiming at the problem that the integrals are too complex to yield a closed-form Neyman-Pearson detector, we assume prior knowledge of the channel scattering coefficient and clutter to design an adaptive two-step Bayesian GLRT algorithm for low-altitude target detection. Monte Carlo simulation results verify that the proposed detector has better performance than the square law detector, GLRT detector or Bayesian GLRT detector in low-altitude environment. With the TB-GLRT detector, the maximum detection probability can reach 70% when SNR=0dB and ν=1. Simulations also verify that the multipath effect shows positive influence on detection when SNR<5dB, and when SNR>10dB, the multipath effect shows negative influence on detection. When SNR>0dB, the MIMO radar, which keeps a detection probability over 70% with the proposed algorithm, has the best detection performance. Besides, the detection performance gets improved with the decrease of sea clutter fluctuation level.

We investigate enumeration of distinct flat-foldable crease patterns under the following assumptions: positive integer n is given; every pattern is composed of n lines incident to the center of a sheet of paper; every angle between adjacent lines is equal to 2π/n; every line is assigned one of “mountain,” “valley,” and “flat (or consequently unfolded)”; crease patterns are considered to be equivalent if they are equal up to rotation and reflection. In this natural problem, we can use two well-known theorems for flat-foldability: the Kawasaki Theorem and the Maekawa Theorem in computational origami. Unfortunately, however, they are not enough to characterize all flat-foldable crease patterns. Therefore, so far, we have to enumerate and check flat-foldability one by one using computer. In this study, we develop the first algorithm for the above stated problem by combining these results in a nontrivial way and show its analysis of efficiency.

Many users are exposed to threats of drive-by download attacks through the Web. Attackers compromise vulnerable websites discovered by search engines and redirect clients to malicious websites created with exploit kits. Security researchers and vendors have tried to prevent the attacks by detecting malicious data, i.e., malicious URLs, web content, and redirections. However, attackers conceal parts of malicious data with evasion techniques to circumvent detection systems. In this paper, we propose a system for detecting malicious websites without collecting all malicious data. Even if we cannot observe parts of malicious data, we can always observe compromised websites. Since vulnerable websites are discovered by search engines, compromised websites have similar traits. Therefore, we built a classifier by leveraging not only malicious but also compromised websites. More precisely, we convert all websites observed at the time of access into a redirection graph and classify it by integrating similarities between its subgraphs and redirection subgraphs shared across malicious, benign, and compromised websites. As a result of evaluating our system with crawling data of 455,860 websites, we found that the system achieved a 91.7% true positive rate for malicious websites containing exploit URLs at a low false positive rate of 0.1%. Moreover, it detected 143 more evasive malicious websites than the conventional content-based system.

Lane detection or road detection is one of the key features of autonomous driving. In computer vision area, it is still a very challenging target since there are various types of road scenarios which require a very high robustness of the algorithm. And considering the rather high speed of the vehicles, high efficiency is also a very important requirement for practicable application of autonomous driving. In this paper, we propose a deep convolution neural network based lane detection method, which consider the lane detection task as a pixel level segmentation of the lane markings. We also propose an automatic training data generating method, which can significantly reduce the effort of the training phase. Experiment proves that our method can achieve high accuracy for various road scenes in real-time.

This paper presents a novel delta-sigma modulator that uses a switched-capacitor (SC) integrator with the structure of a finite impulse response (FIR) filter in a loop filter configuration. The delta-sigma analog-to-digital converter (ΔΣADC) is used in various conversion systems to enable low-power, high-accuracy conversion using oversampling and noise shaping. Increasing the gain coefficient of the integrator in the loop filter configuration of the ΔΣADC suppresses the quantization noise that occurs in the signal band. However, there is a trade-off relationship between the integrator gain coefficient and system stability. The SC integrator, which contains an FIR filter, can suppress quantization noise in the signal band without requiring an additional operational amplifier. Additionally, it can realize a higher signal-to-quantization noise ratio. In addition, the poles that are added by the FIR filter structure can improve the system's stability. It is also possible to improve the flexibility of the pole placement in the system. Therefore, a noise transfer function that does not contain a large gain peak is realized. This results in a stable system operation. This paper presents the essential design aspects of a ΔΣADC with an FIR filter. Two types of simulation results are examined for the proposed first- and second-order, and these results confirm the effectiveness of the proposed architecture.

Two-dimensional (2-D) maximally flat finite impulse response (FIR) digital filters have flat characteristics in both passband and stopband. 2-D maximally flat diamond-shaped half-band FIR digital filter can be designed very efficiently as a special case of 2-D half-band FIR filters. In some cases, this filter would require the reduction of the filter lengths for one of the axes while keeping the other axis unchanged. However, the conventional methods can realize such filters only if difference between each order is 2, 4 and 6. In this paper, we propose a closed-form frequency response of 2-D low-pass maximally flat diamond-shaped half-band FIR digital filters with arbitrary filter orders. The constraints to treat arbitrary filter orders are firstly proposed. Then, a closed-form transfer function is achieved by using Bernstein polynomial.

