A 60 GHz direct conversion transceiver which employs amplitude/phase imbalance cancellation technique is newly proposed. By using the proposed technique, the receive path of the transceiver achieves less than 0.2 dB of amplitude error and less than 3 of phase error at 60 GHz bands over a 10 GHz bandwidth, which relaxes the design accuracy required for baluns used in the transceiver. It also employs a simple and fast calibration algorithm to adjust the locking range of the divide-by-3 injection locked divider in the phase locked loop. Fabricated in 90 nm CMOS technology, the transceiver achieves a low power consumption of 230 mW in transmit mode and 173 mW in receive mode. The output spectrum of 1.76 Gsps π/2-BPSK/QPSK modulation shows the excellent distortion and spurious suppression that meet the IEEE802.11ad draft standard.

The need for the OpenGL-family of the 3D rendering API's are highly increasing, especially for graphical human-machine interfaces on various systems. In the case of safety-critical market for avionics, military, medical and automotive applications, OpenGL SC, the safety critical profile of the OpenGL standard plays the major role for graphical interfaces. In this paper, we present an efficient way of implementing OpenGL SC 3D graphics API for the environments with hardware-supported OpenGL 1.1 and its multi-texture extension facility, which is widely available on recent embedded systems. Our approach achieved the OpenGL SC features at the low development cost on the embedded systems and also on general personal computers. Our final result shows its compliance with the OpenGL SC standard specification. From the efficiency point of view, we measured its execution times for various application programs, to show a remarkable speed-up.

Sensor deployment to achieve better system performance is one of the critical issues in wireless sensor networks (WSN). This letter proposes an effective sensor deployment scheme for large area sensor networks, where the event occurrence rate varies over the sensor-deployed region. Based on local event occurrence rate, the proposed scheme determines the number of sensors that should be deployed in each local region to maximize the overall detection probability. Simulation results show that the sensor deployment by the proposed scheme improves detection capability by 21% in comparison to the Incidence algorithm.

This paper presents a Microscopic Local Binary Pattern (MLBP) for texture classification. The conventional LBP methods which rely on the uniform patterns discard some texture information by merging the nonuniform patterns. MLBP preserves the information by classifying the nonuniform patterns using the structure similarity at microscopic level. First, the nonuniform patterns are classified into three groups using the macroscopic information. Second, the three groups are individually divided into several subgroups based on the microscopic structure information. The experiments show that MLBP achieves a better result compared with the other LBP related methods.

In this letter, we consider a control problem of a chain of integrators by output feedback under sensor noise. First, we introduce a measurement output feedback controller which drives all states and output of the considered system to arbitrarily small bounds. Then, we suggest a measurement output feedback controller coupled with a switching gain-scaling factor in order to improve the transient response and retain the same arbitrarily small ultimate bounds as well. An example is given to show the advantage of the proposed control method.

Electromagnetic wave scattering in two open-ended coaxial cables with flanges is presented for adiabatic transmission line applications. Field distributions in the cables are obtained by employing the mode-matching method. A set of simultaneous equations is solved to investigate the transmission and reflection coefficients.

We investigate the impact of traffic on the performance of large-scale NAT (LSN), since it has been attracting attention as a means of better utilizing the limited number of global IPv4 addresses. We focus on the number of active flows because they drive up the LSN memory requirements in two ways; more flows must be held in LSN memory, and more global IPv4 addresses must be prepared. Through traffic measurement data analysis, we found that more than 1% of hosts generated more than 100 TCP flows or 486 UDP flows at the same time, and on average, there were 1.43-3.99 active TCP flows per host, when the inactive timer used to clear the flow state from a flow table was set to 15 s. When the timer is changed from 15 s to 10 min, the number of active flows increases more than tenfold. We also investigate how to reduce the above impact on LSN in terms of saving memory space and accommodating more users for each global IPv4 address. We show that to save memory space, regulating network anomalies can reduce the number of active TCP flows on an LSN by a maximum of 48.3% and by 29.6% on average. We also discuss the applicability of a batch flow-arrival model for estimating the variation in the number of active flows, when taking into account that the variation is needed to prepare an appropriate memory space. One way to allow each global IPv4 address to accommodate more users is to better utilize destination IP address information when mapping a source IP address from a private address to a global IPv4 address. This can effectively reduce the required number of global IPv4 addresses by 85.9% for TCP traffic and 91.9% for UDP traffic on average.

This letter presents a robust receiver using the generalized sidelobe canceller aided with the high-order derivative constraint technique for multicarrier code-division multiple-access (MC-CDMA) uplink against carrier frequency offset (CFO). Numerical results demonstrate the efficacy of the proposed receiver.

