In this paper, a novel Enhanced Spatial Modulation-based Orthogonal Time Frequency Space (ESM-OTFS) is proposed to maximize the benefits of enhanced spatial modulation (ESM) and orthogonal time frequency space (OTFS) transmission. The primary objective of this novel modulation is to enhance transmission reliability, meeting the demanding requirements of high transmission rates and rapid data transfer in future wireless communication systems. The paper initially outlines the system model and specific signal processing techniques employed in ESM-OTFS. Furthermore, a novel detector based on sparse signal estimation is presented specifically for ESM-OTFS. The sparse signal estimation is performed using a fully factorized posterior approximation using Variational Bayesian Inference that leads to a low complexity solution without any matrix inversions. Simulation results indicate that ESM-OTFS surpasses traditional spatial modulation-based OTFS, and the newly introduced detection algorithm outperforms other linear detection methods.

This letter introduces an innovation for the heterogeneous storage architecture of AI chips, specifically focusing on the integration of six transistors(6T) and eight transistors(8T) hybrid SRAM. Traditional approaches to reducing SRAM power consumption typically involve lowering the operating voltage, a method that often substantially diminishes the recognition rate of neural networks. However, the innovative design detailed in this letter amalgamates the strengths of both SRAM types. It operates at a voltage lower than conventional SRAM, thereby significantly reducing the power consumption in neural networks without compromising performance.

The combination of multiple-input multiple-output (MIMO) technology and sparse code multiple access (SCMA) can significantly enhance the spectral efficiency of future wireless communication networks. However, the receiver design for downlink MIMO-SCMA systems faces challenges in developing multi-user detection (MUD) schemes that achieve both low latency and low bit error rate (BER). The separated detection scheme in the MIMO-SCMA system involves performing MIMO detection first to obtain estimated signals, followed by SCMA decoding. We propose an enhanced separated detection scheme based on lightweight graph neural networks (GNNs). In this scheme, we raise the concept of coordinate point relay and full-category training, which allow for the substitution of the conventional message passing algorithm (MPA) in SCMA decoding with image classification techniques based on deep learning (DL). The features of the images used for training encompass crucial information such as the amplitude and phase of estimated signals, as well as channel characteristics they have encountered. Furthermore, various types of images demonstrate distinct directional trends, contributing additional features that enhance the precision of classification by GNNs. Simulation results demonstrate that the enhanced separated detection scheme outperforms existing separated and joint detection schemes in terms of computational complexity, while having a better BER performance than the joint detection schemes at high Eb/N0 (energy per bit to noise power spectral density ratio) values.

Sparse code division multiple access (SCMA) is a non-orthogonal multiple access (NOMA) technology that can improve frequency band utilization and allow many users to share quite a few resource elements (REs). This paper uses the modulation of lattice theory to develop a systematic construction procedure for the design of SCMA codebooks under Gaussian channel environments that can achieve near-optimal designs, especially for cases that consider large-scale SCMA parameters. However, under the condition of large-scale SCMA parameters, the mother constellation (MC) points will overlap, which can be solved by the method of the partial dimensions transformation (PDT). More importantly, we consider the upper bounded error probability of the signal transmission in the AWGN channels, and design a codeword allocation method to reduce the inter symbol interference (ISI) on the same RE. Simulation results show that under different codebook sizes and different overload rates, using two different message passing algorithms (MPA) to verify, the codebook proposed in this paper has a bit error rate (BER) significantly better than the reference codebooks, moreover the convergence time does not exceed that of the reference codebooks.

The newly proposed orthogonal time frequency space (OTFS) system exhibits excellent error performance on high-Doppler fading channels. However, the rectangular prototype window function (PWF) inherent in OTFS leads to high out-of-band emission (OOBE), which reduces the spectral efficiency in multi-user scenarios. To this end, this paper presents an OTFS system based on bi-orthogonal frequency division multiplexing (OTFS-BFDM) modulation. In OTFS-BFDM systems, PWFs with bi-orthogonal properties can be optimized to provide lower OOBE than OTFS, which is a special case with rectangular PWF. We further derive that the OTFS-BFDM system is sparsely-connected so that the low-complexity message passing (MP) decoding algorithm can be adopted. Moreover, the power spectral density, peak to average power ratio (PAPR) and bit error rate (BER) of the OTFS-BFDM system with different PWFs are compared. Simulation results show that: i) the use of BFDM modulation significantly inhibits the OOBE of OTFS system; ii) the better the frequency-domain localization of PWFs, the smaller the BER and PAPR of OTFS-BFDM system.