A diversity strategy is efficient to reduce the fluctuation of communication quality caused by fading. In order to further maintain the communication quality and improve the communication capacity, this paper proposes a two-dimensional diversity approach by serially-concatenating spectral precoding and power normalized-differential space time block coding (PN-DSTBC). Spectral precoding is able to take benefit from a frequency diversity effect without loss in spectral efficiency. In addition, PN-DSTBC is robust against serious phase noise in an extremely high frequency (EHF) band by exploiting a spatial diversity effect. However, there is a problem that a naive concatenation degrades the performance due to the imbalance of equivalent noise variances over transmit frequencies. Thus, we examine an equalized PN-DSTBC decoder as a modified approach to uniform equivalent noise variances over frequencies. The performance evaluation using computer simulations shows that the proposed modified approach yields the performance improvement at any modulation schemes and at any number of transmit frequencies. Furthermore, in the case of 64QAM and two transmit frequencies, the performance gain of the modified approach is 4dB larger than that of PN-DSTBC only at uncoded BER=10-4.

We formulate the design of an optimal quantizer as an optimization problem that finds the quantization indices that minimize quantization error. As a solution of the optimization problem, an approach based on dynamic programming, which is called DP quantization, is proposed. It is observed that quantized signals do not always contain all kinds of signal values which can be represented with given bit-depth. This property is called amplitude sparseness. Because quantization is the amplitude discretization of signal value, amplitude sparseness is closely related to quantizer design. Signal values with zero frequency do not impact quantization error, so there is the potential to reduce the complexity of the optimal quantizer by not computing signal values that have zero frequency. However, conventional methods for DP quantization were not designed to consider amplitude sparseness, and so fail to reduce complexity. The proposed algorithm offers a reduced complexity optimal quantizer that minimizes quantization error while addressing amplitude sparseness. Experimental results show that the proposed algorithm can achieve complexity reduction over conventional DP quantization by 82.9 to 84.2% on average.

A class of multimodulus algorithms (MMA(p)) optimized by an optimal step-size (OS) for blind equalization are firstly investigated in this letter. The multimodulus (MM) criterion is essentially a split cost function that separately implements the real and imaginary part of the signal, hence the phase can be recovered jointly with equalization. More importantly, the step-size leading to the minimum of the MM criterion along the search direction can be obtained algebraically among the roots of a higher-order polynomial at each iteration, thus a robust optimal step-size multimodulus algorithm (OS-MMA(p)) is developed. Experimental results demonstrate improved performance of the proposed algorithm in mitigating the inter-symbol interference (ISI) compared with the OS constant modulus algorithm (OS-CMA). Besides, the computational complexity can be reduced by the proposed OS-MMA(2) algorithm.

This paper deals with the minimum and maximum value distributions based on the n-variate FGM copula with one dependence parameter. The ranges of dependence parameters are theoretically determined so that the probability density function always takes a non-negative value. However, the closed-form conditions of the ranges for the dependence parameters have not been known in the literature. In this paper, we newly provide the necessary conditions of the ranges of the dependence parameters for the minimum and maximum value distributions which are derived from FGM copula, and show the asymptotic properties of the ranges.

One of essential requirements for the next generation communications is to support higher spectral efficiency (SE) and energy efficiency (EE) than the existing communication system. For increasing the SE, carrier aggregation (CA) has received great attention. In this paper, we propose an energy efficient smart crest factor reduction (E2S-CFR) method for increasing the EE while satisfying the required SE when the CA is applied. The proposed E2S-CFR exploits different weights on each carrier according to the required error vector magnitude (EVM), and efficiently reduces the peak to average power ratio (PAR). Consequently, we can reduce the bias voltage of a power amplifier, and it leads to save total consumed energy. Through performance evaluation, we demonstrate that the proposed E2S-CFR improves the EE by 11.76% compared to the existing schemes.

As an emerging and promising technique, device-free localization (DFL) has drawn considerable attention in recent years. By exploiting the inherent spatial sparsity of target localization, the compressive sensing (CS) theory has been applied in DFL to reduce the number of measurements. In practical scenarios, a prior knowledge about target locations is usually available, which can be obtained by coarse localization or tracking techniques. Among existing CS-based DFL approaches, however, few works consider the utilization of prior knowledge. To make use of the prior knowledge that is partly or erroneous, this paper proposes a novel faulty prior knowledge aided multi-target device-free localization (FPK-DFL) method. It first incorporates the faulty prior knowledge into a three-layer hierarchical prior model. Then, it estimates location vector and learns model parameters under a variational Bayesian inference (VBI) framework. Simulation results show that the proposed method can improve the localization accuracy by taking advantage of the faulty prior knowledge.

