We propose a new network architecture nemed Holonic Network for personalized multimedia communications, which is characterized by distributed cooperative networking based on autonomous management and all-optical transport networks. We than propose autonomous routing method. Moreover, an information searching method and a route generation method with network maps, which are essential for this network, are proposed. Lastly, we evaluate the proposed network performance by theoretical analysis and system emulation.

Narrow-band ISDN services may experience nonstationary traffic conditions. Therefore, switch design should take account of these conditions. We propose new performance measures for switching systems and describe a traffic model, which is a mixture of stationary Poissonian traffic and momentarily focused traffic. On the basis of this model, performance measures are determined so as to satisfy grade of service requirements that are in effect during some short interval after the momentarily focused traffic enters the system. We also propose an overload control scheme that uses these new performance measures. Finally, we show practical and numerical examples for the performance measures and overload control scheme.

Resonance characteristics of a coupled dielectric resonator which consists of a Whispering Gallery mode dielectric disk resonator and a ring resonator located eccentrically are analyzed. New analytical results of resonance characteristic based on the distributed coupling phenomena between the disk and the ring are obtained. The resonance performances have also been verified experimentally on X band model. We have found that Free Spectral Range of the coupled resonator is several times larger than that of the single disk resonator and the single ring resonator, respectively. As a result, the eccentric coupled resonator discussed in this paper can be used as a frequency selective element in millimeter wave integrated circuits.

A new structure for adaptive AR spectral estimation based on multi-band decomposition of the linear prediction error is introduced and the mathematical background for the soulution of the related adaptive filtering problem is derived. The presented structure gives rise to AR spectral estimates that represent the true underlying spectrum with better fidelity than conventional LS methods by allowing an arbitrary trade-off between variance of spectral estimates and tracking ability of the estimator along the frequency spectrum. The linear prediction error is decomposed through a filter bank and components of each band are analyzed by different window lengths, allowing long windows to track slowly varying signals and short windows to observe fastly varying components. The correlation matrix of the input signal is shown to satisfy both time-update and order-update properties for rectangular windowing functions, and an RLS algorithm based on each property is presented. Adaptive forward and backward relations are used to derive a mathematical framework that serves as a basis for the design of fast RLS alogorithms. Also, computer experiments comparing the performance of conventional and the proposed multi-band methods are depicted and discussed.

The status of the plastic optical fiber (POF) for high-speed data communication is described. Very recently, the low-loss and high-bandwidth perfluorinated GI POF which has no serious absorption loss from visible to 1.3-µm wavelength was successfully prepared at Keio University. Since the core diameter (300-1000 µm) of the GI POF is much larger than that of the multimode silica fiber (62.5 µm), the serious modal noise in the conventional multimode silica fiber was virtually eliminated, resulting in stable giga bit order data transmission with inexpensive couplers and connectors.

This paper proposes a novel M-ary FSK demodulation scheme using the Short Time Discrete Fourier Transform (ST-DFT) analysis named Frequency Sequence Estimation (FSE) for low earth orbit (LEO) satellite-based personal multimedia communications. The FSE is a kind of the Viterbi algorithm, searching for the maximum likely frequency path using the instantaneous ST-DFT output as a metric. It is based on the fact that the discrete time-frequency representation of the received signal can be interpreted as a trellis diagram. The proposed method has the excellent transmission performance and spectral efficiency, as well as its own hardware simplicity and frequency offset insensitivity.

This paper presents a method of multiple fault diagnosis in sequential circuits by input-sequence pairs having sensitizing input pairs. We, first, introduce an input-sequence pair having sensitizing input pairs to diagnose multiple faults in a sequential circuit represented by a combinational array model. We call such input-sequence pair the sensitizing sequence pair in this paper. Next, we describe a diagnostic method for multiple faults in sequential circuits by the sensitizing sequence pair. From a relation between a sensitizing path generated by a sensitizing sequence pair and a subcircuit, the proposed method deduces the suspected faults for the subcircuits, one by one, based on the responses observed at primary outputs without probing any internal line. Experimental results show that our diagnostic method identifies fault locations within small numbers of suspected faults.

This paper describes how to effectively use discriminative training based on Minimum Classification Error (MCE) criterion for a small amount of data in order to attain the highest level of recognition performance. This method is a combination of MCE training and Vector-Field-Smoothed Bayesian learning called MAP/VFS, which combines maximum a posteriori (MAP) estimation with Vector Field Smoothing (VFS). In the proposed method, MAP/VFS can significantly enhance MCE training in the robustness of acoustic modeling. In model training, MCE training is performed using the MAP/VFS-trained model as an initial model. The same data are used in both trainings. For speaker adaptation using several dozen training words, the proposed method has been experimentally proven to be very effective. For 50-word training data, recognition errors are drastically reduced by 47% compared with 16.5% when using only MCE. This high rate, in which 39% is due to MAP, an additional 4% is due to VFS, and a further improvement of 4% is due to MCE, can be attained by enhancing MCE training capability by MAP/VFS.