In this letter, we derive a novel and accurate closed-form bit error rate (BER) approximation of the optical wireless communications (OWC) systems for the sub-carrier intensity modulation (SIM) employing binary phase-shift keying (BPSK) with multiple transmit and single receive apertures over strong atmospheric turbulence channels, which makes it possible to effectively investigate and predict the BER performance for various system configurations. Furthermore, we also derive a concise asymptotic BER formula to quantitatively evaluate the asymptotically achievable error performance (i.e., asymptotic diversity and combining gains) in the high signal-to-noise (SNR) regimes. Some numerical results are provided to corroborate the accuracy and effectiveness of our theoretical expressions.

In this letter, we investigate tight analytical and asymptotic upper bounds for bit error rate (BER) of constitutional codes over exponentially correlated Nakagami-m fading channels. Specifically, we derive the BER expression depending on an exact closed-form formula for pairwise error event probabilities (PEEP). Moreover, the corresponding asymptotic analysis in high signal-to-noise ratio (SNR) regime is also explored, which is verified via numerical results. This allows us to have explicit insights on the achievable coding gain and diversity order.

Inter-channel crosstalk is one of the limiting factors in multichannel optical systems. This paper presents a theoretical analysis of the bit-error-rate (BER) performance of quadrature phase shift keying (QPSK) and quadrature amplitude modulation (QAM) signals influenced by multiple crosstalk channels. The field distribution of multiple crosstalk channels in the constellation map is calculated. The BER of the QPSK/QAM signal, onto which the crosstalk light is superimposed, is then evaluated for a varying number of crosstalk channels under the condition that the total crosstalk power is constant. The results quantitatively confirm that as the channel number increases, the BER degradation caused by crosstalk light approaches that caused by Gaussian noise light. It is also confirmed that the degradations caused by crosstalk light and Gaussian light are similar for QAM signals of high-level modulation.

Inter-channel crosstalk is one of the crucial issues in multichannel optical systems. Conventional studies assume that the crosstalk and the main signals have identical format. The present study, in contrast, considers different signal formats for the main and crosstalk lights, and shows that bit error degradation is different depending on the modulation format. Statistical properties of the crosstalk are also investigated. The result quantitatively confirms that a crosstalk light whose signal distribution is closer to a Gaussian profile causes larger degradation.

This paper presents the bit error rate (BER) performance of human body communication (HBC) receivers in interference-rich environments. The BER performance was measured while applying an interference signal to the HBC receiver to consider the effect of receiver performance on BER performance. During the measurement, a signal attenuator was used to mimic the signal loss of the human body channel, which improved the repeatability of the measurement results. The measurement results showed that HBC is robust against the interference when frequency selective digital transmission (FSDT) is used as a modulation scheme. The BER performance in this paper can be effectively used to evaluate a communication performance of HBC.

Quasi cyclic LDPC (QC-LDPC) codes consisting of circulant permutation matrices (CPM-QC-LDPC) are one of the most attractive types of LDPC codes due to their many advantages. In this paper, we mainly do some research on CPM-QC-LDPC codes. We first propose a two-stage decoding scheme mainly based on parity check matrix transform (MT), which can efficiently improve the bit error rate performance. To optimize the tradeoff between hardware implementation complexity and decoding performance, an improved method that combines our proposed MT scheme with the existing CPM-RID decoding scheme is presented. An experiment shows that both schemes can improve the bit error rate (BER) performance. Finally, we show that the MT decoding mechanism can be applied to other types of LDPC codes. We apply the MT scheme to random LDPC codes and show that it can efficiently lower the error floor.