The impact and benefits of infrastructure support are shown by introducing an achievable throughput scaling law of a ultra-wide band (UWB) ad hoc network in which m base stations (BSs) are regularly located. The existing multi-hop scheme consisting of two variants, with and without BS help, is utilized with a slight modification. Our result indicates that the derived throughput scaling depends on the path-loss exponent due to the power-limited characteristics for all operating regimes examined. Furthermore, it is shown that the total throughput scales linearly with parameter m as m is larger than a certain level. It thus turns out the use of infrastructure is also helpful in improving the throughput scaling of UWB networks in some conditions.

In this letter, we propose a framework for scalable video multicast, which exploits the scalability of scalable video and the multiuser diversity of OFDMA systems. We further propose a resource allocation algorithm which guarantees the base-quality video for all users, and improves the transmission efficiency for users with good channel conditions.

Silver electrical contacts are separated at constant speed and break arcs are generated in a DC100 V–450 V/10 A resistive circuit. The transverse magnetic field of a permanent magnet is applied to the break arcs. Dependences of the arc duration, arc dwell time and arc lengthening time on the strength of the magnetic field and supply voltage are investigated. The characteristics of the re-ignition of the break arc are also discussed. Following results are shown. The arc duration D is increased due to the increase of the arc lengthening time tm when the supply voltage E is increased for each magnetic flux density Bx, because the arc dwell time ts is almost constant. The arc duration D is increased due to the increase of both of the arc lengthening time tm and the arc dwell time ts when the magnetic flux density Bx is decreased. The arc lengthening time tended to become long when the re-ignition of the break arc is occurred. The lengthening time tends to become longer when the duration tm1 from the start of the arc lengthening to the start of the re-ignition is increased. Re-ignitions occurred frequently when the magnetic flux density of the transverse magnetic field is increased and the supply voltage is increased.

A novel watermarked MDC system based on the SFQ algorithm and the sub-sampling method is proposed in this paper. Sub-sampling algorithm is applied onto the transformed image to introduce some redundancy between different channels. Secret information is embedded into the preprocessed sub-images. Good performance of the new system to defense the noise and the compression attacks is shown in the experimental results.

Recently, Lee et al. [Y. Lee, E. Kim, S. Seok, and M. Jung, A smartcard-based user authentication scheme to ensure the PFS in multi-server environments, IEICE Transactions on Communications, vol.E95-B, no.2, pp.619–622, 2012] proposed a smartcard-based user authentication scheme for multi-server environments. They claimed that their scheme could withstand various attacks and provide the perfect forward secrecy (PFS). However, in this letter, we will point out that their scheme is vulnerable to three kinds of attacks and cannot provide the PFS.

A Superconcentrator is a directed acyclic graph with specific properties. The existence of linear-sized supercentrator has been proved in [4]. Since then, the size has been decreased significantly. The best known size is 28N which is proved by U. Schöning in [8]. Our work follows their construction and proves a smaller size superconcentrator.

Discrete-Time fractional Brownian motion (DFBM) and its increment process, called discrete-time fractional Gaussian noise (DFGN), are usually used to describe natural and biomedical phenomena. These two processes are dominated by one parameter, called the Hurst exponent, which needs to be estimated in order to capture the characteristics of physical signals. In the previous work, a variance estimator for estimating the Hurst exponent directly via DFBM was provided, and it didn't consider point selection for linear regression. Since physical signals often appear to be DFGN-type, not DFBM-type, it is imperative to first transform DFGN into DFBM in real applications. In this paper, we show that the variance estimator possesses another form, which can be estimated directly via the autocorrelation functions of DFGN. The above extra procedure of transforming DFGN into DFBM can thus be avoided. On the other hand, the point selection for linear regression is also considered. Experimental results show that 4-point linear regression is almost optimal in most cases. Therefore, our proposed variance estimator is more efficient and accurate than the original one mentioned above. Besides, it is also superior to AR and MA methods in speed and accuracy.

