Indoor free space optical (FSO) communication technology that provides high-speed connectivity to edge users is expected to be introduced in the near future mobile communication system, where the silicon photonics solid-state beam scanning device is a promising tool because of its low cost, long-term reliability, and other beneficial properties. However, the current two-dimensional beam scanning devices using grating coupler arrays have difficulty in increasing the transmission capacity because of bandwidth regulation. To solve the problem, we have introduced a broadband surface optical coupler, “elephant coupler,” which has great potential for combining wavelength and spatial division multiplexing technologies into the beam scanning device, as an alternative to grating couplers. The prototype port-selective silicon beam scanning device fabricated using a 300 mm CMOS pilot line achieved broadband optical beam emission with a 1 dB-loss bandwidth of 40 nm and demonstrated beam scanning using an imaging lens. The device has also exhibited free-space signal transmission of non-return-to-zero on-off-keying signals at 10 Gbps over a wide wavelength range of 60 nm. In this paper, we present an overview of the developed beam scanning device. Furthermore, the theoretical design guidelines for indoor mobile FSO communication are discussed.

This paper presents a meta-structured circular polarized array antenna with wide scan angle. In order to widen the scanning angle of array antennas, this paper investigates unit antenna beamwidth and the coupling effects between array elements, both of which directly affect the steering performance. As a result, the optimal array distance, the mode configuration, and the antenna structure are elucidated. By using the features of the miniaturized mu-zero resonance (MZR) antenna, it is possible to design the antenna at optimum array distance for wide beamwidth. In addition, by modifying via position and gap configuration of the antenna, it is possible to optimize the mode configuration for optimal isolation. Finally, the 3dB steerable angle of 66° is successfully demonstrated using a 1x8 MZR CP antenna array without any additional decoupling structure. The measured beam patterns at a scan angle of 0°, 22°, 44°, and 66°agree well with the simulated beam patterns.

A novel two-dimensional (2D) beam scanning antenna array using composite right/left-handed (CRLH) leaky-wave antennas (LWAs) is proposed. The antenna array consists of a set of CRLH LWAs and a Butler matrix (BM) feeding network. The direction of the beam can be scanned two-dimensionally in one plane by changing frequency and in the other plane by switching the input ports of the BM. A four-element antenna array in the microstrip line configuration operating at 10.5 GHz is designed with the assistance of full-wave simulations based on the method of moment (MoM) and the finite-element method (FEM). The antenna array is fabricated and radiation characteristics are measured. The wide range 2D beam scanning operation with the angle from -30 deg to +25 deg in one plane by sweeping frequency from 10.25 GHz to 10.7 GHz and with four discrete angles of -46 deg, -15 deg, +10 deg, and +35 deg in the other plane by switching the input port is achieved.

A novel structure for a frequency-independent steerable composite right/left-handed (CRLH) leaky wave (LW) antenna in the millimeter-wave band is proposed. This has the advantages of wide beam scanning and low profile, and is a suitable structure for mass-production. The proposed antenna has features wherein a movable dielectric slab is placed above the CRLH LW antenna, and the radiation angle can be steered by changing the distance between the slab and the antenna using compact actuators. Moreover, slots are added to the antenna to control the aperture amplitude distribution of the array antenna in order to enhance aperture efficiency. A prototype CRLH LW antenna has been fabricated with these slots, and backward-to-forward beam scanning characteristics at 76 GHz have been demonstrated successfully by measurement. A wide scanning angle from 73 to 114 deg. has been achieved experimentally. The aperture efficiency is 25.3%.

A series-fed beam-scanning array employing a MUlti-Stage Configured microstrip Antenna with Tunable reactance devices (MUSCAT) is proposed. The proposed antenna significantly expands the beam scanning range and achieves high efficiency. This antenna comprises unit element groups, whose elements are placed close to each other and employ tunable reactance devices. Analyses and experiments on the unit element groups show that their multi-stage configuration extends the phase shift range and increases the radiation efficiency, e.g., a 120phase shift and the radiation efficiency of more than 50% are achieved, when three stages are employed. The radiation pattern of the fabricated MUSCAT array antenna comprising eight unit element groups is measured. A beam scanning range of 27, which is greater than twice the beam scanning range of a non-multi-stage configuration, is achieved.

A mechanical phase shifter is designed for beam scanning in co-phase fed single-layer slotted waveguide arrays. The multiple-way power divider in this array consists of a series of π-junctions with one guide wavelength spacing in a feed waveguide. The movable narrow walls placed between the π-junctions perturb the guide wavelength as well as the phase of output ports. Method of Moment (MoM) analysis for one unit consisting of one movable plate and two junctions is conducted to estimate the available phase shift as well as the degradation of reflection. A phase shift of 86 degrees is predicted between two π-junctions under the condition of reflection below -20 dB; experiments at 4 GHz confirmed the design. The beam scanning capability of the arrays is also surveyed and the beam-scanning of about 10 degrees is predicted.

Active frequency-tuning beam-scanning leaky-mode antenna arrays have been demonstrated in this paper. These antennas integrated one or several microstrip leaky-wave antenna elements with a single varactor-tuned HEMT VCO as an active source. Noted that the measured scan angles of the 11 and 14 antennas were approximately 24 and the scanning range of the 12 antenna was 20. Furthermore, reflected wave due to the open end of each leaky-wave antenna element has been suppressed by the symmetric configuration of this antenna array and the antenna efficiency increases. When comparing with the measured radiation pattern of the single element antenna, we found that the 12 and 14 antenna arrays can effectively suppress the reflected power by more than 5.5 dB and 10.5 dB, respectively, at 10.2 GHz. The power gain are more than 2 dB and 3.16 dB higher than the single element antenna with a measured EIRP of 18.67 dBm.

In coupled oscillator arrays, it is possible to control the inter-element phase shift up to 180 by free-running frequency distribution based on injection-locking phenomenon. In this paper, a new technique to control the inter-element phase shift electronically up to the maximum extent of 360 is reported. Oscillators are unilaterally coupled to the preceding oscillator through one of the two paths, which differ from each other 180 in electrical length and each includes an amplifier. Turning on the desired amplifier one can control the phase shift either -180 to 0 or 0 to 180. The technique was applied in a three-element oscillator array each coupled to a patch antenna via a round aperture. The radiation beam of the array could be scanned 47 in total.