In this paper, a multiuser receiver using a Hopfield network (Hopfield network receiver) for asynchronous codedivision multiple-access systems is proposed. We derive a novel likelihood function for the optimum demodulation of a data subsequence whose length is far shorter than that of the entire transmitted data sequence. It is shown that a novel Hopfield network receiver can be derived by exploiting the likelihood function, and the derived receiver leads to a low complexity receiver. The structure of the proposed receiver consists of a bank of correlators and a Hopfield network where the number of units is proportional to both the number of users and the length of a data sequence demodulated at a time. Computer simulation results are presented to compare the performance of the proposed receiver with those of the conventional multiuser detectors. It is shown that the proposed receiver significantly outperforms the correlation receiver, decorrelating detector and multistage detector, and provides suboptimum performnace.

A requirement specification acquisition method combined with hypothesis-based reasoning and model reasoning is proposed for obtaining service specifications from the ambiguous and/or incomplete requirement specifications of communications services. Errors at an early stage of software development cost more to debug than those at a later stage. Specification acquisition is the most upstream development process. Nevertheless, the system support for specification acquisition is delayed compared with other development phases.' Users do not always have precise requirements. It is therefore inevitable that user requirements contain ambiguities, insufficiencies and even contradictions. Considering this, it is indispensable to support a specification completion method that derives service specifications from such problem requirements. This paper proposes a combined method to obtain consistent and complete specifications from such problem requirements. Communications service specifications can be described by specifying terminal behaviors which can be recognized from outside the communications system(s). Such specifications are described by a rule-based language. Requirement specifications usually have components that are ambiguous, incomplete, or even contradictory. They appear as rule description and/or missing rules. From such requirements, service specifications are obtained by using hypothesis-based reasoning on input requirements and existing service specifications. When existing specifications cannot be used to obtain complementary specifications, a communications service model is used to propose new rules. The proposed methods are implemented as a part of a communications software development system. The system enables non-experts in communications systems to define their own service specifications.

In this paper, we propose a clustering based linear ordering algorithm which consists of global ordering and local ordering. In the global ordering, the algorithm forms clusters from n given vertices and orders the clusters. In the local ordering, the elements in each cluster are linearly ordered. The linear order, thus produced, is used to obtain optimal κ-way partitioning based on scaled cost objective function. When the number of cluster is one, the proposed algorithm is exactly the same as MELO [2]. But the proposed algorithm has more global partitioning information than MELO by clustering. Experiment with 11 benchmark circuits for κ-way (2 κ 10) partitioning shows that the proposed algorithm yields an average of 10.6% improvement over MELO [2] for the κ-way scaled cost partitioning.

In this paper we propose a direct sequence spread spectrum (DS/SS) modulation method which employs Gaussian-filtered minimum shift keying (GMSK) and permits simple code acquisition. A transmitter which includes a conventional GMSK modulator and pseudo-noise (PN) code generator can achieve the proposed modulation method. The received signal can be demodulated by four-phase correlator which can obtain the correlation value of received signal even if phase difference exists between the transmitter and the receiver. The modulation method employs phase-shift-keying (PSK) by modulating the phase of transmitted PN code for data transmission. We carried out hardware experiments and the measured bit error performance ensures the validity of this modulation method. Then we designed and developed a demodulator LSI which is applicable to a modulation method such as the DS/GMSK/PSK. The LSI is suitable for demodulation of spreadspectrum signal which can be demodulated by four-phase correlator.

In outdoor fields such as construction, mining and agriculture, there is an increasing demand for autonomous vehicles to reduce labor costs. Also, a positioning system is one key technology required for autonomous vehicle systems. For the purpose of expanding the potential of millimeter-wave applications, we have developed a positioning system in the 77-79 GHz frequency band, using the hyperbolic radio navigation method. This system operates in a restricted area with a radius of about a few hundred meters. A spread spectrum with a PN code is used as the ranging signals. We realized about 0.1 m in positioning accuracy.