The wireless sensor network (WSN) is a technology that senses environmental information and provides appropriate services to users. There are diverse application areas for WSNs such as disaster prevention, military, and facility management. Despite the many prospective applications, WSN s are vulnerable to various malicious attacks. In false report attacks, a malicious attacker steals a few sensor nodes and obtains security materials such as authentication keys from the nodes. The attacker then injects false event reports to the network through the captured nodes. The injected false reports confuse users or deplete the limited energy of the nodes in the network. Many filtering schemes have been proposed to detect and remove false reports. In the statistical en route filtering (SEF) scheme, each node shares authentication keys selected from a global key pool. Due to the limited memory, each node is able to store only a small portion of the global key pool. Therefore, the routing paths of the event reports significantly affect the filtering (i.e., detecting) probability of false reports. In this paper, we propose a method to determine the routing paths of event reports both hop by hop and on demand at each node. In this method, each node chooses the next node on the path from the event source to the sink node based on the key indexes of its neighbor nodes. Experiments show that the proposed method is far more energy efficient than the SEF when the false traffic ratio (FTR) is ≥ 50% in the network.

This letter proposes a monopole multi-sector antenna with dielectric cylinder, and shows some results of simulations that examined the antenna characteristics. The dependency of radiation characteristics on relative permittivity εr shows the lens effect with increase of εr. Furthermore, the characteristics of the proposed antenna are improved by optimizing the termination conditions at the quiescent antennas. The backlobe level is lower than -10 dB. Also, the vertical HPBW and the conical HPBW are around 70.5° and 63.4°, respectively. The optimization improved the actual gain by 2 dB. It is found that the diameter of the proposed antenna is 1/3rd that of the conventional one.

This paper evaluates the delay of the issue queue in a superscalar processor to aid microarchitectural design, where quick quantification of the complexity of the issue queue is needed to consider the tradeoff between clock cycle time and instructions per cycle. Our study covers two aspects. First, we introduce banking tag RAM, which comprises the issue queue, to reduce the delay. Unlike normal RAM, this is not straightforward, because of the uniqueness of the issue queue organization. Second, we explore and identify the correct critical path in the issue queue. In a previous study, the critical path of each component in the issue queue was summed to obtain the issue queue delay, but this does not give the correct delay of the issue queue, because the critical paths of the components are not connected logically. In the evaluation assuming 32-nm LSI technology, we obtained the delays of issue queues with eight to 128 entries. The process of banking tag RAM and identifying the correct critical path reduces the delay by up to 20% and 23% for 4- and 8-issue widths, respectively, compared with not banking tag RAM and simply summing the critical path delay of each component.

The circuit switching device by the electrical contact needs the high reliability and long lifetime. The very important factor for the high reliability, long lifetime and electromagnetic noise of the electrical contact is to suppress the duration and electromagnetic noise of arc discharge. Usually, the suppression of arc duration method is applying the external magnetic field. But, this method was not able to suppress the metallic arc duration and increased the voltage fluctuation at arc duration. Therefore, the new method for suppressing the duration and noise for electrical contact is expected. In this paper, a new method for suppressing duration and EM noise of arc discharge by applying housing pressure is proposed. To investigate the availability of proposed method, the measurement and some considerations on arc duration, voltage-fluctuation and current noise up to GHz frequency band generated by breaking contact in the applied pressure relay housing are reported. Firstly, voltage waveform and duration of the arc are measured. The effects of the pressure in the relay housing on the duration of the metallic and gaseous phase arcs are discussed. Secondary, voltage fluctuation, the spectrogram of contact voltage and current noise up to GHz frequency band are discussed. In the results, the proposed method with applying pressure makes shorter both durations of metallic and gaseous phases. The shorter duration of metallic phase is an advantage of the proposed method beyond the applying external magnetic field. As the housing pressure is increase, the voltage fluctuation and current noise becomes smalls. The proposed method can suppress the voltage fluctuation as well as arc duration. Consequently, the proposed method is on of the good solution to suppress the duration and electromagnetic noise of the arc discharge from electrical contact and result of this study indicates the basic considerations necessary to ensure good lifetime and EMC designs for electrical contacts.

An injection locked coupled push-push 3-oscillators array using unilateral coupling circuits is proposed. The circuit consists of unit oscillators and coupling circuits. For the unit oscillator, a dual-band push-push oscillator which generates the fundamental signal (f0) and the second harmonic signal (2f0) is adopted. The output signal of the oscillator array is the second harmonic signal. The fundamental signal is used for the injection signal to synchronize oscillators. These adjoining unit oscillators are connected by the coupling circuits. The coupling circuit is composed of a buffer amplifier and a phase shifter. Due to the advantage of the push-push oscillator, the phase shift between the adjoining oscillators is twice as large as that of the phase shift in the coupling circuit. The oscillator array is designed in Ku-band. Three push-push oscillators are arrayed and include two coupling circuits which are designed and fabricated. The phase shift of 190.0 degrees between the adjoining unit oscillators is demonstrated.