We propose a novel bit error rate (BER) analysis model of weighted-type fractional Fourier transform (WFRFT)-based systems with WFRFT order offset Δα. By using the traditional BPSK BER analysis method, we deduce the equivalent signal noise ratio (SNR), model the interference in the channel as a Gaussian noise with non-zero mean, and provide a theoretical BER expression of the proposed system. Simulation results show that its theoretical BER performance well matches the empirical performance, which demonstrates that the theoretical BER analysis proposed in this paper is reliable.

This paper shows an optimal spreading sequence in the Weyl sequence class, which is similar to the set of the Oppermann sequences for asynchronous CDMA systems. Sequences in Weyl sequence class have the desired property that the order of cross-correlation is low. Therefore, sequences in the Weyl sequence class are expected to minimize the inter-symbol interference. We evaluate the upper bound of cross-correlation and odd cross-correlation of spreading sequences in the Weyl sequence class and construct the optimization problem: minimize the upper bound of the absolute values of cross-correlation and odd cross-correlation. Since our optimization problem is convex, we can derive the optimal spreading sequences as the global solution of the problem. We show their signal to interference plus noise ratio (SINR) in a special case. From this result, we propose how the initial elements are assigned, that is, how spreading sequences are assigned to each users. In an asynchronous CDMA system, we also numerically compare our spreading sequences with other ones, the Gold codes, the Oppermann sequences, the optimal Chebyshev spreading sequences and the SP sequences in Bit Error Rate. Our spreading sequence, which yields the global solution, has the highest performance among the other spreading sequences tested.

In this letter, efficient closed-form formulas for the exact and asymptotic average bit error probability (ABEP) of space shift keying (SSK) systems are derived over Rayleigh fading channels with imperfect channel state information (CSI). Specifically, for a generic 2×NR multiple-input multiple-output (MIMO) system with the maximum likelihood (ML) detection, the impact of imperfect CSI is taken into consideration in terms of two types of channel estimation errors with the fixed variance and the variance as a function of the number of pilot symbols and signal-to-noise ratio (SNR). Then, the explicit evaluations of the bit error floor (BEF) and asymptotic SNR loss are carried out based on the derived asymptotic ABEP formula, which accounts for the impact of imperfect CSI on the SSK system. The numerical results are presented to validate the exactness of our theoretical analysis.

A comprehensive model is presented for estimating the bit error rate (BER) of write disturbance in a resistive memory composed of a cross-point array. While writing a datum into the selected address, the non-selected addresses are biased by word-line (WL) and bit-line (BL). The stored datum in the non-selected addresses will be disturbed if the bias is large enough. It is necessary for the current flowing through the non-selected address to be calculated in order to estimate the BER of the write disturbance. Since it takes a long time to calculate the current flowing in a large-scale cross-point array, several simplified circuits have been utilized to decrease the calculating time. However, these simplified circuits are available to the selected address, not to the non-selected one. In this paper, new simplified circuits are proposed for calculating the current flowing through the non-selected address. The proposed and the conventional simplified circuits are used, and on that basis the trade-off between the write disturbance and the write error is discussed. Furthermore, the error correcting code (ECC) is introduced to improve the trade-off and to provide the low-cost memory chip matching current production lines.

Wireless body area networks (BANs) are attracting much attention due to their suitable for healthcare and medical applications. Unfortunately, electrostatic discharge (ESD) is a major electromagnetic (EM) noise source that can degrade wireless communication performance. In this study, we measure EM noise power in the 2.4GHz and 30MHz bands for indirect ESD testing specified in IEC 61000-4-2 standard, and derived a statistical ESD noise model from the measurement results. The ESD noise power was found to follow a lognormal distribution in both 2.4GHz and 30MHz bands. We use this ESD noise model to conduct bit error rate (BER) simulations in a communication channel with additive white Gaussian noise (AWGN) plus ESD noise at 2.4GHz and 30MHz bands. The result is that the BER performance is virtually the same in both bands, and decreases with the signal to noise power ratio (SNR). It is also shown that an error floor exists in the BER performances at both frequencies, which, if the ESD noise power is larger than the Gaussian noise, cannot be improved by increasing the SNR. Although the ESD noise power at 2.4GHz band is nearly 30dB smaller than that at 30MHz band, the signal attenuation along the human body at 2.4GHz band is much larger compared to 30MHz band. This may yield a similar SNR level at 30MHz and 2.4GHz bands in an ESD-dominated environment, so that the 2.4GHz band does not have an obvious merit for BAN applications. Since there are so many in-band interference sources at 2.4GHz band, the 30MHz band seems more promising for vital data transmission in a BAN scenario even in an ESD-dominated environment.

