The search functionality is under construction.
The search functionality is under construction.

Single 1. 5 V Operation Power Amplifier MMIC with SrTiO3 Capacitors for 2. 4 GHz Wireless Applications

Takeshi B. NISHIMURA, Naotaka IWATA, Keiko YAMAGUCHI, Masatoshi TOMITA, Yasunori BITO, Koichi TAKEMURA, Yoichi MIYASAKA

  • Full Text Views

    0

  • Cite this

Summary :

This paper describes design approach and power performance of a single 1. 5 V operation two-stage power amplifier MMIC for 2. 4 GHz wireless local area network applications. The MMIC with 0. 760. 96 mm2 area includes SrTiO3 (STO) capacitors with a high capacitance density of 8. 0 fF/µm2 and double-doped AlGaAs/InGaAs/AlGaAs heterojunction FETs with a shallow threshold voltage of -0. 24 V. Utilizing a series STO capacitor and a shunt inductor as an output matching circuit, the total chip size was reduced by 40% as compared with an MMIC utilizing SiNx capacitors. Under single 1.5 V operation, the developed MMIC delivered an output power of 110 mW (20.4 dBm) and a power-added efficiency (PAE) of 36.7% with an associated gain of 20.0 dB at 2.4 GHz. Even operated at a drain bias voltage of 0.8 V, the MMIC exhibited a high PAE of 31.0%.

Publication
IEICE TRANSACTIONS on Electronics Vol.E81-C No.6 pp.898-903
Publication Date
1998/06/25
Publicized
Online ISSN
DOI
Type of Manuscript
Special Section PAPER (Special Issue on Microwave and Millimeter-Wave Module Technology)
Category
Semiconductor Devices and Amplifiers

Authors

Keyword