We newly propose the first lateral mode selective active multimode interferometer laser diode. The design principle is to arrange identical propagation path of different lateral mode. Thanks to multimode waveguide structure, 0th mode and 1st order mode has individual propagation path within one device. Individual lasing of fundamental mode as well as first mode was confirmed successfully.

We propose a cyclic sleep control technique for backup resources in reconfigurable optical add/drop multiplexer (ROADM) systems to simultaneously achieve power savings and high-speed recovery from failures. Processes to check the reliability of backup resources, backup transponders and paths, are also provided in the control technique. The proposed technique uses sleep mode where backup transponders are powered down to minimize power for power savings. At least one of the backup transponders is always activated after self-checking using the loopback fiber connection in the ROADM and it becomes a shared backup for working transponders to enable high-speed recovery from failures. This activated backup transponder is powered down again after the next transponder is activated. These state transitions are cyclically applied to each backup transponder. This “cyclic” aspect of operation enables network operators to continuously monitor the reliability for all backup resources with the sleep mode. The activated backup transponders at both ends of the path are used in checking the reliability of backup paths. Therefore, all backup resources, both transponders and paths, can be regularly checked with the sleep mode to ensure data are stably forwarded. We estimated the power consumption with this technique under various conditions and found a trade-off between power reduction and the recovery capabilities from failures. We achieved more than 34% power saving of backup transponders maintaining the failure recovery time within 50ms in experiments. Furthermore, we confirmed the reliability of backup paths in experiments using backup transponders with the cyclic sleep control technique. These results indicated that the proposed control technique is promising in dramatically and reliably reducing the power consumption of backup resources.

Laser diode capable of high speed direct modulation is one of the key solution for short distance applications due to their low power consumption, low cost and small size features. Realization of high modulation bandwidth for direct modulated laser maintaining the above mentioned feature is needed to enhance the short distance, low cost data transmission. One promising approach to enhance the modulation speed is to increase the photon density to achieve high modulation bandwidth. So to achieve this target, 1.55 $mu$m InGaAsP/InGaAsP multiple quantum well (MQW) asymmetric active multimode interferometer laser diode (active MMI-LD) has been demonstrated [1]. The split pumping concept has been applied for the active MMI-LD and significant enhancement of electrical to optical 3 dB down frequency bandwidth (f$_{mathrm{3dB}})$ up to 8 GHz has been successfully confirmed. The reported high bandwidth for split pump active MMI-LD is around 3.5 times higher than the previously reported maximum 3 dB bandwidth (2.3 GHz) of active MMI-LD without split pumping section. That shows, the splitted multimode pumping section behind the electrically isolated modulation section can potentially improve the modulation bandwidth of active MMI-LD. Clear and open eye diagram had also been confirmed for 2.5 Gbps, (2$^{mathrm{7}}$-1) pseudo random bit sequence (PRBS) modulation.

This paper reviews next generation optical access network standardization activities, focusing on 10-Gbps class TDM PON, and introduces key technologies for their co-existence with deployed systems.

Quantum key distribution (QKD) systems can generate unconditionally secure common keys between remote users. Improvements of QKD performance, particularly in key generation rate, have been required to meet current network traffic. A high-speed QKD system should be equipped with low-loss receivers with high visibility, highly efficient photon detectors with small dark count probability. A solution to these issues is to employ planar lightwave circuit (PLC) interferometers, single photon detection circuits and modules, together with multi-wavelength channels transmission using wavelength division multiplexing (WDM) technique.

A novel 10-Gb/s fast acquisition bit-synchronization circuit for use in a Tb/s throughput optical packet switch has been developed. The circuit is a best-sampled-data-select type based on multiple phase-clocks, and it processes the asynchronous input packets into a synchronous data stream in a serial manner, which is advantageous in terms of circuit scale and consumption power compared with the parallel processing type. The circuit was developed using Si-bipolar ultrahigh-speed gate arrays and it was used to develop a 10-Gb/s optical asynchronous packet receiver module. The core logic of this circuit module required about 100 gates, consume 6 W, and the size of the module was reduced to only 170 mm (W)130 mm (D) 10 mm (H). Using the receiver module, a fast acquisition time of 9 bits and receiver sensitivity penalty of less than 1.5 dB due to re-synchronization were measured.