In this paper, a new spectral subtraction technique with two microphone inputs is proposed. In conventional spectral subtraction using a single microphone, the averaged noise spectrum is subtracted from the observed short-time input spectrum. This results in reduction of mean value of noise spectrum only, the component varying around the mean value remaining intact. In the method proposed in this paper, the short-time noise spectrum excluding the speech component is estimated by introducing the blocking matrix used in the Griffiths-Jim-type adaptive beamformer with two microphone inputs, combined with the spectral compensation technique. By subtracting the estimated short-time noise spectrum from the input spectrum, not only the mean value of the noise spectrum but also the component varying around the mean value can be reduced. This method can be interpreted as a partial construction of the adaptive beamformer where only the amplitude of the short-time noise spectrum is estimated, while the adaptive beamformer is equivalent to the estimator of the complex short-time noise spectrum. By limiting the estimation to the amplitude spectrum, the proposed system achieves better performance than the adaptive beamformer in the case when the number of sound sources exceeds the number of microphones.

A simplified analysis is presented for the reverse link capacity of DS-CDMA mobile radio with transmit power control (TPC) based on measurement of signal-to-interference plus background noise (SIR) when users require different levels of quality. The link capacity is defined as the maximum achievable sum of the required SIRs, and the increase in transmit power due to SIR-based TPC is discussed. Also analyzed is the total link capacity when narrowband DS-CDMA systems share the radio spectrum of a wideband system. The capacity loss due to non-uniform use of the spectrum is discussed.

In this paper, we describe effects of oddcorrelation functions and band-limitation filters for direct-wave reception systems using broadband spread-spectrum (B-SS) techniques. The receiver of this system is synchronized to the direct-wave. First, the effects of odd-correlation functions are investigated by using M-sequences and random sequences. The effects of even-correlation functions for those sequences can be easily obtained by using results of effects of odd-correlation functions for random sequences. Here we derive a novel function of odd-correlation variance for M-sequence, which is obtained theoretically. Consequently, we show the advantage of M-sequence which is used as spreading sequence. As a reason, in the odd-correlation function of M-sequence, small values are taken near the synchronous phase where harmful scattered-waves exist, strongly. Next, the effects of both odd-correlation function and band-limitation filter are studied by using several kinds of filters. Here we discuss the difference of characteristics in case that despreading sequence of bandlimited pulse or that of rectangular pulse is used in the correlator of the receiver. The technique despreading by rectangular pulse can be achieved a high speed signal processing and equipment miniaturizing because of utilization of switching circuit. We show the advantage of despreading sequence of rectangular pulse, when the limitation bandwidth of transmitting signal takes a small value. Because the characteristics of the correlation function between transmitting sequence of bandlimited pulse and despreading sequence of rectangular pulse can be kept better than that between the transmitting sequence and despreading sequence of bandlimited pulse. As these results, in severe bandlimited direct-wave reception systems using B-SS techniques, M-sequence of rectangular pulse as despreading sequence is most suitable.

This paper deals with performance evaluation of CDMA based on DS/SS/GMSK signaling with the differential detection over multipath Rayleigh fading channels. To demodulate DS/SS/GMSK signals, we consider differential detection, which does not need a carrier recovery. The bit-error-rate performance is evaluated in the presence of thermal noise and multipleaccess interferences under the multipath Rayleigh fading environment. To improve the performance, we also consider adoption of a RAKE receiver.

In this paper, a simple frame synchronization system for M-ary/SS communication systems is proposed, and synchronization performance and the resulting bit error rate performance are analyzed. The frame synchronization system uses racing counters and framing chips which are added to spreading sequences. M-ary/SS communication systems can improve bit error rate performance under the condition in which there is an additive white gaussian noise. Synchronization of M-ary/SS communication systems is difficult, however, because M-ary/SS communication systems have several spreading sequences. The authors proposed the simple frame synchronization system which uses only one chip in the spreading sequence as a framing signal. This system needs a long time for initial acquisition as the frame length is longer. The proposed system in this paper can make initial acquisition time short by increasing the number of framing chips. The proposed system corresponds to the conventional system when the number of framing chips is l. As the result, it is shown that several framing chips contribute to decrease the initial acquisition time. Moreover, the frame synchronization system can be applied to asynchronous M-ary/SSMA system when different framing chip pattern is assigned to each user.

This paper describes a millimeter-wave (MMW) transmission system over fiber-optic links applicable for high-speed mobile communications. The system design is presented considering both the MMW radio link and fiber-optic link. To prove the capability of the MMW fiber-optic link, an experimental system has been constructed. The results of in-door transmission experiments showed that this system could be capable of transmitting 118 Mbps digital signals with a BER of less than 10-6. The developed system is easily applicable to a wireless access system which can connect subscribers with a broadband optical fiber network.

In this paper, the bit error rate (BER) performance of the Spread Spectrum communication system with Constrained Spreading Codes (SS-CSC) is analyzed. The BER of the SS-CSC system is the same as that of the Bi-orthogonal system. Moreover, the frequency utilization efficiency of the SS-CSC system is better than that of the Bi-orthogonal system when K 10 and N = 3.