With the development of spaceborne synthetic aperture radar (SAR), ultra-high spatial resolution has become a hot topic in recent years. The system with high spatial resolution requests large range bandwidths and long azimuth integration time. However, due to the long azimuth integration time, many problems arise, which cannot be ignored in the operational ultra-high resolution spotlight mode. This paper investigates two critical issues that need to be noticed for the full-aperture processing of ultra-high resolution spaceborne SAR spotlight data. The first one is the inaccuracy of the traditional hyperbolic range model (HRM) when the system approaches decimeter range resolution. The second one is the azimuth spectral folding phenomenon. The problems mentioned above result in significant degradation of the focusing effect. Thus, to solve these problems, a full-aperture processing scheme is proposed in this paper which combines the superiorities of two generally utilized processing algorithms: the precision of one-step motion compensation (MOCO) algorithm and the efficiency of modified two-step processing approach (TSA). Firstly, one-step MOCO algorithm, a state-of-the-art MOCO algorithm which has been applied in ultra-high resolution airborne SAR systems, can precisely correct for the error caused by spaceborne curved orbit. Secondly, the modified TSA can avoid the phenomenon of azimuth spectrum folding effectively. The key point of the modified TSA is the deramping approach which is carried out via the convolution operation. The reference function, varying with the instantaneous range frequency, is adopted by the convolution operation for obtaining the unfolding spectrum in azimuth direction. After these operations, the traditional wavenumber domain algorithm is available because the error caused by spaceborne curved orbit and the influence of the spectrum folding in azimuth direction have been totally resolved. Based on this processing scheme, the ultra-high resolution spaceborne SAR spotlight data can be well focused. The performance of the full-aperture processing scheme is demonstrated by point targets simulation.

Radar-absorbent materials (RAM) with various characteristics, such as broadband, oblique-incidence, and polarization characteristics, have been developed according to applications in recent years. This paper presents the optimized design method of two flat layers RAM with both broadband and oblique-incidence characteristics for the required RAM performance. The oblique-incidence characteristics mean that the RAM is possible to absorb radio waves continuously up to the maximum incidence angle. The index of the wave-absorption amount is 20dB, corresponding to an absorption rate of 99%. Because determination of the electrical material constant of each layer is the most important task with respect to the received frequency and the incidence angle, we optimized the values by using Non-dominated sorting genetic algorithm-II (NSGA-II). Two types of flat-layer RAM composed of dielectric and magnetic materials were designed and their characteristics were evaluated. Consequently, it was confirmed that oblique-incidence characteristics were better for the RAM composed of dielectric materials. The dielectric RAM achieved an incidence angle of up to 60° with broadband characteristics and a relative bandwidth of 77.01% at the transverse-magnetic (TM) wave incidence. In addition, the magnetic RAM could lower the minimum frequency of the system more than the dielectric RAM. The minimum frequency of the magnetic RAM was 1.38GHz with a relative bandwidth of 174.18% at TM-wave incidence and an incidence angle of 45°. We confirmed that it is possible to design RAM with broadband characteristics and continuous oblique-incidence characteristics by using the proposed method.

Deep neural networks (DNNs) have achieved significant success in the field of automatic speech recognition. One main advantage of DNNs is automatic feature extraction without human intervention. However, adaptation under limited available data remains a major challenge for DNN-based systems because of their enormous free parameters. In this paper, we propose a filterbank-incorporated DNN that incorporates a filterbank layer that presents the filter shape/center frequency and a DNN-based acoustic model. The filterbank layer and the following networks of the proposed model are trained jointly by exploiting the advantages of the hierarchical feature extraction, while most systems use pre-defined mel-scale filterbank features as input acoustic features to DNNs. Filters in the filterbank layer are parameterized to represent speaker characteristics while minimizing a number of parameters. The optimization of one type of parameters corresponds to the Vocal Tract Length Normalization (VTLN), and another type corresponds to feature-space Maximum Linear Likelihood Regression (fMLLR) and feature-space Discriminative Linear Regression (fDLR). Since the filterbank layer consists of just a few parameters, it is advantageous in adaptation under limited available data. In the experiment, filterbank-incorporated DNNs showed effectiveness in speaker/gender adaptations under limited adaptation data. Experimental results on CSJ task demonstrate that the adaptation of proposed model showed 5.8% word error reduction ratio with 10 utterances against the un-adapted model.

This letter proposes a comprehensive assessment of the mission-level damage caused by cyberattacks on an entire defense mission system. We experimentally prove that our method produces swift and accurate assessment results and that it can be applied to actual defense applications. This study contributes to the enhancement of cyber damage assessment with a faster and more accurate method.

A novel time-series relationship among four consecutive real-valued single-tone sinusoid samples is proposed based on their linear prediction property. In order to achieve unbiased frequency estimates for a real sinusoid in white noise, based on the proposed four-point time-series relationship, a constrained least squares cost function is minimized based on the unit-norm principle. Closed-form expressions for the variance and the asymptotic expression for the variance of the proposed frequency estimator are derived, facilitating a theoretical performance comparison with the existing three-point counterpart, called as the reformed Pisarenko harmonic decomposer (RPHD). The region of performance advantage of the proposed four-point based constrained least squares frequency estimator over the RPHD is also discussed. Computer simulations are conducted to support our theoretical development and to compare the proposed estimator performance with the RPHD as well as the Cramer-Rao lower bound (CRLB).

In this letter, we propose a new blind source separation method, independent low-rank matrix analysis based on generalized Kullback-Leibler divergence. This method assumes a time-frequency-varying complex Poisson distribution as the source generative model, which yields convex optimization in the spectrogram estimation. The experimental evaluation confirms the proposed method's efficacy.