Research and development of a multi-degree colorless, directionless and contentionless reconfigurable optical add-drop multiplexer (CDC-ROADM) has recently been attracting a lot of attention. A large-scale transponder aggregator (TPA) is indispensable for providing high-capacity flexible connections to optical networks. In this paper, we report our study of the requirements for the TPA, which is a key technology for achieving flexible optical networks. To meet the requirements, we have developed an 848 TPA prototype based on Si photonics technology. This prototype was made with a few 88 Si optical switches and designed to be used with a commercial ROADM system. The 88 Si optical switches are made by integrating 152 Mach Zehnder (MZ) Thermo Optoelectronic (TO) 22 optical switch elements. A double gate structure is introduced to achieve the high extinction ratio (ER) required for optical communication. To the best of our knowledge, this is the world's first Si-TPA that can be used with a commercial ROADM system. By evaluating the basic optical characteristics utilizing real-time 100 Gbps digital coherent detection as one of today's practical technologies and a 4.4 THz spectral bandwidth 20 Tbps super-channel with digital coherent detection, as a promising future technology, we have confirmed that our prototype Si-TPA has the potential for practical use and future extensibility.

A novel 10-Gb/s fast acquisition bit-synchronization circuit for use in a Tb/s throughput optical packet switch has been developed. The circuit is a best-sampled-data-select type based on multiple phase-clocks, and it processes the asynchronous input packets into a synchronous data stream in a serial manner, which is advantageous in terms of circuit scale and consumption power compared with the parallel processing type. The circuit was developed using Si-bipolar ultrahigh-speed gate arrays and it was used to develop a 10-Gb/s optical asynchronous packet receiver module. The core logic of this circuit module required about 100 gates, consume 6 W, and the size of the module was reduced to only 170 mm (W)130 mm (D) 10 mm (H). Using the receiver module, a fast acquisition time of 9 bits and receiver sensitivity penalty of less than 1.5 dB due to re-synchronization were measured.

This paper proposes Photonic Core Node based on a 2.56-Terabit/s opto-electronic switching fabric, which can economically handle the rapidly increasing multimedia traffics, such as Internet traffic. We have successfully developed the first prototype of Photonic Core Node. The prototype consists of a single-stage full-crossbar opto-electronic switching fabric, super-packet buffers for input queuing, and a desynchronized-round-robin scheduler. The switching fabric is upgradable up to 2.56 Tb/s, and employs wavelength-division-multiplexing techniques, which dramatically reduce the total number of optical switching elements down to one-eighth the number of those used in a conventional switching fabric. The super-packet buffer assembles 16 ATM cells routed to the same output port into a single fixed-length packet. The super-packet-switching scheme drastically reduces the overhead of optical switching from 32 to 2.9%, although it tends to decrease effective throughput. The desynchronized-round-robin scheduler maintains nearly 100% effective throughput for random traffic, recursively resolving the contention of connection requests in one scheduling routine while keeping fairness in a round robin manner. The proposed Photonic Core Node can accommodate not only ATM switching but also WDM optical path grooming/multiplexing, and IP routing by using IP input buffer interfaces, because optical switches are bit-rate/format-independent.

This paper proposes Photonic Core Node based on a 2.56-Terabit/s opto-electronic switching fabric, which can economically handle the rapidly increasing multimedia traffics, such as Internet traffic. We have successfully developed the first prototype of Photonic Core Node. The prototype consists of a single-stage full-crossbar opto-electronic switching fabric, super-packet buffers for input queuing, and a desynchronized-round-robin scheduler. The switching fabric is upgradable up to 2.56 Tb/s, and employs wavelength-division-multiplexing techniques, which dramatically reduce the total number of optical switching elements down to one-eighth the number of those used in a conventional switching fabric. The super-packet buffer assembles 16 ATM cells routed to the same output port into a single fixed-length packet. The super-packet-switching scheme drastically reduces the overhead of optical switching from 32 to 2.9%, although it tends to decrease effective throughput. The desynchronized-round-robin scheduler maintains nearly 100% effective throughput for random traffic, recursively resolving the contention of connection requests in one scheduling routine while keeping fairness in a round robin manner. The proposed Photonic Core Node can accommodate not only ATM switching but also WDM optical path grooming/multiplexing, and IP routing by using IP input buffer interfaces, because optical switches are bit-rate/format-independent.