In this paper, a threshold-based I-Q diversity combining scheme for ultra-high frequency (UHF) radio frequency identification (RFID) readers with a quadrature receiver is proposed in the aspect of improving the tag detection performance. In addition, the performance of the proposed scheme is evaluated as the closed-form expressions. In particular, its statistical characteristics are detailed and its performance is compared to that of conventional schemes over independent and identically distributed Rician fading conditions in terms of average signal-to-noise ratio (SNR), bit error rate (BER), and the average number of required combining process. Numerical results indicate that the proposed scheme enables processing power control through threshold control while meeting the required quality of service compared to conventional schemes.

This paper analyzes the transmission performances of visible light communication (VLC) based on unipolar orthogonal frequency division multiplexing (OFDM), which is compatible with intensity modulation and direct detection (IM/DD). Three existing unipolar OFDM schemes, namely DC biased optical OFDM (DCO-OFDM), asymmetrically clipped optical OFDM (ACO-OFDM), and flip-OFDM are investigated and compared. While these three schemes have been analyzed for indoor optical wireless communication (OWC) subject to the limitation on the transmit optical power, they have not been carefully investigated and compared for VLC when a large transmit power is available due to the illumination requirement, and the signal dynamic range (DR) becomes the main limitation. For the analysis, DR expressions of DCO-OFDM, ACO-OFDM, and flip-OFDM signals are first derived. Then, the bit error rate (BER) expression of each unipolar OFDM scheme is derived in terms of the DR. For data rates in the range of 1-10Mbps, under the system parameters based on typical indoor environments, DCO-OFDM is observed to outperform the other two schemes. This superiority of DCO-OFDM is in contrast with previously reported results that indicate the attractiveness of ACO-OFDM and flip-OFDM over DCO-OFDM when the transmit optical power is the main limitation. Finally, light dimming is considered to identify the illumination level below which DCO-OFDM loses this superiority.

In this paper, a low-complexity precoding scheme for minimizing the bit error rate (BER) subject to fixed power constraint for distributed antenna systems with non-Kronecker correlation over spatially correlated Rayleigh fading channels is presented. Based on an approximated BER bound and a newly defined compressed signal-to-noise ratio (CSNR) criterion, closed-form expressions of power allocation and beamforming matrix are derived for the developed precoding scheme. This scheme not only has the calculation of the power allocation less than and also obtain the BER performance close to that of the existing optimal precoding scheme. Simulation results show that the proposed scheme can provide BER lower than the equal power allocation and single mode beamforming scheme, has almost the same performance as the existing optimal scheme.

Wireless body area networks (BANs) are attracting great attention as a future technology of wireless networks for healthcare and medical applications. Wireless BANs can generally be divided into two categories, i.e., wearable BANs and implant BANs. However, the performance requirements and channel propagation characteristics of these two kinds of BANs are quite different from each other, that is, wireless signals are approximately transmitted along the human body as a surface wave in wearable BANs, on the other hand, the signals are transmitted through the human tissues in implant BANs. As an effective solution for this problem, this paper first introduces a dual-mode communication system, which is composed of transmitters for in-body and on-body communications and a receiver for both communications. Then, we evaluate the bit error rate (BER) performance of the dual-mode communication system via computer simulations based on realistic channel models, which can reasonably represent the propagation characteristics of on-body and in-body communications. Finally, we conduct a link budget analysis based on the derived BER performances and discuss the link parameters including system margin, maximum link distance, data rate and required transmit power. Our computer simulation results and analysis results demonstrate the feasibility of the dual-mode communication system in wireless BANs.